Lineside (N)

Key Clamp Safety Railing Used Around Depots, Yards, Workshops And Much More...Pack of 6 Lengths - 68mm Each (408mm Total)N GaugeAvailable Pre-Coloured In Safety Yellow/Silver Durable Plastic Material, Easily Glued 1mm Drill Holes Recommended Or Affix With GluePlease select colour from the menu

Read more less

Palisade Fencing - Straight 3-Panel Sections x 8 pieces plus 2 Gates (total 53cm in length)N GaugePalisade Fencing - Pack includes:- - 8 pieces of Straight 3-Panel Sections (each section = 6cm)- 1 Large Gate- 1 Small Gate Total 53cm in lengthThe Palisade Fencing is approx. 1.5cm high above the baseboard, and has 0.75mm diameter locating pegs at the bottom for inserting into baseboard holes.N GaugeSupplied unpainted

Read more less

Handy Track Laying Accessory for N Gauge to help fitting Rail Joiners to Code 55 and Code 80 Rail Joiners.This N Gauge 'Rail Joiner Mate' is designed to help when laying trackwork.Insert your rail joiner into the slot in the end of the Rail Joiner Mate and slide into place. Pack includes 2 x Rail Joiner Mate Accessories in Orange.Handy Track Laying Accessory for N Gauge to help fitting Rail Joiners to Code 55 and Code 80 Rail.

Read more less

Concrete Cable Trough Trunking is an integral component of modern railway infrastructure, contributing to the efficiency, safety, and reliability of train operations by providing a robust and organized solution for cable management and distribution.Concrete Cable Trough Trunking Pack (N Gauge)Pack Contains:12 x Lengths (56mm) With Aligned Trough Lids4 x 3 Way Junctions4 x 45° Angle Sections (2 Left, 2 Right)4 x 90° Angle Sections (2 Left, 2 Right)4 x 90° Large Angle Sections (2 Left, 2 Right)2 x Open Trough Sections With Wire1 x Raised Cable Trough Section About Concrete Cable Trough Trunking:Railway concrete trough trunking is utilized extensively throughout the network for various purposes: Cable Management: One primary use is for organizing and protecting cables that run alongside or underneath railway tracks. The trough trunking provides a secure pathway for cables, preventing damage from environmental factors and ensuring efficient cable management. Electrical Distribution: It serves as a conduit for electrical wires, allowing for the safe and reliable distribution of power to various railway components such as signals, lighting systems, communication devices, and other infrastructure along the tracks. Safety Enhancement: Concrete trough trunking enhances safety by minimizing the risk of cable exposure, which could otherwise pose hazards to railway personnel, passengers, and maintenance workers. By securely enclosing the cables, it reduces the likelihood of accidental contact or tripping. Durability and Longevity: Concrete trough trunking is known for its durability and ability to withstand heavy loads, extreme weather conditions, and wear and tear over time. This ensures the longevity of the railway infrastructure, minimizing the need for frequent repairs or replacements. Maintenance Access: While providing robust protection for cables, the trunking also allows for relatively easy access during maintenance and repair operations. Removable lids or access points facilitate inspection, troubleshooting, and necessary adjustments without disrupting railway operations extensively. Integration with Signalling Systems: Railway concrete trough trunking plays a crucial role in supporting signalling systems along the tracks. It accommodates cables necessary for transmitting signals that control train movements, ensuring smooth and safe operations throughout the network. Supplied In Grey Paint If Desired To Choice Of Concrete Colour

Read more less

Add some detail to your trackwork with these point machines.  Pack of 6 including 3 for LH and 3 for RH points.Suitable for Peco Streamline N Gauge Code 55 points.On the real railway signallers operate points remotely, this requires a point machine which incorporates an electric motor and blade position detection relays that confirm the position of each point blade back to the signaller.These N Gauge models of typical point machines a designed to suit Peco Streamline points (Code 55)Pack of 6 (six) point machines-- 3 which are suitable for Left Handed points- 3 which are suitable for Right Handed pointsSupplied unpainted; a light coat of primer is recommended before painting / weathering to suit your lineside.  These point machines are STATIC / DUMMY models they do not operate the points !

