In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Uncoupling Tool for Tension Lock Couplings – Essential Layout Accessory for Effortless Uncoupling
This handy tool is specifically designed to assist with the uncoupling of tension lock couplings commonly used in model railway setups. Perfect for hobbyists and model train enthusiasts, it provides a simple and efficient way to separate rolling stock without causing damage or requiring excessive force. Its ergonomic design allows for precise control and easy access in tight layout spaces, making it an indispensable accessory for smooth and hassle-free operation of your model railway.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Handy Track Laying Accessory for N Gauge to help fitting Rail Joiners to Code 55 and Code 80 Rail Joiners.This N Gauge 'Extended Rail Joiner Mate' is designed to help when laying trackwork.Insert your rail joiner into the slot in the end of the Rail Joiner Mate and slide into place.
Expanded from our very popular Rail joiner Mates, This Allows More Leverage And Easier To Handle.
Pack includes 1 x Extended Rail Joiner Mate.Handy Track Laying Accessory for N Gauge to help fitting Rail Joiners to Code 55 and Code 80 Rail.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Caddy-Mate3
Storage caddy for your controller handset, keep it easy to hand.
For one NCE Power Cab controller handset.One Caddy-Mate3 suitable for the NCE Power Cab type controller handset.
(alternative Caddy-Mate and Caddy-Mate2 are available for the Gaugemaster Prodigy controllers)
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment - Registration Arms and Catenary Wire Supports for Mk1 Type A or Type B Structures
Typical of the style fitted on the West Coast Main Line.SET E11-5 - product code 2WH0901105PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment - Registration Arms and Catenary Wire Supports for Mk1 Type A or Type B Structures
Typical of the style fitted on the West Coast Main Line.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E11-5 - product code 2WH0901105
This set is specifically designed to be used with our Mk1 OHLE structure kits E11-1, E11-2, E11-11 and E11-12 (not included).This set E11-5 includes the following parts:-
- Two (2) Registration Arms
- Two (2) Catenary Wire Supports
The parts are fitted to the side of the span of your assembled Mk1 OHLE Structure and may need to be attached with a very small spot of glue.
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
TT:120 Track Guide Templates - 36mm Track Centre Spacer (Pack of 2)Pack Includes:
2 x 36mm Track Centre Spacer
Works With Peco & Hornby TT:120 Track
Protective Film On Product Will Need To Be Removed Before Use
Back In Stock Soon
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - Mk1 Type B Structure Kit with Lattice Masts and a 135mm Span for up to 4 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.SET E11-12 - product code 2WH0901112PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment Portal Structure Kit - Mk1 Type B Structure Kit with Lattice Masts and a 135mm Span for up to 4 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E11-12 - product code 2WH0901112This set E11-12 includes parts to construct one (1) Mk1 Type B structure for up to 4 Tracks (2 Lattice Masts, 2 Bases and 1 Span section).
The two Pile Driven style Bases included in the kit come with magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the Mk1 Style OHLE are available to Purchase Separately as follows:-
SET E11-5 - Mk1 Registration Arms and Catenary Wire Supports for Type A & B Structures (SET E11-5) - product code 2WH0901105
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E11-12) dimensions:-
Maximum height above baseboard (including base) - 65mm
Overall length of structure (across the tracks) - 149mm
Max width of structure/base - 8mm
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Concrete Lineside Huts, smaller type. TT:120 ScalePack of 3, including 3 different styles of hut.Smaller Type Concrete Lineside Huts, seen all over the railway network; often in yards, depots or carriage sidings.TT:120 ScalePack of 3 huts-- 1 with door on the right (15mm x 23mm x 17mm high)- 1 with door in the centre (14mm x 17mm x 16mm high)- 1 with door on the right (17mm x 20mm x 17mm high)Supplied unpainted, a coat of primer is recommended before painting to suit your layout.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Maintenance Hoist and Frame Kit including, sliding hoist, chain, hook and ground supports.
