Loco & Rolling Stock Parts (O)

Detailed BR Battery Type Portable High Intensity Head Lamps kit - WITH CRYSTALS.Add some superb detail to the front of your train.O Gauge.Pack contains 6 head lamps (unpainted) and 6 crystals.Detailed BR Battery Type Portable High Intensity Head Lamps kit - WITH CRYSTALSPack of 6  - O GaugeThese battery type portable head lamps are often used where locomotives are not fitted with their own head lamps such as when steam hauled charter trains are operated on the main network.Supplied with 6 crystals that can be glued into the front of each lamp.These lamps are supplied unpainted and should be painted white before fitting the crystals.Our Lamps and Crystal Fitting Guide can be downloaded from our Website.Each lamp has a slot underneath that may allow fitting onto a lamp bracket of your models.NOTE:- the crystals are very small and must be handled very carefully. Tweezers may be needed to position the crystals into the lamps.  A very small spot of superglue type adhesive may be used to secure each crystal. When using superglue type adhesive please always follow the manufacturers instructions.KIT Number L44

Read more less

BR(M) Oil Type Headlamps kit - WITH CRYSTALS. Add some superb detail to the front of your locomotives. Pack of 6 lamps - O GaugeBR(M) Oil Type Headlamps kit - WITH CRYSTALS.  Add some superb detail to the front of your locomotives.  Pack of 6 lamps - O Gauge Supplied with 6 jewel crystals that can be glued into the front of each lamp.O GaugeThese lamps are supplied unpainted, a light coat of primer is recommended before painting, then fitting the crystals. In early BR days some of these headlamps would have retained the LMS black colour however the BR standard would have been white. It's also possible to pick out the lens ring in brass colour before fitting the crystal.Each lamp has a slot underneath that may allow fitting onto a lamp bracket of your models.NOTE:- the crystals are very small and must be handled very carefully. Tweezers may be needed to position the crystals into the lamps. A very small spot of superglue type adhesive may be used to secure each crystal. When using superglue type adhesive please always follow the manufacturers instructions. Kit Number L11

Read more less

Detailed BR Oil Type Tail Lamps kit - WITH CRYSTALS. O Gauge.  Pack contains 6 tail lamps and 6 red crystals.Detailed BR Oil Type Tail Lamps kit - WITH CRYSTALSPack of 6 - O GaugeSupplied with 6 red crystals that can be glued into the front of each lamp.Our Lamps and Crystal Fitting Guide can be downloaded from our Website.These lamps are supplied unpainted and should be painted white before fitting the crystals.Each lamp has a slot underneath that may allow fitting onto a lamp bracket of your models.NOTE:- the crystals are very small and must be handled very carefully. Tweezers may be needed to position the crystals into the lamps. A very small spot of superglue type adhesive may be used to secure each crystal. When using superglue type adhesive please always follow the manufacturers instructions. Kit Number L2

Read more less

Railway "Not To Be Moved" boards, are used to indicate that a railway vehicle or a set of railway vehicles must not be moved or shunted (i.e., moved from one track to another) without specific authorization. The purpose of the "Not To Be Moved" board is to ensure that the railway wagons are not accidentally moved, which could cause damage to the goods or endanger the safety of workers or the public.It is important for railway workers and operators to follow the instructions on these boards to ensure the safe handling and transport of goods by rail. Not To Be Moved Boards - O Gauge (Pack Of 6) This Pack Includes 6 Boards 4 Boards With Lamp Brackets (These Fit Onto Many O Gauge Locomotives, Wagon & Coach Lamp Brackets) 2 Boards Representing The Magnetic Type To Attach To The Side Of Locomotive Bodies 16 (4 Spare) Pre-Cut Self Adhesive Not To Be Moved Stickers Brackets Supplied In White, But Also Seen In Red & Yellow Throughout British Rail Network (Examples Pictured)Ready for painting to suit your installation.Also Available In OO Gauge

Read more less

Detailed BR Side Lamps kit for use on Brake Vans - WITH CRYSTALS.Add some superb detail to the rear of your train.O Gauge.Pack contains 6 side lamps (unpainted), 6 white crystals and 6 red crystals.Information about of the use of Side Lamps can be found in the main product description below.Detailed BR Side Lamps kit for use on Brake Vans - WITH CRYSTALSPack of 6 lamps - O GaugeSupplied with 12 crystals, (6 x white and 6 x red) that can be glued into the front and back of each lamp.Our Lamps and Crystal Fitting Guide can be downloaded from our Website.These lamps are supplied unpainted and should be painted white before fitting the crystals (please see information below about side lamp use).BR mostly painted side lamps white, however for a while the Midland Region continued with the LMS practice of painting lamps black.Each lamp has slots underneath that may allow fitting onto a lamp bracket of your models.The tail lamp shown in the pictures are not included, however these are available separately, Product Code: 7WH0800802 Link: https://westhillwagonworks.com/locomotive-parts/41-detailed-br-oil-type-tail-lamps-kit-l2-with-crystals-o-gauge-pack-of-6.html NOTE:- the crystals are very small and must be handled very carefully. Tweezers may be needed to position the crystals into the lamps.  A very small spot of superglue type adhesive may be used to secure each crystal. When using superglue type adhesive please always follow the manufacturers instructions. Information about of the use of Side Lamps by British Rail BR Brake vans carried a tail lamp and two side lamps, the side lamps showing white lights to the front and rear, but having red removable slide shades so that they were able to show red lights to the rear.   Side lamps had a slot/bracket fitting on both sides so that they were a standard design that could go on either side of the van, and be reversed if necessary. At night, during fog or falling snow, or in tunnels, the brake van displayed 3 red lights to the rear and a white light on each side facing forward.  This was so that loco crew could look out either side of the loco and affirm that the whole train was following the loco in good order.   If the train was routed into a loop or refuge siding, or was on a reception or departure road adjacent to a running line, the red removable slide shade was removed from the side lamp on that side of the van, so that the display was of 2 red lights and a white, in a V shape with the white light closest to the main running line.  If the guard wanted to attract the traincrew's attention to a problem, this could be done by reversing the side lamps to show a red light forward; signalmen and others would also be able to spot this and you wouldn't go far before the train was stopped. If a train was being propelled with the brake van leading in the right direction along a running line, the two side lamps showed a white light 'forward' in the direction of travel, and the tail lamp was removed.   Kit Number L20

