Workshop & Depot (N)

Key Clamp Safety Railing Used Around Depots, Yards, Workshops And Much More...Pack of 6 Lengths - 68mm Each (408mm Total)N GaugeAvailable Pre-Coloured In Safety Yellow/Silver Durable Plastic Material, Easily Glued 1mm Drill Holes Recommended Or Affix With GluePlease select colour from the menu

Read more less

Key Clamp Safety Railing used Around Depots, Yards, Workshops And Much More...N Gauge. Pack of 4 end pieces. Pack of 4 Ends Pieces With Curved Barrier - 24mm Wide EachAvailable Pre-Coloured In Safety Yellow/Silver Durable Plastic Material, Easily Glued 1mm Drill Holes Recommended Or Affix With GluePlease select colour from the menu above

Read more less

Workshop Welder Gas Bottle TrolleyN GaugeOne Detailed Welder Gas Bottle TrolleyGreat addition for any Workshop or DepotN GaugeUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended

Read more less

Maintenance Hoist and Frame including, hoist, chain, hook. N GaugeThis is a detailed Maintenance Hoist and Frame Kit, often seen at maintenance depots and works, used for lifting parts up to 500kg in weight during maintenance of locomotives and rolling stockN GaugeIncludes Hook And Tubing To Simulate Chain All parts supplied unpaintedDimensions of completed kit:-Overall Height - 54mmOverall width - 27mmOverall length - 57mm

Read more less

Portable Modular Stackable Buildings - Pack of 2, including 1 set of Access Steps in N Gauge Supplied unpaintedPortable Modular Stackable Buildings, including Access Steps - Pack of 2 N Gauge Pack includes:- 2 - Modular Buildings 1 - Set of Access Steps The buildings can be stacked on top of each other, side by side or separate. Size of each Building (approx.) - 42mm x 22mm x 16mm Supplied unpainted. on a sprue. Glazing is not supplied, however access from underneath is provided to allow some small squares of clear plastic to be fitted behind the window apertures if desired.

Read more less

Detailed Kit for a Diesel Fuelling Point (Without Hardstanding) - N Gauge.This is an unpainted Kit containing over 15 parts; Baseplate is approx. 12.5cm x 0.95cm.This is a Detailed Kit for a Diesel Fuelling Point (Without Hardstanding) in N Gauge. The kit contains over 15 parts including a baseplate measuring approx. 12.5cm x 0.95cm that has locating holes for the fuelling point parts. The baseplate of the fuelling point is designed to sit on top of your baseboard alongside your track. All parts are supplied unpainted and will need to be removed from sprues, painted and assembled, full instructions are provided with each kit. The overall height of the Fuelling Point Canopy is approx. 3.3cm.The overall width of the Fuelling Point Canopy is approx. 3cm Track, Glue and Paints are NOT included.

Read more less

Gas Powered Fork Lift Truck with 2 PalletsN GaugeGas Powered Fork Lift Truck (with 2 Pallets)N GaugePack includes-1 - Fork Lift Truck2 - Empty Wooden PalletsGreat Addition for any 1960s Onward LayoutSupplied Unpainted

Read more less

Trade Waste Disposal Bins2 Open with Rubbish, 2 ClosedN GaugePack of 4 Pack of 4 Trade Waste Disposal BinsN Gauge2 of them have the one top cover ajar and the other cover fully open, depicting rubbish bags inside.The other 2 bins have the covers closed.Unpainted ready to paint to suit your depot or workshop scene

Read more less

N GaugeDepot Fuel-Oil Storage Tank (N Gauge)Depot Fuel-Oil Storage Tanks are used to store fuel or lubricating oil at industrial facilities or depots. Often old tank wagons have their wheels and buffers removed, and have pipework, valves and ladders fitted. The grounded tank is mounted on sleepers at the depot to provide storage for locomotive fuel or oil.  Pack includes 1 x Depot Fuel-Oil Storage Tank (N Gauge)Provided Unpainted, Paint To Suited Colours

Read more less

Detailed Pallet TrucksN GaugePack of 2Detailed Pallet TrucksPack of 2N GaugeHand operated trucks for moving pallets around depots and workshopsUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended(The pallets and loads shown in the picture are NOT included)

Read more less

Portable Modular Building - Pack of 1 in N Gauge Supplied unpaintedPortable Modular Building - Pack of 1 N Gauge Building size (approx.) - 42mm x 22mm x 16mm Supplied unpainted, on a sprue Glazing is not supplied, however access from underneath is provided to allow some small squares of clear plastic to be fitted behind the window apertures if desired.