OO GaugeAssembly is required, all parts supplied unpainted.This is a detailed Maintenance Hoist and Frame Kit, often seen at maintenance depots and works, used for lifting parts up to 500kg in weight during maintenance of locomotives and rolling stockOO GaugeKit of parts includes:-2 - Frame Sides1 - Top Beam2 - Hoist Parts4 - Ground Support Legs1 - Hook1 - 12cm - Length of Chain
All parts supplied unpainted - assembly is required. Glue and paints are not includedThe frame sides fit into slots in the top beam, the two hoist parts are assembled around the top beam with the chain as shown in the pictures; the hoist can then slide along the beam to position as desired. Dimensions of completed kit:-Overall Height - 96mmOverall width - 50mmOverall length - 102mm
(Kit Number W40)
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - Mk1 Type B Structure Kit with Lattice Masts and a 75mm Span for up to 2 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.SET E11-11 - product code 2WH0901111PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment Portal Structure Kit - Mk1 Type B Structure Kit with Lattice Masts and a 75mm Span for up to 2 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E11-11 - product code 2WH0901111This set E11-11 includes parts to construct one (1) Mk1 Type A structure for up to 2 Tracks (2 Lattice Masts, 2 Bases and 1 Span section).
The two Pile Driven style Bases included in the kit come with magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the Mk1 Style OHLE are available to Purchase Separately as follows:-
SET E11-5 - Mk1 Registration Arms and Catenary Wire Supports for Type A & B Structures (SET E11-5) - product code 2WH0901105
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E11-11) dimensions:-
Maximum height above baseboard (including base) - 65mm
Overall length of structure (across the tracks) - 91mm
Max width of structure/base - 8mm
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type B Cantilever Lattice Mast Structure for 2-Tracks,Typical of a type fitted to the West Coast Main Line route, including Magnetic Base.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E16-15 - product code 4WH0901615Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type B Cantilever Lattice Mast Structure for up to 2-Tracks, including Magnetic Base, typical of a type fitted to the West Coast Main Line route.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-15 - product code 4WH0901615
This set E16-15 includes parts to construct One (1) detailed Type B Cantilever Structure with a Lattice Mast that has a span to cater for up to 2 (two) tracks.
One Mast Base is included in the kit, with two magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.
PLEASE NOTE - the registration arms are NOT included and should be purchased separately.
Registration Arm and Catenary Wire Supports for the Type B Structure available to Purchase Separately are as follows:-
• SET E16-6 - Two Single Registration Arms and two Catenary Wire Supports (magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] - Product code 4WH0901606
All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.
Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.
The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]
OHLE Structure kit (SET E16-15) dimensions:-
• Overall height above baseboard (including bases) - 111mm
• Overall length of structure (across the tracks) - 115mm
• Overall width of structure - 14mm
• Nominal height of contact wire (if fitted to E16-6 Magnetic Registration Arms) - 78mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pedestrian Safety Barriers OO Gauge x 8OO Gauge (unpainted)Pedestrian Safety Barriers OO Gauge Pack of 8 Sections
These fixed leg type barriers are commonly used in all public areas, roadside, in workshops or depots, and are useful for managing safety area perimeters such as around a work site or to prevent unauthorised access, keeping people safe whilst queuing or for crowd control.
Size of each Barrier approx. 30mm long x 14.4mm high.
Supplied unpainted, a light coat of primer is recommended before painting silver.
Note:- a product protection frame will need to be carefully removed first (with fine sprue cutters) before the product can be removed from the sprue.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Brake Pipes, Control Air Pipes, Multiple Working Connectors /Cables and ETH Cables for both ends of one Class 50 locomotive.Add some extra detail to your locomotives or replace missing accessory buffer beam details (please read the full Product Description).
