In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Scrap Peak Cab - With a Rear BulkheadDetail Your Depot Unlike No Other!, With these Amazing Detailed Scrap Peak CabsOO GaugeOptional Scrap Accessories Including:2 x Scrap Cab Doors, Rear Bulkhead Access Door, Nose Access Door, Seats 2 Unfolded & 1 Folded - OO GaugeThe Scrap Peak Cab is also available without Rear Cab BulkheadThis model is supplied unpainted, on the print sprue, and will need to be carefully removed by using fine Sprue Cutters. Once removed from the sprue a light coat of primer is recommended before painting as desired to suit your layout.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Scrap Peak Cab - Without a Rear BulkheadDetail Your Depot Unlike No Other!, With these Amazing Detailed Scrap Peak CabsOO GaugeOptional Scrap Accessories Including:2 x Scrap Cab Doors, Rear Bulkhead Access Door, Nose Access Door, Seats 2 Unfolded & 1 Folded - OO GaugeThe Scrap Peak Cab is also available with Rear Cab BulkheadThis model is supplied unpainted, on the print sprue, and will need to be carefully removed by using fine Sprue Cutters. Once removed from the sprue a light coat of primer is recommended before painting as desired to suit your layout.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Trade Waste Disposal Bins2 Open with Rubbish, 2 ClosedHO Scale (1:87)Pack of 4 Pack of 4 Trade Waste Disposal BinsHO Scale (1:87)2 of them have the one top cover ajar and the other cover fully open, depicting rubbish bags inside.The other 2 bins have the covers closed.Unpainted ready to paint to suit your depot or workshop scene
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Trade Waste Disposal Bins2 Open with Rubbish, 2 ClosedOO GaugePack of 4 Pack of 4 Trade Waste Disposal BinsOO Gauge2 of them have the one top cover ajar and the other cover fully open, depicting rubbish bags inside.The other 2 bins have the covers closed.Unpainted ready to paint to suit your depot or workshop scene
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Wooden PalletsN GaugePack of 10Wooden Pallets Pack of 10 (ten)N GaugeUnpainted, ready for painting to suit your installation.Enamel paints are recommended.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Wooden PalletsO GaugePack of 10Detailed Wooden Pallets Pack of 10 (ten)Each pallet has detailed wood grain & nail headsO GaugeUnpainted, ready for painting to suit your installation.Enamel paints are recommended.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Wooden PalletsOO GaugePack of 10Detailed Wooden Pallets Pack of 10 (ten)Each pallet has detailed wood grain & nail headsOO GaugeUnpainted, ready for painting to suit your installation.Enamel paints are recommended.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Workshop Storage Trays filled with nuts, bolts, screwsO GaugePack of 3 trays
Workshop Detailed Storage TraysO Gauge - Pack of 3 traysThe trays are depicted filled with nuts, bolts, screws & moreUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Workshop Storage Trays filled with nuts, bolts, screwsOO GaugePack of 3 trays
Workshop Detailed Storage TraysOO Gauge - Pack of 3 traysThe trays are depicted filled with nuts, bolts, screws & moreUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Kit for a Double Track Diesel Fuelling Point - N Gauge.
The kit is suitable for Peco Code 55 rails (not supplied).
This is an unpainted Kit containing over 15 parts; Baseplate is approx. 12.5cm x 5.65cm.This is a Detailed Kit for a Double Track Diesel Fuelling Point in N Gauge.
The kit is suitable for fitting with Code 55 rails (not supplied).
The kit contains over 15 parts including a baseplate measuring approx. 12.5cm x 5.65cm that has locating holes for the fuelling point parts and slots for the rails (rails not provided). The baseplate of the fuelling point is designed to sit on top of your baseboard and is the same thickness as the sleepers of your Code 55 track.
All parts are supplied unpainted and will need to be removed from sprues, painted and assembled, full instructions are provided with each kit.
The overall height of the Fuelling Point Canopy is approx. 3.3cm.The overall width of the Fuelling Point Canopy is approx. 3cm
Rails, Glue and Paints are NOT included.
The track centres spacing is 2.65cm which is compatible with our Double Track Hardstanding
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Kit for a Double Track Diesel Fuelling Point - OO Gauge.
The kit is available for either Code 100, Code 75 or Bullhead rails (please select from the menu above).
This is an unpainted Kit containing over 100 parts; Baseplate is 250mm x 125mm.
This is a Detailed Kit for a Double Track Diesel Fuelling Point in OO Gauge.
The kit is available for either Code 100, Code 75 or Bullhead rails, please select your option from the menu above.
