Series 1 Twin Track Catenary OO Gauge (Set E2)

Detailed Overhead Line Equipment Mast Structure Kit - SERIES 1 Twin Track Cantilever type with 95mm Arm, including Magnetic BaseOO GaugeSET E2-1 - product code 4WH0900201PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 Twin Track Cantilever type with 95mm Arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-1 - product code 4WH0900201This set E2-1 includes parts to construct One (1) basic SERIES 1 Twin Track Cantilever Mast structure. One Pile Driven style Base is included in the kit, with two magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.Registration Arm options for the SERIES 1 Twin Track Cantilever type OHLE are available to Purchase Separately as follows:- SET E2-9 Left Hand Registration Arm (Series 1) SET E2-10 Right Hand Registration Arm (Series 1) SET E2-11 Combined Left & Right Hand Registration Arms (Series 1) SET E2-12 Left Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E2-13 Right Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E2-14 Combined Left & Right Hand Registration Arms (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer. Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]OHLE Structure kit (SET E2-1) dimensions:- Maximum height above baseboard (including base) - 121mm Overall length of structure (across the tracks) - 96mm Max width of structure - 11.6mm Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment Mast Structure Kit - SERIES 1 Twin Track Cantilever type with 115mm Arm, including Magnetic BaseOO GaugeSET E2-2 - product code 4WH0900202PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 Twin Track Cantilever type with 115mm Arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-2 - product code 4WH0900202This set E2-2 includes parts to construct One (1) basic SERIES 1 Twin Track Cantilever Mast structure. One Pile Driven style Base is included in the kit, with two magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately. Registration Arm options for the SERIES 1 Twin Track Cantilever type OHLE are available to Purchase Separately as follows:- SET E2-9 Left Hand Registration Arm (Series 1) SET E2-10 Right Hand Registration Arm (Series 1) SET E2-11 Combined Left & Right Hand Registration Arms (Series 1) SET E2-12 Left Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E2-13 Right Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E2-14 Combined Left & Right Hand Registration Arms (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit] OHLE Structure kit (SET E2-2) dimensions:- Maximum height above baseboard (including base) - 121mm Overall length of structure (across the tracks) - 115mm Max width of structure - 11.6mm Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment Mast Structure Kit - SERIES 1 Twin Track Cantilever type for Platform mounting with 115mm Arm, including Magnetic BaseOO GaugeSET E2-5 - product code 4WH0900205PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 Twin Track Cantilever type for Platform mounting with 115mm Arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-5 - product code 4WH0900205This set E2-5 includes parts to construct One (1) basic SERIES 1 Twin Track Cantilever Mast structure that is intended for mounting at Platform level. One Concrete style Base is included in the kit, with magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.Registration Arm options for the SERIES 1 Twin Track Cantilever type OHLE are available to Purchase Separately as follows:- SET E2-9 Left Hand Registration Arm (Series 1) SET E2-10 Right Hand Registration Arm (Series 1) SET E2-11 Combined Left & Right Hand Registration Arms (Series 1) SET E2-12 Left Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E2-13 Right Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E2-14 Combined Left & Right Hand Registration Arms (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit] OHLE Structure kit (SET E2-5) dimensions:- Maximum height above platform (including base) - 104mm Overall length of structure (across the tracks) - 115mm Max width of structure - 11.6mm Nominal height of contact wire with Mast fitted onto an 18mm high platform (if wire fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Magnetic Pile Driven style base kit for Overhead Line Equipment Structures - SERIES 1 Twin Track Cantilever typeOO GaugeSET E2-6 - product code 4WH0900206Kit included  1 BASE, 2 SPACERS and 2 MAGNETS - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWMagnetic Pile Driven style base kit for Overhead Line Equipment Structures - SERIES 1 Twin Track Cantilever typeBASE with MAGNETS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-6 - product code 4WH0900206This set E2-6 includes 1 Pile Driven style Base, 2 Spacers and 2 Magnets. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - these bases are suitable for mounting the Overhead Line Equipment Structures of the SERIES 1 Twin Track Cantilever type (SETs E2-1 to E2-5). All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.

Read more less

Post Mounted Tensioners and Conductor Wire Holder for Overhead Line Equipment Structures - SERIES 1 Twin Track Cantilever typeOO GaugeSET E2-7 - product code 4WH0900207Post Mounted Tensioners only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWPost Mounted Tensioners and Conductor Wire Holder for Overhead Line Equipment Structures - SERIES 1 Twin Track Cantilever typePost Mounted Tensioners only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-7 - product code 4WH0900207This set E2-7 includes Two (2) Post Mounted wire Tensioners and Conductor Wire Holder (non-working). PLEASE NOTE - these parts are suitable for mounting to the Overhead Line Equipment Structures of the SERIES 1 Twin Track Cantilever type (SETs E2-1 to E2-5). All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.