OO Gauge (supplied unpainted)This set of brake, steam heat pipes and ETH cables is enough for both ends of one Class 50 Locomotive, the UNPAINTED pack includes:-
2 - Air Brake Pipes (BP)4 - Main Reservoir Air Pipes (MRP)4 - Control Air Pipes (CA)2 - Multiple Working Connector/Cables (MW)2 - Multiple Working Receptacles (MW)2 - ETH (Electric Train Heating) Jumper Cables (ETH)2 - ETH (Electric Train Heating) Receptacles (ETH)2 - Vacuum Hoses/Pipes with hose dummy bracket (VAC)Notes:-
There may have been variations between members of the Class 50 fleet in pipe configurations, fitting and placement; therefore it is recommended to refer to photographs of the real thing when fitting these parts.
All pipes have a 0.7mm peg that can be fitted into a drilled hole in the buffer beam, alternatively the peg can be cut-off and the pipe attached with a small amount of adhesive.
These parts are delicate and may not be suitable for use with couplings fitted, especially on tighter radius curves.
The pipes are supplied unpainted, please refer to pictures for typical colours.
Top-Tip - use a light coat of white primer first, and paint the pipes before removing them from the sprue.
A downloadable fitting guide is provided in the attachment tab above.
(SET Number 22 for Class 50)
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Slateford Carriage Siding Platform Kit (66cm) & 2 Sets Of StepsCreate Your Own Carriage Sidings With These Maintenance & Cleaning Platform Kit, This Is Modelled From Slateford Carriage Sidings Near EdinburghPack Includes:6 x Grey Platform Tops 110mm Long x 12mm Wide With White Concrete Supports
2 x Sets of Platform Steps (unpainted)
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Maintenance Hoist and Frame including, hoist, chain, hook.
N GaugeThis is a detailed Maintenance Hoist and Frame Kit, often seen at maintenance depots and works, used for lifting parts up to 500kg in weight during maintenance of locomotives and rolling stockN GaugeIncludes Hook And Tubing To Simulate Chain
All parts supplied unpaintedDimensions of completed kit:-Overall Height - 54mmOverall width - 27mmOverall length - 57mm
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Brake Pipes, Control Air Pipes, Multiple Working Connectors/Cables and ETH Cables for both ends of one Class 33 locomotive.Includes high level pipes and cables parts for a Class 33/1. Add some extra detail to your locomotives or replace missing accessory buffer beam details (please read the full Product Description).OO Gauge (supplied unpainted)This set of brake, steam heat pipes and ETH cables is enough for both ends of one Class 33 Locomotive, the UNPAINTED pack includes:-
2 - Air Brake Pipes (BP)4 - Main Reservoir Air Pipes (MRP)4 - Control Air Pipes (CA)4 - Multiple Working Receptacles for Buffer Beam (MW)2 - ETH (Electric Train Heating) Jumper Cables (ETH)2 - ETH (Electric Train Heating) Receptacles (ETH)2 - Vacuum Hoses/Pipes with hose dummy bracket (VAC)4 - High Level Brake Pipes Left / Right [for Class 33/1] - (H/L)2 - High Level Multiple Working Connector Cables [for Class 33/1] - (H/L MW)2 - High Level Multiple Working Receptacles [for Class 33/1] - (H/L MW)Also included in this set are four types of Dummy Couplings:-2 - Dummy Screw Couplings2 - Dummy Screw Couplings in the Stored Position2 - Dummy Buckeye Couplers [for Class 33/1] - Dropped2 - Dummy Buckeye Couplers [for Class 33/1] - RaisedNotes:-
There may have been variations between members of the Class 33 fleet in pipe configurations, fitting and placement; therefore it is recommended to refer to photographs of the real thing when fitting these parts.
All pipes will need to be attached with a small amount of adhesive.
These parts are delicate and may not be suitable for use with couplings fitted, especially on tighter radius curves.
The pipes are supplied unpainted, please refer to pictures for typical colours.
Top-Tip - use a light coat of white primer first, and paint the pipes before removing them from the sprue.
A downloadable fitting guide is provided in the attachment tab above.