Read more less

AWS - Automatic Warning System magnets.N Gauge.Pack of 10.Suitable for Code 55 Track.Pack of 10 AWS MagnetsN GaugeSuitable For Code 55 TrackAWS - Automatic Warning System magnetsIntroduced during the 1950s by British Rail to provide a train driver with an audible warning and visual reminder that they are approaching signals at caution, reduction in permissible speeds, and temporary or emergency speed restrictions.Magnets are placed in the 4-foot between the running rails attached to the sleepers, on the approach to signals or speed restrictions.Set of 10 Magnets:-- 4-Standard,- 2-Bidirectional,- 2-depot test magnets,- 2-temporary warning magnets

Read more less

Key Clamp Safety Railing used Around Depots, Yards, Workshops And Much More...N Gauge. Pack of 4 end pieces. Pack of 4 Ends Pieces With Curved Barrier - 24mm Wide EachAvailable Pre-Coloured In Safety Yellow/Silver Durable Plastic Material, Easily Glued 1mm Drill Holes Recommended Or Affix With GluePlease select colour from the menu above

Read more less

Slateford Carriage Siding Platform Kit (66cm) & 2 Sets Of StepsCreate Your Own Carriage Sidings With These Maintenance & Cleaning Platform Kit, This Is Modelled From Slateford Carriage Sidings Near EdinburghPack Includes:6 x Grey Platform Tops 110mm Long x 12mm Wide With White Concrete Supports 2 x Sets of Platform Steps (unpainted)

Read more less

Depot Point Levers.N Gauge.(Pack of 5) Pack of 5 Depot Point Levers.N Gauge.Note these are scenic items, non-working.Great Addition for any Depot/Lineside.Paint to Desired Colours.

Read more less

Bridge Girder SupportsN GaugePack of 2Bridge Girder SupportsBridges for 2 tracks or more would of often had centre supports that were visible above the track bed, seen throughout England, Scotland and Wales on bridges passing over roads, footpaths and other railway lines; why not make your steel girder bridge more realistic.N GaugePack of 2Approximate Length 51mm

Read more less

Engineers Trolleys with Detailed Loads. N Gauge. Pack of 6. Pack of 6 Engineers Trolleys (static) with Detailed Loads:N GaugeTrolley 1 - Gas Bottles & ToolboxTrolley 2 - Generator, Toolboxes & Oil/FuelTrolley 3 - Rail Sections & FishplatesTrolley 4 - Lift Hoist Fitted & ChocksTrolley 5 - EmptyTrolley 6 - Cement Mixer, Shovels & ChocksSupplied Unpainted

Read more less

OO/HO Gauge Track Spacer TemplatesPack Includes:  2 x 27mm/35mm Track Centre Spacers Works With 9mm N Gauge Track with Code 55, and Code 80 Rail Protective Film On Product Will Need To Be Removed Before UseAdditional Curved Track and Straight Track Guide Templates are available separately.

Read more less

N Track Guide Templates - Straight SetPack Includes:  2 x 180mm Straight Sections 2 x 27mm/35mm Track Centre Spacers Works With 9mm N Gauge Track with Code 55 and Code 80 Rail Protective Film On Product Will Need To Be Removed Before Use Additional Track Centre Spacers and Curved Set Templates are available separately.

Read more less

Wooden Fencing - Brown. N Gauge. 6 lengths, 540mm total length.Wooden Fencing - BrownN Gauge Includes 6 lengths, 90 mm each - 540mm total lengthMade From Durable Brown Plastic, Can Be Cut To LengthCan also be painted

Read more less

Lineside Electrical Cabinets. N Gauge. Pack of 10.Lineside Electrical CabinetsN GaugeDetailed Locks & VentilationPack of 10 Consisting of:-- 2 Triple Cabinet- 4 Dual Cabinets- 4 Single CabinetsUnpainted, ready for painting to suit your lineside installation.Enamel paints are recommended.