Read more less

Detailed Overhead Line Equipment 2 x Registration Arms LEFT HAND for SERIES 1 Twin Track Cantilever type OHLEOO Gauge SET E2-9 - product code 4WH0900209REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment 2 x Registration Arms LEFT HAND for SERIES 1 Twin Track Cantilever type OHLEPLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-9 - product code 4WH0900209 This set E2-9 includes TWO (2) Left Handed Registration Arms that are intended for fitting to the SERIES 1 Twin Track Cantilever kits (SETs E2-1 to E2-5).PLEASE NOTE that these registration arms are NOT intended to support the fitting of contact wires. Other types of registration arms for the SERIES 1 Twin Track Cantilever OHLE are available as follows:- SET E2-10 Right Hand Registration Arm (Series 1) SET E2-11 Combined Left & Right Hand Registration Arms (Series 1) SET E2-12 Left Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E2-13 Right Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E2-14 Combined Left & Right Hand Registration Arms (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.

Read more less

Detailed Overhead Line Equipment 2 x Registration Arms RIGHT HAND for SERIES 1 Twin Track Cantilever type OHLEOO Gauge SET E2-10 - product code 4WH0900210REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment 2 x Registration Arms RIGHT HAND for SERIES 1 Twin Track Cantilever type OHLEPLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-10 - product code 4WH0900210 This set E2-10 includes TWO (2) Right Handed Registration Arms that are intended for fitting to the SERIES 1 Twin Track Cantilever kits (SETs E2-1 to E2-5).PLEASE NOTE that these registration arms are NOT intended to support the fitting of contact wires. Other types of registration arms for the SERIES 1 Twin Track Cantilever OHLE are available as follows:- SET E2-9 Left Hand Registration Arm (Series 1) SET E2-11 Combined Left & Right Hand Registration Arms (Series 1) SET E2-12 Left Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E2-13 Right Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E2-14 Combined Left & Right Hand Registration Arms (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.

Read more less

Detailed Overhead Line Equipment 2 x MAGNETIC Registration Arms kit LEFT HAND for fitting to the SERIES 1 Twin Track Cantilever OHLEOO Gauge SET E2-12 - product code 4WH0900212Pack of 2 MAGNETIC Registration Arms that can support the fitting of contact wires (not included)REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment - 2 MAGNETIC Registration Arms LEFT HAND for fitting to the SERIES 1 Twin Track Cantilever OHLEREGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-12 - product code 4WH0900212 This set E2-12 includes TWO (2) MAGNETIC Type Left Handed Registration Arms that are intended for fitting to the SERIES 1 Twin Track Cantilever kits (SETs E2-1 to E2-5)PLEASE NOTE that this registration arm kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included. PLEASE NOTE the Magnets will need to be fitted into the registration arms Other types of registration arms are available as follows:- SET E2-9 Left Hand Registration Arm (Series 1) SET E2-10 Right Hand Registration Arm (Series 1) SET E2-11 Combined Left & Right Hand Registration Arms (Series 1) SET E2-13 Right Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E2-14 Combined Left & Right Hand Registration Arms (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.

Read more less

Detailed Overhead Line Equipment 2 x MAGNETIC Registration Arms kit RIGHT HAND for fitting to the SERIES 1 Twin Track Cantilever OHLEOO Gauge SET E2-13 - product code 4WH0900213Pack of 2 MAGNETIC Registration Arms that can support the fitting of contact wires (not included)REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment - 2 MAGNETIC Registration Arms RIGHT HAND for fitting to the SERIES 1 Twin Track Cantilever OHLEREGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-13 - product code 4WH0900213 This set E2-13 includes TWO (2) MAGNETIC Type Right Handed Registration Arms that are intended for fitting to the SERIES 1 Twin Track Cantilever kits (SETs E2-1 to E2-5)PLEASE NOTE that this registration arm kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included. PLEASE NOTE the Magnets will need to be fitted into the registration arms Other types of registration arms are available as follows:- SET E2-9 Left Hand Registration Arm (Series 1) SET E2-10 Right Hand Registration Arm (Series 1) SET E2-11 Combined Left & Right Hand Registration Arms (Series 1) SET E2-12 Left Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E2-14 Combined Left & Right Hand Registration Arms (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.

Read more less