(SET Number 24 for Class 33)
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Mk1 OHLE Type A 100mm Span Extension for fitting to Mk1 Type A, B, C and E structure kits.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-8 - product code 4WH0901608Detailed Overhead Line Equipment Mk1 OHLE 1 x Type A 100mm Span Extension for fitting to Mk1 Type A, B, C and E structure kits.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-8 - product code 4WH0901608
This set E16-8 includes parts designed specifically to fit to our Mk1 Type A, Type B, Type C and Type E OHLE kits E16-1, E16-2, E16-11 and E16-12, E16-23, E16-51 and E16-52 (not included)
This extension span is designed to be fitted during assembly of the structure kit.
The kit consists of:-
- One (1) 100mm Span Extension (Type A)
All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Mk1 OHLE Type G 2 x 100mm Span Extension for fitting to Mk1 Type G, I-Beam structure kits.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-77 - product code 4WH0901677Detailed Overhead Line Equipment Mk1 OHLE 2 x Type G 100mm Span Extension for fitting to Mk1 Type G, I-Beam structure kits.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-77 - product code 4WH0901677
This set E16-77 includes parts designed specifically to fit to our Mk1 Type G OHLE kit E16-71 (not included)
This extension spans are designed to be fitted during assembly of the structure kit.
The kit consists of:-
- Two (2) 100mm I-Beam Span Extensions (Type G)
All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type F Anchor Portal 4-Track structure,Typical of a type fitted to the West Coast Main Line route, incl. Magnetic Bases.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E16-61 - product code 4WH0901661Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type F Anchor Portal 4-Track structure, including Magnetic Bases, typical of a type fitted to the West Coast Main Line route.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-61 - product code 4WH0901661
This set E16-61 includes parts to construct One (1) detailed Type F Anchor Portal 4-Track structure with Double Frame Masts that has a span to cater for up to 4 (four) tracks.
Four Mast Bases are included in the kit, with four magnets to fit into two of the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.
PLEASE NOTE - the registration arms are NOT included and should be purchased separately.
Registration Arms and Wire Anchors for the Type F Structure available to Purchase Separately are as follows:-
• SET E16-66 - Registration Arms and Wire Anchors Set (magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] - Product code 4WH0901666
All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.
Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.
The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]
OHLE Structure kit (SET E16-61) dimensions:-
• Overall height above baseboard (including bases) - 105mm
• Overall length of structure (across the tracks) - 256mm
• Nominal Span distance between inner edge of Bases - 230mm
• Overall width of structure - 44mm
• Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Mk1 OHLE 4 x Type F Registration Arms and 8 x Wire Anchors (magnetic type) for fitting to Mk1 Type F Anchor Portal structure kits.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E16-66 - product code 4WH0901666Detailed Overhead Line Equipment Mk1 OHLE 4 x Type F Registration Arms and 8 x Wire Anchors (magnetic type) for fitting to Mk1 Type F Anchor Portal structure kits.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-66 - product code 4WH0901666
This set E16-66 includes parts designed specifically to fit to our Mk1 Type F OHLE Anchor Portal kits E16-61 and E16-62 (not included).
The Registration Arms may be fitted either way round to either side of the OHLE structure span. The Wire Anchors may be fitted to either side of the upper or lower frame of the OHLE structure span. Please refer to the pictures and the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
The kit consists of:-
- Four (4) Single Side Mount Type Registration Arms (magnetic type)
- Eight (8) Wire Anchors (magnetic type)
- Twelve (12) Magnets for fitting into the registration arms and catenary wire supports which will allow fitting of Peco type OHL wires. Note - the Peco wires are not included.
All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment - Set of 6 Return Conductor Wire Supports for Mk1 Type A or Type B Structures
Typical of the style fitted on the West Coast Main Line.SET E11-6 - product code 2WH0901106PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment - Return Conductor Wire Supports (set of 6) for Mk1 Type A or Type B Structures
Typical of the style fitted on the West Coast Main Line.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E11-6 - product code 2WH0901106
This set is specifically designed to be used with our Mk1 OHLE structure kits E11-1, E11-2, E11-11 and E11-12 (not included).This set E11-6 includes the following parts:-
- Two (2) Single Span Side Mount Return Conductor Supports
- Two (2) Double Span Side Mount Return Conductor Supports
- Two (2) Mast End Mount Return Conductor Supports
The parts are fitted to the side of the span or end of the mast of your assembled Mk1 OHLE Structure and may need to be attached with a very small spot of glue.
