Series 2 Two Track Catenary OO Gauge (Set E4)

Detailed Overhead Line Equipment 2 x MAGNETIC Registration Arms kit LEFT HAND for fitting to the SERIES 2 - Two Track Cantilever OHLEOO Gauge SET E4-6 - product code 4WH0900406Pack of 2 MAGNETIC Registration Arms that can support the fitting of contact wires (not included)REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment - 2 MAGNETIC Registration Arms LEFT HAND for fitting to the SERIES 2 - Two Track Cantilever OHLEREGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-6 - product code 4WH0900406 This set E4-6 includes TWO (2) MAGNETIC Type Left Handed Registration Arms that are intended for fitting to the SERIES 2 - Two Track Cantilever kits (SETs E4-1 to E4-3)PLEASE NOTE that this registration arm kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included. PLEASE NOTE each registration arm has 2 magnets which will need to be fitted into the registration arms Other types of registration arms for the SERIES 2 - Two Track Cantilever kits are available as follows:- SET E4-4 Left Hand Registration Arm (Series 2) SET E4-5 Right Hand Registration Arm (Series 2) SET E4-7 Right Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.

Read more less

Detailed Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 130mm Arm, including Magnetic BaseOO GaugeSET E4-2 - product code 4WH0900402PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 130mm Arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-2 - product code 4WH0900402This set E4-2 includes parts to construct one (1) basic SERIES 2 - Two Track Cantilever Mast structure. One Pile Driven style Base is included in the kit, with magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.Registration Arm options for the SERIES 2 - Two Track Cantilever type OHLE are available to Purchase Separately as follows:- SET E4-4 Left Hand Registration Arm (Series 2) SET E4-5 Right Hand Registration Arm (Series 2) SET E4-6 Left Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E4-7 Right Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit] OHLE Structure kit (SET E4-2) dimensions:- Maximum height above baseboard (including base) - 115mm Overall length of structure (across the tracks) - 131mm Max width of structure/base - 14mm Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 100mm Arm, including Magnetic BaseOO GaugeSET E4-1 - product code 4WH0900401PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 100mm Arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-1 - product code 4WH0900401This set E4-1 includes parts to construct one (1) basic SERIES 2 - Two Track Cantilever Mast structure. One Pile Driven style Base is included in the kit, with magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.Registration Arm options for the SERIES 2 - Two Track Cantilever type OHLE are available to Purchase Separately as follows:- SET E4-4 Left Hand Registration Arm (Series 2) SET E4-5 Right Hand Registration Arm (Series 2) SET E4-6 Left Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E4-7 Right Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit] OHLE Structure kit (SET E4-1) dimensions:- Maximum height above baseboard (including base) - 115mm Overall length of structure (across the tracks) - 103mm Max width of structure/base - 14mm Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment 2 x MAGNETIC Registration Arms kit RIGHT HAND for fitting to the SERIES 2 - Two Track Cantilever OHLEOO Gauge SET E4-7 - product code 4WH0900407Pack of 2 MAGNETIC Registration Arms that can support the fitting of contact wires (not included)REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment - 2 MAGNETIC Registration Arms RIGHT HAND for fitting to the SERIES 2 - Two Track Cantilever OHLEREGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-7 - product code 4WH0900407 This set E4-7 includes TWO (2) MAGNETIC Type Right Handed Registration Arms that are intended for fitting to the SERIES 2 - Two Track Cantilever kits (SETs E4-1 to E4-3)PLEASE NOTE that this registration arm kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included.PLEASE NOTE each registration arm has 2 magnets which will need to be fitted into the registration arms Other types of registration arms for the SERIES 2 - Two Track Cantilever kits are available as follows:- SET E4-4 Left Hand Registration Arm (Series 2) SET E4-5 Right Hand Registration Arm (Series 2) SET E4-6 Left Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.

Read more less

Magnetic Pile Driven style base kit for Overhead Line Equipment Structures - SERIES 2 - Two Track Cantilever typeOO GaugeSET E4-9 - product code 4WH0900409Kit included 1 BASE, 2 SPACERS with 2 MAGNETS - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWMagnetic Pile Driven style base kit for Overhead Line Equipment Structures - SERIES 2 - Two Track Cantilever typeBASE with MAGNETS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-9 - product code 4WH0900409This set E4-9 includes 1 Pile Driven style Base, 2 spacers with 2 magnets. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - these bases are suitable for mounting the Overhead Line Equipment Structures of the SERIES 2 - Two Track Cantilever type (SETs E4-1 to E4-3). All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.