Read more less

Detailed Kit for a Double Track Diesel Fuelling Point - N Gauge. The kit is suitable for Peco Code 55 rails (not supplied). This is an unpainted Kit containing over 15 parts; Baseplate is approx. 12.5cm x 5.65cm.This is a Detailed Kit for a Double Track Diesel Fuelling Point in N Gauge. The kit is suitable for fitting with Code 55 rails (not supplied). The kit contains over 15 parts including a baseplate measuring approx. 12.5cm x 5.65cm that has locating holes for the fuelling point parts and slots for the rails (rails not provided). The baseplate of the fuelling point is designed to sit on top of your baseboard and is the same thickness as the sleepers of your Code 55 track. All parts are supplied unpainted and will need to be removed from sprues, painted and assembled, full instructions are provided with each kit. The overall height of the Fuelling Point Canopy is approx. 3.3cm.The overall width of the Fuelling Point Canopy is approx. 3cm Rails, Glue and Paints are NOT included. The track centres spacing is 2.65cm which is compatible with our Double Track Hardstanding

Read more less

Pack of 6 Access Walkways, Supports With Pipework Runs N GaugePack Includes:6 x Grey Platform Tops With White Markings 113mm Long x 12mm Wide With White Concrete Supports 4 x Sets of Platform Steps (unpainted)

Read more less

Pallets with Brake BlocksN GaugePack of 6Most railway depots and workshops need a supply of new brake blocks for fitting to rolling stock during their regular maintenance exams.  The new brake blocks are often delivered to the depot stacked onto a pallet.Pack of 6 Pallets, supplied unpainted, we recommend a light coat of primer before painting to suit your depot or workshop scene.

Read more less

Pack of 10 detailed Oil BarrelsN GaugeDetailed Oil Barrels (10)N GaugePack of 10 Barrels includes:-3 Dented Oil Barrels2 Ribbed Oil Barrels4 Standard Oil Barrels1 Oil Barrel with PumpUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended

Read more less

Wooden PalletsN GaugePack of 10Wooden Pallets Pack of 10 (ten)N GaugeUnpainted, ready for painting to suit your installation.Enamel paints are recommended.

Read more less

Workshop Metal Cupboards. N Gauge. Pack of 6Workshop Metal CupboardsPack of 6Great Addition For Any Industrial Scene, Workshop, Depot or Office2 With Doors Missing2 With Part Open Doors2 With Closed DoorsN GaugeSupplied Unpainted, Paint And Weather To Your Preference

Read more less

Waste SkipsN GaugePack of 2 skips.Waste SkipsPack of 2Great Addition For Any Layout Scene, Workshop, Scrapyard, Depot or car parkN GaugeSupplied In Yellow, Weather to Your Preference

Read more less

Hydrovane Type Air Compressor TrailerN GaugeSupplied with a length of rubber hose.Hydrovane Type Air CompressorOne portable diesel powered air compressor trailer.They were used at a massive variety of railway and industrial sites including Depots, Yards, Workshops, Building sites etc. N GaugeThe model is a one piece resin item with a length of rubber hose supplied that can be fitted as desired.This model is supplied unpainted for you to paint to your own specifications. It's recommended to apply a light coat of primer paint first.

Read more less

Wheel Chocks. N Gauge. Pack of 4Pack of 4 Wheel ChocksA great detail addition for any depot or sidingsN GaugeUnpainted, ready to paint to suit your depot, workshop or sidings sceneEnamel paints are recommended.

Read more less

Locomotive & Coach Inspection Platforms. N Gauge. Pack of 4 platforms (2 Large, 2 Small).Locomotive & Coach Inspection PlatformsN GaugePack of 4 platforms-- 2 Left Hand - 1 Small (e.g. for Coaches) & 1 Large (e.g. for Locomotives) - 2 Right Hand - 1 Small (e.g. for Coaches) & 1 Large (e.g. for Locomotives) Great Detail For Any N Gauge LayoutUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended

Read more less

Pack of 4 Metal Type Workshop BenchesN Gauge Pack of 4 Workshop Benches - metal frame typeN Gauge Unpainted ready to paint to suit your depot or workshop sceneEnamel paints are recommended.