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - Mk1 Type A Structure Kit with 135mm Span for up to 4 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.SET E11-2 - product code 2WH0901102PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment Portal Structure Kit - Mk1 Type A Structure Kit with 135mm Span for up to 4 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E11-2 - product code 2WH0901102This set E11-2 includes parts to construct one (1) Mk1 Type A structure for up to 4 Tracks (2 Masts, 2 Bases and 1 Span section).
The two Pile Driven style Bases included in the kit come with magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the Mk1 Style OHLE are available to Purchase Separately as follows:-
SET E11-5 - Mk1 Registration Arms and Catenary Wire Supports for Type A & B Structures (SET E11-5) - product code 2WH0901105
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E11-2) dimensions:-
Maximum height above baseboard (including base) - 65mm
Overall length of structure (across the tracks) - 149mm
Max width of structure/base - 8mm
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
GRC Raised Lineside Cabinets - N Gauge (Pack Of 3)Pack of 3 Detailed CabinetsIncludes:2 Raised Platforms With Double Door Lineside Cabinet1 Raised Platform With Single Door Lineside Cabinet
10mm x 10mm x 19mm tall
Supplied Unpainted, Paint To Suit
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of one 20ft Refuse Compaction ContainerThese 20ft Refuse Compaction Containers (often referred to as Binliner containers) are used for Waste transfer from major cities to landfill, and often seen on container flat wagons such as FGAs. Over 200 of this particular type were built in Sheffield and could often be seen operating on the Midland Main Line between Hendon and Bedford from the late 1970s.
This pack is for one (1) waste container, supplied unpainted. Also included in the pack is a set of pre-cut vinyl EASIDISPOSE lettering.
The original colour of the containers was yellow, however in latter years of operation they were painted dark green.
A multi-pack of 3 containers is also available see product 4WH0802802.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Maintenance Hoist and Frame including, hoist, chain, hook.
TT:120 ScaleAssembly is required, all parts supplied unpainted.This is a detailed Maintenance Hoist and Frame Kit, often seen at maintenance depots and works, used for lifting parts up to 500kg in weight during maintenance of locomotives and rolling stockTT:120 ScaleIncludes Hook And Tubing To Simulate Chain
All parts supplied unpaintedDimensions of completed kit:-Overall Height - 54mmOverall width - 27mmOverall length - 57mm
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Hunt Couplings ELITE - Close Coupling - Couplings for Lima MK3 / HST Coaches to replace the Moulded Type Tension Lock Couplings - OO GaugePlease check the pictures carefully to ensure you are selecting the correct type of coupling for your coaches, if in doubt, please get in touch.NOTE - fitting these couplings requires you to the cut off the original couplings from your model and gluing the Hunt Coupling in place.Please refer to the attachment tab above for the downloadable Fitting Guide for Hunt CouplingsThese Close couplings are suitable for running on Radius 3 curves or greater (when fitted as shown in the pictures)Pack MC9b
Hunt ELITE Couplings:
Since our launch of products back earlier this year many of you requested the option to be able to couple up your Locomotives/Carriages & Wagons, without concern for Polarity of Couplings, we wanted to ensure the product we developed would be of minimal size, strong enough & reliable.
With our new ELITE couplings you can never worry about polarity & formations never again, much work went into the Magnet Technology in these new couplings to allow the work of dual polarity's in one single compact coupling.
This is for 10 Pairs of Close Couplings To Replace Moulded Type Tension Lock couplings as pictured.