Read more less

BR Disc Type Ground Signals.N Gauge.Pack of 6 with Disc Face Sticker Sheet.Ground Signals BR Type Disc (Pack of 6 Disc Type Ground Signals) With Sticker SheetN GaugeIncludes Sticker Sheet As PicturedComes Unpainted, Simply Paint In Black and the Rear Weight Disc in White

Read more less

GRC Raised Lineside Cabinets - N Gauge (Pack Of 3)Pack of 3 Detailed CabinetsIncludes:2 Raised Platforms With Double Door Lineside Cabinet1 Raised Platform With Single Door Lineside Cabinet 10mm x 10mm x 19mm tall Supplied Unpainted, Paint To Suit

Read more less

N Gauge Track Guide Templates - Standard Large SetPack Includes 10 Curved Track Setting Guide Templates 1st Radius Curve: 229mm 2nd Radius Curve: 265mm 3rd Radius Curve: 300mm 4th Radius Curve: 330mm 15" Radius Curve: 381mm 18" Radius Curve: 457mm 21" Radius Curve: 533mm 24" Radius Curve: 610mm 30" Radius Curve: 762mm 36" Radius Curve: 914mm Pack Also Includes:  180mm Straight Section 27mm / 35mm Track Centre Spacer Works With 9mm N Gauge Track, Code 55 and Code 80 Rail Protective Film On Product Will Need To Be Removed Before UseAdditional Track Centre Spacers and Straight Templates are available separately.

Read more less

Mile posts - British Rail (BR) style. N Gauge. Pack of 8.Mile posts - British Rail (BR) style - Pack of 8 mileposts.Two-sets of mile posts (2 x 4 mile posts), each set covers a '1-mile' section of linesideN GaugeYou may like to pick-out the numbering on each mile post in black     **** TOP - TIP, use a Ball-Point GEL pen to pick out the raised numbers on Mileposts and Gradient sign posts **** (see picture)Mile marker posts were introduced to in the UK from 1845 in the form of posts at quarter-mile intervals along the line-side. These are primarily as reference points that can be used to specify a position on the infrastructure, for example when reporting an incident or in connection with engineering work.For over a century most mile posts were mostly painted white with black numbers, however from 1963 mile posts were generally painted yellow.In this set the mile post numbers represent the following:-7, 7¼, 7½, 7¾, 8, 8¼, 8½, 8¾ Please note these items are supplied unpainted, a light coat of primer is recommended first before painting to suit your layout.

Read more less

Lineside Lamps Huts, corrugated metal type and wooden smaller type. N GaugePack of 4, including 2 of each type of hut.Lineside Lamp Huts, seen all over the railway network; often in yards, depots or carriage sidings where there was a need to prepare and re-fill oil type lamps ready to be used on departing trains.Pack of 4 huts-- 2 larger metal type- 2 smaller wooden styleSupplied unpainted, a coat of primer is recommended before painting to suit your layout.

Read more less

TPWS (Train Protection Warning System) Grids.N Gauge.Pack of 12.Suitable for Peco Code 55 TrackTPWS (Train Protection Warning System)N GaugeSuitable for Peco Code 55 TrackPack of 12 GridsTPWS (Train Protection Warning System) is a train protection system used throughout the British passenger main-line railway network.The purpose of TPWS is to stop a train by automatically initiating a brake demand, where TPWS track equipment is fitted, if the train has:- passed a signal at danger without authority- approached a signal at danger too fast- approached a reduction in permissible speed too fast- approached buffer stops too fast.Track mounted transmitter 'grids' are secured to sleepers on the approach to the signal that applies the brakes on trains going too quickly to stop at the signal. Grids are also installed adjacent to a signal, and activated when the signal is at danger.Pack of 12 Grids:-- 5 Single Grids- 5 Double Grids- 2-Speed Control Grids

Read more less

GRC Cable Trunking Raised Straight sections. N Gauge. Pack of 4.GRC Cable Trunking parts4 Raised Straight sectionsThese cable trunking parts are designed to be used with our other GRC Cable Trunking ground level straight, raise/lower and angle sections.Unpainted, ready to paint to suit your lineside scene.Enamel paints are recommended.

Read more less

GRC Cable Trunking Raise/Lower sections. N Gauge. 1 Pair (LH/RH).GRC Cable Trunking parts1 Pair of Raise/Lower sections of trunking, 1 LH and 1 RH.N GaugeThese cable trunking parts are designed to be used with our other GRC Cable Trunking ground level straight, angle and raised sections.Unpainted, ready to paint to suit your lineside scene.Enamel paints are recommended.