Read more less

BR(LNER Style) Oil Type Headlamps kit - WITH CRYSTALS. Add some superb detail to the front of your London North Eastern Region locomotives. Pack of 6 lamps - O GaugeBR(LNER Style) Oil Type Headlamps kit - WITH CRYSTALS.  Add some superb detail to the front of your London North Eastern Region locomotives.  Pack of 6 lamps - O Gauge Supplied with 6 jewel crystals that can be glued into the front of each lamp.Our Lamps and Crystal Fitting Guide can be downloaded from our Website.These lamps are supplied unpainted, a light coat of primer is recommended before painting, then fitting the crystals. Each lamp has a slot underneath that may allow fitting onto a lamp bracket of your models.NOTE:- the crystals are very small and must be handled very carefully. Tweezers may be needed to position the crystals into the lamps. A very small spot of superglue type adhesive may be used to secure each crystal. When using superglue type adhesive please always follow the manufacturers instructions. Kit Number L23

Read more less

Detailed BR Battery Type Tail Lamps kit - WITH CRYSTALS.Add some superb detail to the rear of your train.O Gauge.Pack contains 6 tail lamps and 6 red crystals.Detailed BR Battery Type Tail Lamps kit - WITH CRYSTALSPack of 6  - O GaugeSupplied with 6 red crystals that can be glued into the front of each lamp.These lamps are supplied unpainted and should be painted white before fitting the crystals.Our Lamps and Crystal Fitting Guide can be downloaded from our Website.Each lamp has a slot underneath that may allow fitting onto a lamp bracket of your models.NOTE:- the crystals are very small and must be handled very carefully. Tweezers may be needed to position the crystals into the lamps.  A very small spot of superglue type adhesive may be used to secure each crystal. When using superglue type adhesive please always follow the manufacturers instructions. KIT Number L19

Read more less

BR(SR) Oil Type Headlamps kit - WITH CRYSTALS. Add some superb detail to the front of your Southern Region locomotives. Pack of 6 lamps - O GaugeSupplied with 6 jewel crystals that can be glued into the front of each lamp.O GaugeThese lamps are supplied unpainted, a light coat of primer is recommended before painting, then fitting the crystals. Our Lamps and Crystal Fitting Guide can be downloaded from our Website.Each lamp has a slot underneath that may allow fitting onto a lamp bracket of your models.NOTE:- the crystals are very small and must be handled very carefully. Tweezers may be needed to position the crystals into the lamps. A very small spot of superglue type adhesive may be used to secure each crystal. When using superglue type adhesive please always follow the manufacturers instructions. Kit Number L16

Read more less

BR(WR) Oil Type Headlamps kit - WITH CRYSTALS. Add some superb detail to the front of your Western Region locomotives. Pack of 6 lamps - O GaugeBR(WR) Oil Type Headlamps kit - WITH CRYSTALS.  Add some superb detail to the front of your Western Region locomotives.  Pack of 6 lamps - O Gauge Supplied with 6 jewel crystals that can be glued into the front of each lamp.Our Lamps and Crystal Fitting Guide can be downloaded from our Website.These lamps are supplied unpainted, a light coat of primer is recommended before painting, then fitting the crystals. Each lamp has a slot underneath that may allow fitting onto a lamp bracket of your models.NOTE:- the crystals are very small and must be handled very carefully. Tweezers may be needed to position the crystals into the lamps. A very small spot of superglue type adhesive may be used to secure each crystal. When using superglue type adhesive please always follow the manufacturers instructions. Kit Number L12

Read more less

BR Battery Type Tail Lamps, O Gauge. Pack of 6 lamps.BR Battery Type Tail LampsO GaugePack of 6 lamps with Mounting Holes To Fit Onto Tail Lamp Brackets.This model is supplied unpainted for you to paint to your own specifications.It's recommended to apply a light coat of primer paint first.Lamps SET L6

Read more less

BR Oil Type Tail Lamps, O Gauge. Pack of 6 lamps.Detailed BR Oil Type Tail LampsO GaugePack of 6 lamps with Mounting Holes To Fit Onto Tail Lamp Brackets.This model is supplied unpainted for you to paint to your own specifications.It's recommended to apply a light coat of primer paint first.Lamps SET L3

Read more less