Great For Lima Mk3 and Lima HST Coaches with moulded type bogie mounted couplings.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Test Car 1 ADW150375 Booklet by Dave Bower
22 page A5 Booklet
NEW Test Car 1 Booklet by Dave BowerTest Car 1 – ADW150375 was used for over 30 years by British Rail based out of the RTC at Derby. Thankfully this unique coach is now in preservation at the South Devon Railway.
This 22 page booklet provides an insight into how this coach was modified for its role as a Test Car, and gives a detailed account of the ride & stability testing process for which the Test Car was mainly used by British Rail.
Paperback Booklet - A5 (21.0 cm x 14.8 cm)
22 pages with over twenty photographs and diagrams (mostly colour).
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Caddy-Mate4
Storage caddy for your controller handset, keep it easy to hand.
For one Digitrax DT602 controller handset.One Caddy-Mate4 suitable for the Digitrax DT602 type controller handset.
(alternative Caddy-Mate5 is available for the Digitrax UT6 controller)
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - Mk1 Type A Structure Kit with 75mm Span for up to 2 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.SET E11-1 - product code 2WH0901101PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment Portal Structure Kit - Mk1 Type A Structure Kit with 75mm Span for up to 2 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E11-1 - product code 2WH0901101This set E11-1 includes parts to construct one (1) Mk1 Type A structure for up to 2 Tracks (2 Masts, 2 Bases and 1 Span section).
The two Pile Driven style Bases included in the kit come with magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the Mk1 Style OHLE are available to Purchase Separately as follows:-
SET E11-5 - Mk1 Registration Arms and Catenary Wire Supports for Type A & B Structures (SET E11-5) - product code 2WH0901105
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E11-1) dimensions:-
Maximum height above baseboard (including base) - 65mm
Overall length of structure (across the tracks) - 91mm
Max width of structure/base - 8mm
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of three (3) 20ft Refuse Compaction ContainersThese 20ft Refuse Compaction Containers (often referred to as Binliner containers) are used for Waste transfer from major cities to landfill, and often seen on container flat wagons such as FGAs. Over 200 of this particular type were built in Sheffield and could often be seen operating on the Midland Main Line between Hendon and Bedford from the late 1970s.
This pack is for three (3) waste containers, supplied unpainted. Also included in the pack is a set of pre-cut vinyl EASIDISPOSE lettering.
The original colour of the containers was yellow, however in latter years of operation they were painted dark green.
Also available in a pack of one, see product 4WH0802801.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
This is a detailed static model of a Class 37 Locomotive Bogie.OO GaugeA detailed static Class 37 Bogie (one)Class 37 locomotives are fitted with 3 axle bogies of 13ft 6in wheelbase, with two stage suspension, three EE538 traction motors and integral air braking equipment.This detailed static model of a Class 37 locomotive bogie represents the cast frame type and is intended to be used in depot/workshop or scrapyard scenes on your layout.OO GaugePack includes:- one Class 37 bogie, supplied unpainted. A light coat of primer is recommended before painting as desired to suit your layout.
Back In Stock Soon
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
This is a detailed static model of a Class 37 Locomotive Bogie.O GaugeA detailed static Class 37 Bogie (one)Class 37 locomotives are fitted with 3 axle bogies of 13ft 6in wheelbase, with two stage suspension, three EE538 traction motors and integral air braking equipment.This detailed static model of a Class 37 locomotive bogie represents the cast frame type and is intended to be used in depot/workshop or scrapyard scenes on your layout.O GaugePack includes:- one Class 37 bogie, supplied unpainted. A light coat of primer is recommended before painting as desired to suit your layout.