Read more less

Workshop Lockers are found in most workshops. Each of the 4 locker units has 12 lockers.N Gauge.Workshop Locker UnitsPack of 4Great Addition For Any Workshop, Depot or Office1 With a Door Open and a Door Missing2 With a Part Open Door1 With Closed DoorsN GaugeSupplied Unpainted, Paint And Weather To Your Preference

Read more less

Pack of 3 Wheelset Cradles used for the storage of storage and movement of wheelsetsN GaugePack of 3 Wheelset Cradles used for the storage of storage and movement of wheelsets within a depot, or for the transporting of wheelsets by rail or road.N GaugeThese come Unpainted, Paint in your desired colourThe detailed Wheelsets are not included in this pack but are Available Separately

Read more less

Double Length Inspection Pit for Code 55 N Gauge railsBase Dimensions approx. 250mm in length x 28mm in WidthSingle Track - Four piece kit (unpainted) Double Length Inspection Pit for Code 55 N Gauge railsBase Dimensions approx. 250mm in length x 28mm in WidthSingle Track - Four piece kit to make One Double Length Depot Inspection Pit in grey plastic.This is a four-piece plastic kit that needs to be glued together. Supplied unpainted. The rails are simply slotted into the baseplates after removal of the sleepers. (Rails not included) Once the rails are fitted the pit section can be glued under each base, the two sections can then be glued together.  A hole approx. 246mm long x 12mm wide at least 8mm deep will need to be cut into in your baseboard to insert the pit. Two of these kits can be placed side-by-side for double track workshops. A separate kit is available for shorter length pits of 125mm. Product- 2WH1411503

Read more less

Inspection Pit for Code 55 N Gauge railsBase Dimensions 125mm in length x 28mm in WidthSingle Track - Two piece kit - unpainted Inspection Pit for Code 55 N Gauge railsBase Dimensions 125mm in length x 28mm in WidthSingle Track - Two piece kit to make One Depot Inspection Pit in grey plastic.This is a two-piece plastic kit that needs to be glued together. Supplied unpainted. The rails are simply slotted into the baseplate after removal of the sleepers. (Rails not included) Once the rails are fitted the pit section can be glued under the base.  A hole approx. 124mm long x 12mm wide at least 8mm deep will need to be cut into in your baseboard to insert the pit. Two of these kits can be placed side-by-side for double track workshops. A separate kit is available for double length pits of 247mm. Product- 2WH1411504

Read more less

Locomotive Depot Load Bank Kit - see DescriptionN GaugeLocomotive Depot Load Bank KitN Gauge What is a Load Bank?A load bank is a piece of electrical test equipment used to simulate an electrical load, to test an electric power source without connecting it to its normal operating load.A locomotive would be positioned on one of the diesel test roads alongside the test monitoring building.Output power cables from the engines generator would be disconnected and joined to external cables that were part of a load bank.A load bank consists of resistances. This is so that the heat generated by the electrical energy can be dispersed.The output from the generator is checked at various loads which is done by increasing the resistance in the load bank.Current and voltage are measured on meters located inside the Test House. The horsepower of the engine could also be set.You can now model a load bank setup with this kit, a great addition to any TMD on your layout.Included In The Locomotive Depot Load Bank Kit:1 x MDF Concrete Base With Pre-cut Holes For Safety Fencing & Barrier (unpainted)1 x set of Safety Fencing and Barrier in Yellow4 x Electrical Cabinets (unpainted)1 x Detailed Load Bank Container (unpainted)Footprints For This Kit Are As Follows:5.9cm Deep x 20.5cm LongAdditional Recommended Items- - 1 x Locomotive Inspection Platform- 1 x Depot Buffer Stop

Read more less

Superbly detailed model of a Class 37 power unit. N GaugeClass 37 / English Electric Type 3 Detailed Power Unit (one)N GaugePack includes:- one Class 37 power unitClass 37 locomotives are fitted with an EE 12CSVT power unit originally rated at 1,750bhp.This detailed model of a Class 37 power unit is intended to be used in depot/workshop or scrapyard scenes on your layout.Supplied unpainted, a light coat of primer is recommended before painting as desired to suit your layout.Note this model represents a typical power unit and generator of the type fitted to Class 37/0 locomotives when built.