The Kit contains over 100 parts including an MDF baseplate measuring 250mm x 125mm that has laser-cut grids and locating holes for the fuelling point parts and the rail chairs (provided). The baseplate of the fuelling point is designed to sit on top of your baseboard and is the same thickness as the sleepers of your Code 100, Code 75 or Bullhead track.
All parts are supplied unpainted and will need to be painted and assembled, full instructions are provided with each kit.
The overall height of the Fuelling Point Canopy is 6.4cm.
The track centre spacing is 6.4cm (the same as our Modern Image Depot Interior Kit - 4WH1409701)
Rails, Glue and Paints are NOT included.
Why not add some lighting to your Fuelling Point with our Batten Lighting Kit - 4WH0500201
Please note that the pictures show the Fuelling Point built with the additional Batten Lighting fitted, these are NOT included in the Fuelling Point Kit, they must be purchased separately.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Kit for a Double Track Diesel Fuelling Point - TT:120 Scale.
The kit is suitable for Peco Code 55 rails (not supplied).
This is an unpainted Kit containing over 20 parts; Baseplate is approx. 15.5cm x 7.8cm.This is a Detailed Kit for a Double Track Diesel Fuelling Point in TT:120 Scale.
The kit is suitable for fitting with Code 55 rails (not supplied).
The kit contains over 20 parts including an baseplate measuring approx. 15.5cm x 7.8cm that has locating holes for the fuelling point parts and slots for the rails (not provided). The baseplate of the fuelling point is designed to sit on top of your baseboard and is the same thickness as the sleepers of your Code 55 track.
All parts are supplied unpainted and will need to be painted and assembled, full instructions are provided with each kit.
The overall height of the Fuelling Point Canopy is approx. 4cm.
Rails, Glue and Paints are NOT included.
The track centres spacing is 4.3cm which is compatible with our Double Track Hardstanding
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Kit for a Diesel Fuelling Point (Without Hardstanding) - N Gauge.This is an unpainted Kit containing over 15 parts; Baseplate is approx. 12.5cm x 0.95cm.This is a Detailed Kit for a Diesel Fuelling Point (Without Hardstanding) in N Gauge.
The kit contains over 15 parts including a baseplate measuring approx. 12.5cm x 0.95cm that has locating holes for the fuelling point parts. The baseplate of the fuelling point is designed to sit on top of your baseboard alongside your track.
All parts are supplied unpainted and will need to be removed from sprues, painted and assembled, full instructions are provided with each kit.
The overall height of the Fuelling Point Canopy is approx. 3.3cm.The overall width of the Fuelling Point Canopy is approx. 3cm
Track, Glue and Paints are NOT included.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Kit for a Single Track Diesel Fuelling Point - OO Gauge.
The kit is available for either Code 100, Code 75 or Bullhead rails (please select from the menu above).
This is an unpainted Kit containing over 60 parts; Baseplate is approx. 20cm x 8.5cm.
This is a Detailed Kit for a Single Track Diesel Fuelling Point in OO Gauge.
The kit is available for either Code 100, Code 75 or Bullhead rails, please select your option from the menu above.
The Kit contains over 60 parts including an MDF baseplate measuring approx. 20cm x 8.5cm. that has laser-cut grids and locating holes for the fuelling point parts and the rail chairs (provided). The baseplate of the fuelling point is designed to sit on top of your baseboard and is the same thickness as the sleepers of your Code 100, Code 75 or Bullhead track.
All parts are supplied unpainted and will need to be painted and assembled, full instructions are provided with each kit.
The overall height of the Fuelling Point Canopy is approx. 6.4cm.
Rails, Glue and Paints are NOT included.
Why not add some lighting to your Fuelling Point with our Batten Lighting Kit - 4WH0500201
Please note that the pictures show the Fuelling Point built with the additional Batten Lighting fitted, these are NOT included in the Fuelling Point Kit, they must be purchased separately.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Diesel Loco High Intensity Headlights - Supplied unpaintedFour (4) Dummy Headlights with Clear Lenses
OO Gauge (supplied unpainted)From the mid 1980s British Rail fitted high intensity headlights to many types of diesel locomotives to help improve visibility of trains to trackside workers.
This set 1980s style square dummy headlights are supplied UNPAINTED, the pack includes:-
4 - High Intensity dummy headlights4 - High Intensity headlight clear lensesNotes:-
Please see the downloadable Diesel Headlights Instructions in the Attachment tab above.
There were many variations between different locomotives of the fitting and placement of headlights; therefore it is recommended to refer to photographs of the real thing when fitting these parts.