The bogie is approximately 133mm overall length.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Hunt Couplings ELITE - Intermediate Coupling - Couplings for Lima MK3 / HST Coaches to replace the Moulded Type Tension Lock Couplings - OO GaugePlease check the pictures carefully to ensure you are selecting the correct type of coupling for your coaches, if in doubt, please get in touch.NOTE - fitting these couplings requires you to the cut off the original couplings from your model and gluing the Hunt Coupling in place.Please refer to the attachment tab above for the downloadable Fitting Guide for Hunt CouplingsThese Intermediate couplings are suitable for running on Radius 2 curves or greater (when fitted as shown in the pictures)Pack MC10b
Hunt ELITE Couplings:
Since our launch of products back earlier this year many of you requested the option to be able to couple up your Locomotives/Carriages & Wagons, without concern for Polarity of Couplings, we wanted to ensure the product we developed would be of minimal size, strong enough & reliable.
With our new ELITE couplings you can never worry about polarity & formations never again, much work went into the Magnet Technology in these new couplings to allow the work of dual polarity's in one single compact coupling.
This is for 10 Pairs of Intermediate Couplings To Replace Moulded Type Tension Lock couplings as pictured.
Great For Lima Mk3 and Lima HST Coaches with moulded type bogie mounted couplings.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Hunt Magnetic Couplings ELITE Pack For Lion or Tiger No.58, and L&MR Wagons (5 Pairs)Pack Includes:1 Pivoting Magnetic Coupling For a Hornby Lion or Tiger No.58 Locomotive5 Pairs Of Pivoting Magnetic Couplings To Fit L&MR Wagons
These Pivoting Coupling Allow Better Flexibility for the lightweight wagons to fit the Lion / Tiger No.58 Locomotive, and L&MR Wagons (5 Pairs)
Since our launch of products back earlier this year many of you requested the option to be able to couple up your Locomotives/Carriages & Wagons, without concern for Polarity of Couplings, we wanted to ensure the product we developed would be of minimal size, strong enough & reliable.With our new ELITE couplings you can never worry about polarity & formations never again, much work went into the Magnet Technology in these new couplings to allow the work of dual polarity's in one single compact coupling.
This is our new in house designed and produced magnetic coupling system, making coupling your locomotives, carriages & wagons much easier.
For customers using our existing Original Hunt Couplings these will still be available and we will continue to produce & stock new additions will be coming to both ranges, we have provided constant new products to our range and much more to come!
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Hunt Magnetic Couplings ELITE Pack For L&MR Wagons (5 Pairs) such as the wagons supplied with Hornby Tiger No.58Pack Includes:5 Pairs Of Pivoting Magnetic Couplings To Fit L&MR WagonsPlease see our other couplings packs if you need the L&MR locomotive couplings - product 4WH0300690
These Pivoting Coupling Allow Better Flexibility for the lightweight coaches & wagons to fit the L&MR Wagons (5 Pairs)
Since our launch of products back earlier this year many of you requested the option to be able to couple up your Locomotives/Carriages & Wagons, without concern for Polarity of Couplings, we wanted to ensure the product we developed would be of minimal size, strong enough & reliable.With our new ELITE couplings you can never worry about polarity & formations never again, much work went into the Magnet Technology in these new couplings to allow the work of dual polarity's in one single compact coupling.
This is our new in house designed and produced magnetic coupling system, making coupling your locomotives, carriages & wagons much easier.
For customers using our existing Original Hunt Couplings these will still be available and we will continue to produce & stock new additions will be coming to both ranges, we have provided constant new products to our range and much more to come!
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Platform Newspaper Stands and Papers. HO Scale (1:87) Pack of 2 stands with 4 stacks of newspapersPlatform Newspaper Stands and PapersHO Scale (1:87)Add that extra little detail to your platforms, with the Daily Newspaper Dispenser ShelvesDetailed Stacked Papers Pack of 2 stands includes 2 Stands & 4 Stacks of NewspapersThese are supplied Unpainted, Paint To Your Desired Colours
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Supporting the Quorn Wagon and Wagon group at the Great Central Railway
"POCKET STOCKBOOK" - 2025 edition
Pictures and details of the superb collection of rolling stock preserved by the Quorn based volunteer group at the GCR.Visit the Quorn Wagon Group here - www.quornwagonandwagon.co.ukSupporting the Quorn Wagon and Wagon group at the Great Central Railway
"POCKET STOCKBOOK"
This 122-page booklet provides pictures and details of the groups' rolling stock fleet including box vans, open wagons, hoppers, tanks and departmental vehicles, as well as period road vehicles.
