Series 1 Single Insulated Cantilever Catenary OO Gauge (Set E3)

Detailed Overhead Line Equipment Mast Structure KitSERIES 1 - Single Insulated Cantilever (SIC) Inner type with registration arm, including Magnetic BaseOO GaugeSET E3-1 - product code 4WH0900301PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 - Single Insulated Cantilever (SIC) Inner type with registration arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E3-1 - product code 4WH0900301This set E3-1 includes parts to construct one (1) basic SERIES 1 - Single Insulated Cantilever (SIC) type Mast structure. One Pile Driven style Base is included in the kit with height spacers and magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.Also included is a mast spacer tool, this will help you position the mast the correct distance from the track.All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves. OHLE Structure kit (SET E3-1) dimensions:- Maximum height above baseboard (including base) - 108mm Overall length of Inner type structure (across the track) - 76mm Max width of structure/base - 14mm Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment Mast Structure KitSERIES 1 - Single Insulated Cantilever (SIC) Outer type with registration arm, including Magnetic BaseOO GaugeSET E3-2 - product code 4WH0900302PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 - Single Insulated Cantilever (SIC) Outer type with registration arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E3-2 - product code 4WH0900302This set E3-2 includes parts to construct one (1) basic SERIES 1 - Single Insulated Cantilever (SIC) type Mast structure. One Pile Driven style Base is included in the kit with height spacers and magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.Also included is a mast spacer tool, this will help you position the mast the correct distance from the track.All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E3-2) dimensions:-Maximum height above baseboard (including base) - 108mmOverall length of Outer type structure (across the track) - 66mmMax width of structure/base - 14mmNominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment Mast Structure KitSERIES 1 - Single Insulated Cantilever (SIC) Inner type with MAGNETIC registration arm, including Magnetic BaseOO GaugeSET E3-3 - product code 4WH0900303PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 - Single Insulated Cantilever (SIC) Inner type with MAGNETIC registration arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E3-3 - product code 4WH0900303This set E3-3 includes parts to construct one (1) basic SERIES 1 - Single Insulated Cantilever (SIC) Inner type Mast structure that has a MAGENTIC type Registration Arm. PLEASE NOTE that this kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included.PLEASE NOTE the Magnets will need to be fitted into the Registration ArmsOne Pile Driven style Base is included in the kit with height spacers and magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.Also included is a mast spacer tool, this will help you position the mast the correct distance from the track.All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit] OHLE Structure kit (SET E3-3) dimensions:- Maximum height above baseboard (including base) - 108mm Overall length of Inner type structure (across the track) - 76mm Max width of structure/base - 14mm Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment Mast Structure KitSERIES 1 - Single Insulated Cantilever (SIC) Outer type with MAGNETIC registration arm, including Magnetic BaseOO GaugeSET E3-4 - product code 4WH0900304PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 - Single Insulated Cantilever (SIC) Outer type with registration arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E3-4 - product code 4WH0900304This set E3-4 includes parts to construct one (1) basic SERIES 1 - Single Insulated Cantilever (SIC) type Mast structure that has a MAGENTIC type Registration Arm. PLEASE NOTE that this kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included.PLEASE NOTE the Magnets will need to be fitted into the Registration ArmsOne Pile Driven style Base is included in the kit with height spacers and magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.Also included is a mast spacer tool, this will help you position the mast the correct distance from the track.All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]OHLE Structure kit (SET E3-4) dimensions:-Maximum height above baseboard (including base) - 108mmOverall length of Outer type structure (across the track) - 66mmMax width of structure/base - 14mmNominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment 5 Mast Structures KitSERIES 1 - Single Insulated Cantilever (SIC) Inner type with registration arm, including Magnetic BasePack of 5 MastsOO GaugeSET E3-5 - product code 4WH0900305PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 - Single Insulated Cantilever (SIC) Inner type with registration arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E3-5 - product code 4WH0900305This set E3-5 includes parts to construct five (5) basic SERIES 1 - Single Insulated Cantilever (SIC) type Mast structures. Five Pile Driven style Bases are included in the kit with height spacers and magnets to fit into the base and OHLE structures. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.Also included is a mast spacer tool, this will help you position the mast the correct distance from the track.All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves. OHLE Structure kit (SET E3-5) mast dimensions:- Maximum height above baseboard (including base) - 108mm Overall length of Inner type structure (across the track) - 76mm Max width of structure/base - 14mm Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment 5 Mast Structures KitSERIES 1 - Single Insulated Cantilever (SIC) Outer type with registration arm, including Magnetic BasePack of 5 MastsOO GaugeSET E3-6 - product code 4WH0900306PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 - Single Insulated Cantilever (SIC) Outer type with registration arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E3-6 - product code 4WH0900306This set E3-6 includes parts to construct five (5) basic SERIES 1 - Single Insulated Cantilever (SIC) type Mast structures. Five Pile Driven style Bases are included in the kit with height spacers and magnets to fit into the base and OHLE structures. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.Also included is a mast spacer tool, this will help you position the mast the correct distance from the track.All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E3-6) mast dimensions:-Maximum height above baseboard (including base) - 108mmOverall length of Outer type structure (across the track) - 66mmMax width of structure/base - 14mmNominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment 5 Mast Structures Kit SERIES 1 - Single Insulated Cantilever (SIC) Inner type with MAGNETIC registration arm, including Magnetic BasePack of 5 MastsOO GaugeSET E3-7 - product code 4WH0900307PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 - Single Insulated Cantilever (SIC) Inner type with MAGNETIC registration arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E3-7 - product code 4WH0900307This set E3-7 includes parts to construct five (5) basic SERIES 1 - Single Insulated Cantilever (SIC) Inner type Mast structures that have a MAGENTIC type Registration Arms. PLEASE NOTE that this kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included.PLEASE NOTE the Magnets will need to be fitted into the Registration ArmsFive Pile Driven style Bases are included in the kit with height spacers and magnets to fit into the base and OHLE structures. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.Also included is a mast spacer tool, this will help you position the mast the correct distance from the track.All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit] OHLE Structure kit (SET E3-7) mast dimensions:- Maximum height above baseboard (including base) - 108mm Overall length of Inner type structure (across the track) - 76mm Max width of structure/base - 14mm Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment 5 Mast Structure KitSERIES 1 - Single Insulated Cantilever (SIC) Outer type with MAGNETIC registration arm, including Magnetic BasePack of 5 MastsOO GaugeSET E3-8 - product code 4WH0900308PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 - Single Insulated Cantilever (SIC) Outer type with registration arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E3-8 - product code 4WH0900308This set E3-8 includes parts to construct five (5) basic SERIES 1 - Single Insulated Cantilever (SIC) type Mast structures that have MAGENTIC type Registration Arms. PLEASE NOTE that this kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included.PLEASE NOTE the Magnets will need to be fitted into the Registration ArmsFive Pile Driven style Bases are included in the kit with height spacers and magnets to fit into the base and OHLE structures. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.Also included is a mast spacer tool, this will help you position the mast the correct distance from the track.All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]OHLE Structure kit (SET E3-8) mast dimensions:-Maximum height above baseboard (including base) - 108mmOverall length of Outer type structure (across the track) - 66mmMax width of structure/base - 14mmNominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment 10 Mast Structures KitSERIES 1 - Single Insulated Cantilever (SIC) Inner type with registration arm, including Magnetic BasePack of 10 MastsOO GaugeSET E3-9 - product code 4WH0900309PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 - Single Insulated Cantilever (SIC) Inner type with registration arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E3-9 - product code 4WH0900309This set E3-9 includes parts to construct ten (10) basic SERIES 1 - Single Insulated Cantilever (SIC) type Mast structures. Ten Pile Driven style Bases are included in the kit with height spacers and magnets to fit into the base and OHLE structures. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.Also included is a mast spacer tool, this will help you position the mast the correct distance from the track.All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves. OHLE Structure kit (SET E3-9) mast dimensions:- Maximum height above baseboard (including base) - 108mm Overall length of Inner type structure (across the track) - 76mm Max width of structure/base - 14mm Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment 10 Mast Structures KitSERIES 1 - Single Insulated Cantilever (SIC) Outer type with registration arm, including Magnetic BasePack of 10 MastsOO GaugeSET E3-10 - product code 4WH0900310PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 - Single Insulated Cantilever (SIC) Outer type with registration arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E3-10 - product code 4WH0900310This set E3-10 includes parts to construct ten (10) basic SERIES 1 - Single Insulated Cantilever (SIC) type Mast structures. Ten Pile Driven style Bases are included in the kit with height spacers and magnets to fit into the base and OHLE structures. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.Also included is a mast spacer tool, this will help you position the mast the correct distance from the track.All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E3-10) mast dimensions:-Maximum height above baseboard (including base) - 108mmOverall length of Outer type structure (across the track) - 66mmMax width of structure/base - 14mmNominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment 10 Mast Structures Kit SERIES 1 - Single Insulated Cantilever (SIC) Inner type with MAGNETIC registration arm, including Magnetic BasePack of 10 MastsOO GaugeSET E3-11 - product code 4WH0900311PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 - Single Insulated Cantilever (SIC) Inner type with MAGNETIC registration arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E3-11 - product code 4WH0900311This set E3-11 includes parts to construct ten (10) basic SERIES 1 - Single Insulated Cantilever (SIC) Inner type Mast structures that have a MAGENTIC type Registration Arms. PLEASE NOTE that this kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included.PLEASE NOTE the Magnets will need to be fitted into the Registration ArmsTen Pile Driven style Bases are included in the kit with height spacers and magnets to fit into the base and OHLE structures. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.Also included is a mast spacer tool, this will help you position the mast the correct distance from the track.All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit] OHLE Structure kit (SET E3-11) mast dimensions:- Maximum height above baseboard (including base) - 108mm Overall length of Inner type structure (across the track) - 76mm Max width of structure/base - 14mm Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed Overhead Line Equipment 10 Mast Structure KitSERIES 1 - Single Insulated Cantilever (SIC) Outer type with MAGNETIC registration arm, including Magnetic BasePack of 10 MastsOO GaugeSET E3-12 - product code 4WH0900312PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 - Single Insulated Cantilever (SIC) Outer type with registration arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E3-12 - product code 4WH0900312This set E3-12 includes parts to construct ten (10) basic SERIES 1 - Single Insulated Cantilever (SIC) type Mast structures that have MAGENTIC type Registration Arms. PLEASE NOTE that this kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included.PLEASE NOTE the Magnets will need to be fitted into the Registration ArmsTen Pile Driven style Bases are included in the kit with height spacers and magnets to fit into the base and OHLE structures. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.Also included is a mast spacer tool, this will help you position the mast the correct distance from the track.All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]OHLE Structure kit (SET E3-12) mast dimensions:-Maximum height above baseboard (including base) - 108mmOverall length of Outer type structure (across the track) - 66mmMax width of structure/base - 14mmNominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less