Read more less

BR Mainline Style Speed Restriction Signs.N Gauge.35 speed signs - 10, 25, 30, 40, 50, 70, 75, 100, 110 and 125 mile/h.BR Mainline Style Speed Restriction SignsN GaugeA bumper pack of 35 speed signs10, 25, 30, 40, 50, 70, 75, 100, 110 and 125 mile/hSome of the lower speeds have junction direction arrows fittedThese can be easily mounted into a drilled 0.5mm hole in your baseboardSupplied in white, paint to suit your layout.

Read more less

Portable Modular Building - Pack of 1 in N Gauge Supplied unpaintedPortable Modular Building - Pack of 1 N Gauge Building size (approx.) - 42mm x 22mm x 16mm Supplied unpainted, on a sprue Glazing is not supplied, however access from underneath is provided to allow some small squares of clear plastic to be fitted behind the window apertures if desired.

Read more less

Tunnel Portal for Double Track with Side Retaining Walls. Stone TypeN GaugeTunnel Portal kit for Double Track with Side Retaining Walls. Stone TypeN GaugePack includes 4 parts- 1 x Tunnel Portal- 1 x Tunnel Portal top capping stones strip- 1 x Right Hand side Retaining Wall- 1 x Left Hand side Retaining WallPlastic, Supplied Unpainted

Read more less

GRC Cable Trunking Ground Level Straight sections. N Gauge. Pack of 4.GRC Cable Trunking parts4 Ground Level Straight sections.These cable trunking parts are designed to be used with our other GRC Cable Trunking raised straight, raise/lower and angle sections.Unpainted, ready to paint to suit your lineside scene.Enamel paints are recommended.

Read more less

Add a bit of detail to your lineside with Gradient sign posts.Supplied in a packs of 8 sign posts with a variety of gradients.N GaugeGradient sign postsSupplied in a packs of 8 sign posts with a variety of gradients N GaugeThe numbering on each post is slightly raised to allow it to be picked-out in black on each sign post.Gradients on the railway are rarely constant over any considerable length, and may change several times within the space of a mile.Gradient signs were first used around 1850 with a sign placed at each location where the gradient of the line changes. Most gradient sign posts located on the lineside have two arms facing the track, one on either side of a post. The arms slant up or down to indicate the direction of the gradient, and have the gradient marked on them.The gradient is expressed as a ratio, e.g. "1 in 200" (or "1:200")that means that the track rises (or drops) one unit for every 200 units travelled horizontally.1 in 200 is therefore a steeper gradient than 1 in 500.Some designs of gradient sign post do not show the first part of the ratio so 1 in 200 is shown merely as “200”.In general gradient sign posts are painted white with black lettering, however from the 1970s onwards some are painted yellow.

Read more less

Pack of 2 Lineside Loading GaugesN GaugeRailway Loading Gauges are used to ensure that the clearance between the top of a railway vehicle including its load, and any overhead structures, such as bridges, tunnels, or power lines, is sufficient to prevent collisions or damage to the vehicle, its load or the infrastructure.Loading Gauges are commonly used in railway yards, maintenance and loading facilities. Pack of 2 - N GaugeEach Loading Gauge is a 2 part kit, simply de-sprue and slot the post into the base. Supplied unpainted

Read more less

Tunnel Portal for Single Track with Side Retaining Walls. Stone TypeN GaugeTunnel Portal kit for Single Track with Side Retaining Walls. Stone TypeN GaugePack includes 4 parts- 1 x Tunnel Portal- 1 x Tunnel Portal top capping stones strip- 1 x Right Hand side Retaining Wall- 1 x Left Hand side Retaining WallPlastic, Supplied Unpainted

Read more less

Depot Buffer Stops. N GaugePack of 4Suitable for Code 55/80 Rail. Depot Buffer StopsN Gauge for Code 55/80 RailPack of 4Supplied Unpainted

Read more less

Point Motor Heater Control Relay Cabinets.  N Gauge. Pack of 10.Point Motor Heater Cabinets These cabinets house Point Motor Heater Control RelaysPack of 10 (ten)N GaugeUnpainted, ready for painting to suit your lineside installation.Enamel paints are recommended.

Read more less

GRC Cable Trunking Angled sections. N Gauge. Pack of 4.GRC Cable Trunking parts4 Angled sections of trunkingN GaugeThese cable trunking parts are designed to be used with our other GRC Cable Trunking ground level straight, raise/lower and raised sections.Unpainted, ready to paint to suit your lineside scene.Enamel paints are recommended.

Read more less