Read more less

Post Mounted Tensioners and Cable Holders for Overhead Line Equipment Structures - SERIES 2 - Two Track Cantilever typeOO GaugeSET E4-8 - product code 4WH0900408Post Mounted Tensioners only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWPost Mounted Tensioners and Cable Holders for Overhead Line Equipment Structures - SERIES 2 - Two Track Cantilever typePost Mounted Tensioners only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-8 - product code 4WH0900408This set E4-8 includes Two (2) Post Mounted wire Tensioners and Cable Holders (non-working). PLEASE NOTE - these parts are suitable for mounting to the Overhead Line Equipment Structures of the SERIES 2 - Two Track Cantilever type (SETs E4-1 to E4-3). All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.

Read more less

Detailed Overhead Line Equipment 2 x Registration Arms RIGHT HAND for SERIES 2 Twin Track Cantilever type OHLEOO Gauge SET E4-5 - product code 4WH0900405REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment 2 x Registration Arms RIGHT HAND for SERIES 2 - Two Track Cantilever type OHLEPLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-5 - product code 4WH0900405 This set E4-5 includes TWO (2) Right Handed Registration Arms that are intended for fitting to the SERIES 2 - Two Track Cantilever kits (SETs E4-1 to E4-3).PLEASE NOTE that these registration arms are NOT intended to support the fitting of contact wires. Other types of registration arms for the SERIES 2 - Two Track Cantilever OHLE are available as follows:- SET E4-4 Left Hand Registration Arm (Series 2) SET E4-6 Left Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E4-7 Right Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.

Read more less

Conductor Wire Mounts for Overhead Line Equipment Structures - SERIES 2 - Two Track Cantilever typeOO GaugeSET E4-10 - product code 4WH0900410Wire Mounts only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWConductor Wire Mounts for Overhead Line Equipment Structures - SERIES 2 - Two Track Cantilever typeWire Mounts only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-10 - product code 4WH0900410This set E4-10 includes Five (5) Conductor Wire Mounting Arms. PLEASE NOTE - these parts are suitable for mounting to the Overhead Line Equipment Structures of the SERIES 2 - Two Track Cantilever type (SETs E4-1 to E4-3). All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.

Read more less

Detailed Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 130mm Arm for mounting on Platforms, including Magnetic BaseOO GaugeSET E4-3 - product code 4WH0900403PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 130mm Arm for mounting onto Platforms, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-3 - product code 4WH0900403This set E4-3 includes parts to construct one (1) basic SERIES 2 - Two Track Cantilever Mast structure. One Concrete style Base is included in the kit, with magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.Registration Arm options for the SERIES 2 - Two Track Cantilever type OHLE are available to Purchase Separately as follows:- SET E4-4 Left Hand Registration Arm (Series 2) SET E4-5 Right Hand Registration Arm (Series 2) SET E4-6 Left Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E4-7 Right Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit] OHLE Structure kit (SET E4-3) dimensions:- Maximum height above platform (including base) - 101mm Overall length of structure (across the tracks) - 131mm Max width of structure/base - 14mm Nominal height of contact wire with Mast fitted onto an 18mm high platform (if wire fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment 2 x Registration Arms LEFT HAND for SERIES 2 - Two Track Cantilever type OHLEOO Gauge SET E4-4 - product code 4WH0900404REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment 2 x Registration Arms LEFT HAND for SERIES 2 - Two Track Cantilever type OHLEPLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-4 - product code 4WH0900404 This set E4-4 includes TWO (2) Left Handed Registration Arms that are intended for fitting to the SERIES 2 - Two Track Cantilever kits (SETs E4-1 to E4-3).PLEASE NOTE that these registration arms are NOT intended to support the fitting of contact wires. Other types of registration arms for the SERIES 2 - Two Track Cantilever OHLE are available as follows:- SET E4-5 Right Hand Registration Arm (Series 2) SET E4-6 Left Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] SET E4-7 Right Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.

Read more less