Read more less

Hard standing base for Code 55 N Gauge railsHardstanding is 125mm in length x 56.5mm In WidthDouble Track at 26.5mm track centresOne pieceOne Depot area hardstanding base in grey plastic.The rails are simply slotted into the hardstanding after removal of the sleepers. 

Read more less

Class 47 Locomotive Wheelsets. (Includes one Intermodal Wheelset Cradle). N GaugePack of 6 wheelsetsDetailed Class 47 WheelsetsPack of 6To represent wheelsets from a Class 47 locomotive when removed from the bogies, Seen In Many Depots Throughout The Country Pack includes one Intermodal Wheelset Cradle for storage/transportation Unpainted, Weather To Your PreferenceN GaugeNOTE- These Wheelsets are for static display/dioramas only, they are not suitable for fitting to vehicles to run on your layout.

Read more less

Class 08,09,10 Shunting Locomotive Wheelsets.  N Gauge. Pack of 3Detailed Class 08,09,10 Locomotive WheelsetsPack of 3, two fitted with traction drive gearsTo represent wheelsets from a Class 08,09 or 10 shunting locomotive when removed from the loco frames, Seen In Many Depots Throughout The Country Unpainted, Weather To Your PreferenceN GaugeNOTE- These Wheelsets are for static display/dioramas only, they are not suitable for fitting to vehicles to run on your layout.

Read more less

15 Ton Vehicle Lifting Jack Set for Wagons and CarriagesN GaugeSet of 4 Jacks plus Control Trolley and Electrical Boxes15 Ton Vehicle Lifting Jack Set for Wagons and CarriagesN Gauge4 Jacks with a Control Trolley and two Electrical BoxesNote: these are static jacks.Representing Electric Vehicle Lifting Jacks as typically used in British Rail carriage and wagon maintenance depots throughout the country.Era: 1960s OnwardsPack Includes:- 4 x 15 Ton Lifting Jacks- 1 x Control Trolley- 2 x Wall Connection SocketsThis model is supplied unpainted for you to paint to your own specifications. It's recommended to apply a light coat of primer paint first.

Read more less

Detailed Electric Tugs as used around Depots and WorkshopsN GaugePack of 2Workshop Electric TugsN GaugeDetailed Workshop Electric Tugs, Used Around Depots, Workshops, Goods Sheds and Stations.Pack of 2:Includes: 1 with a Short and 1 with a Long Rear Load Area.This model is supplied unpainted for you to paint to your own specifications. It's recommended to apply a light coat of primer paint first.

Read more less

Dumper Truck and his Driver, 'Danny'. N Gauge.Diesel Dumper Truck and DriverN GaugePack includes-1 - Dumper Truck with DriverGreat Addition for any 1960s Onward LayoutSupplied Unpainted

Read more less

One Filing Cabinet with 8 DrawersN GaugeOne Filing Cabinet with 8 Drawers, 3 of them slightly openGreat addition for any Workshop or Depot OfficeN GaugeUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended

Read more less

This is a detailed static model of a Class 47 Locomotive Bogie.N GaugeA detailed static Class 47 Bogie (one)Brush Type 4, Class 47 locomotives are fitted with cast frame 3 axle bogies of 14ft 6in wheelbase, with two stage suspension, three traction motors and integral air braking equipment.This detailed static model of a Class 47 locomotive bogie is intended to be used in depot/workshop or scrapyard scenes on your layout.N GaugePack includes:- one Class 47 bogie, supplied unpainted. A light coat of primer is recommended before painting as desired to suit your layout.

Read more less

Axle Counter and Electrical Control BoxN Gauge2 Pairs Axle Counter Unit and Electrical Control BoxN Gauge2 Pairs Ready for painting to suit your installation.

Read more less

Superbly detailed model of a Class 47 power unit. N GaugeClass 47 / Brush Type 4 Detailed Power Unit (one)N GaugePack includes:- one Class 47 power unitClass 47 locomotives are fitted with a Sulzer 12LDA28-C power unit originally rated at 2,700bhp, but later de-rated to 2,580bhp.This detailed model of a Class 47 power unit is intended to be used in depot/workshop or scrapyard scenes on your layout.Supplied unpainted, a light coat of primer is recommended before painting as desired to suit your layout.

Read more less