The Quorn Wagon and Wagon group appreciate your support towards restoring and maintaining this ageing collection in operational condition, for the enjoyment of visitors to the Great Central Railway. All profits from purchases of this booklet go towards helping Quorn Wagon and Wagon restoring and maintaining the fleet.
Softback A6 size (105 x 148mm), with clear acetate cover front and back, ring-bound booklet for easy reference.
122 pages - colour photographs throughout.Complied 2025
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Easy To Assemble Laser Cut Steel Storage Rack, Ideal Add On For Any Depot or Maintenance Yard, This Was Drawn up And Modelled From The Examples At Scunthorpe Steel Works, Thanks To The Appleby and Frodingham RailwayLength 55mm, Width 30mm, Height 38mm
1 Rack Included Per Pack, Loads Not Included
Spray/Paint In Your Chosen Desired Colours After AssemblyOO Gauge
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Mk1 OHLE Type F 100mm Span Extension for fitting to Mk1 Type F Anchor Portal structure kits.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-67 - product code 4WH0901667Detailed Overhead Line Equipment Mk1 OHLE 1 x Type F 100mm Span Extension for fitting to Mk1 Type F Anchor Portal structure kits.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-67 - product code 4WH0901667
This set E16-67 includes parts designed specifically to fit to our Mk1 Type F OHLE kits E16-61 and E16-62 (not included)
This extension span is designed to be fitted during assembly of the structure kit.
The kit consists of:-
- One (1) 100mm Span Extension (Type F)
All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of 2 Trolleys with Small Cable Drums for your Workshop or DepotOO GaugePack of 2 Trolleys with Small Cable DrumsOO GaugePack includes:-2 - Small Cable Drum Trolleys each with three cable drums wound with varying amounts of Cable.Unpainted, ready to paint to suit your depot or workshop scene
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of 10 Empty Cable Drums for your Workshop or DepotOO GaugePack of 10 Empty Cable DrumsOO GaugeUnpainted, ready to paint to suit your depot or workshop scene
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
HO Scale (1:87)Detailed Armco Crash Barrier Set - HO Scale (1:87)Detail Your Roadsides, Depot's, Town Scenes, Roads & Much More With This Pack Of Detailed Roadside Armco Crash Barriers.
Key Features:Flexable To Allow For Curves Etc.Selection Of Ends And Wall Crash Barriers.Link Together By Overlapping Like Real Barriers.
These Are Provided Unpainted In Grey, Ideal To Easily Paint Silver/Yellow.Pack Contains:Barrier Height - 7.85mmTotal Length - 101cm6 x 96.5mm Flexible Straight Lengths2 x 76.5mm Crash Barrier Ends2 x 78mm Sloped Crash Barrier Ends2 x 35mm Wall Protector Barriers2 x 26mm Wall Protector Barriers
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of 10 detailed Oil BarrelsHO Scale (1:87)Detailed Oil Barrels (10)HO Scale (1:87)Pack of 10 Barrels includes:-3 Dented Oil Barrels2 Ribbed Oil Barrels4 Standard Oil Barrels1 Oil Barrel with PumpUnpainted, ready to paint to suit your depot or workshop scene
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of 20 (twenty) Gas Bottles- 10 larger size- 10 smallHO Scale (1:87)Pack of 20 (twenty) Gas Bottles- 10 larger size- 10 smallHO Scale (1:87)Supplied Unpainted, ready to paint to suit your depot or workshop scene
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pallets Loaded with Detailed AxleboxesHO Scale (1:87)Pack of 6Pack of 6 Pallets loaded with Detailed AxleboxesHO Scale (1:87)Three types of axleboxes are represented, 2 of each in a pack, Unpainted- Locomotive axleboxes- Y25 Bogie type Wagon axleboxes- Coaching Stock axleboxes