All parts are supplied unpainted.
Top-Tip - use a very light coat of white primer first, then paint the headlights before removing them from the sprue.
(Dummy Headlights - 1980s Style)
Set HL1
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Diesel Loco High Intensity Headlights - with LEDs - Supplied unpaintedFour LED Headlights
OO Gauge (supplied unpainted)From the mid 1980s British Rail fitted high intensity headlights to many types of diesel locomotives to help improve visibility of trains to trackside workers.
This set 1980s style square headlights are supplied with LEDs that can be wired within your locomotive, the UNPAINTED pack includes:-
4 - High Intensity headlights4 - High Intensity headlight clear lenses4 - LEDs (pre-wired with resistors)4 - LED housing boxes4 - Adaptors for use with fibre optic cable (f/o cable not supplied)Notes:-
Please see the downloadable Diesel Headlights Instructions in the Attachment tab above.
There were many variations between different locomotives of the fitting and placement of headlights; therefore it is recommended to refer to photographs of the real thing when fitting these parts.
All parts are supplied unpainted.
Note that in order to fit these headlights with LEDs, a 1.5mm hole will need to be drilled into the front of your model in the correct place.
The LEDs supplied are pre-wired with resistors, and are suitable for connection direct to a suitable 12v power feed within your locomotive.
The LEDs may also be suitable for wiring to a DCC decoder output (please refer to your decoder manufacturers' instructions).
Top-Tip - use a very light coat of white primer first, then paint the headlights before removing them from the sprue.
(Headlights - 1980s Style)
SET HL2
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Kit for a Single Track Diesel Servicing Point - OO Gauge.
This is an unpainted Kit containing over 60 parts; Baseplate is approx. 30.5cm in length.This is a Detailed Kit for a Single Track Diesel Servicing Point in OO Gauge.
The Kit contains over 60 parts including an MDF baseplate measuring approx. 30.5cm in length that has laser-cut grids and locating holes for the servicing point parts.
The baseplate of the servicing point is designed to sit on top of your baseboard alongside your track.
All parts are supplied unpainted and will need to be painted and assembled, full instructions are provided with each kit.
The overall height of the Servicing Point Canopy is approx. 6.4cm.
Rails, Glue and Paints are NOT included.
Why not add some lighting to your Servicing Point with our Batten Lighting Kit - 4WH0500201
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Kit for a Single Track Diesel Servicing Point - OO Gauge.
This kit has a hardstanding for either Code 100, Code 75 or Bullhead rails (please select from the menu above).
This is an unpainted Kit containing over 90 parts; Baseplate is approx. 30.5cm x 8.4cm.
his kit has a hardstanding for either Code 100, Code 75 or Bullhead rails (please select from the menu above).
The Kit contains over 90 parts including an MDF baseplate measuring approx. 30.5cm x 8.4cm. that has laser-cut grids and locating holes for the servicing point parts and the rail chairs (provided).
The baseplate of the servicing point is designed to sit on top of your baseboard and is the same thickness as the sleepers of your Code 100, Code 75 or Bullhead Rail track.
All parts are supplied unpainted and will need to be painted and assembled, full instructions are provided with each kit.
The overall height of the Servicing Point Canopy is approx. 6.4cm.
Rails, Glue and Paints are NOT included.
Why not add some lighting to your Servicing Point with our Batten Lighting Kit - 4WH0500201
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
BR Disc Type Ground Signals.N Gauge.Pack of 6 with Disc Face Sticker Sheet.Ground Signals BR Type Disc (Pack of 6 Disc Type Ground Signals) With Sticker SheetN GaugeIncludes Sticker Sheet As PicturedComes Unpainted, Simply Paint In Black and the Rear Weight Disc in White
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
BR Disc Type Ground Signals.OO Gauge.Pack of 6 with Disc Face Sticker Sheet.Ground Signals BR Type Disc (Pack of 6 Disc Type Ground Signals) With Sticker SheetOO GaugeIncludes Sticker Sheet As PicturedComes Unpainted, Simply Paint In Black and the Rear Weight Disc in White
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
BR Disc Type Ground Signals.TT:120 Scale.Pack of 6 with Disc Face Sticker Sheet.Ground Signals BR Type Disc (Pack of 6 Disc Type Ground Signals) With Sticker SheetTT:120 ScaleIncludes Sticker Sheet As PicturedComes Unpainted, Simply Paint In Black and the Rear Weight Disc in WhiteNote the pictures depict OO & N Gauge models, updated TT:120 Scale pictures to follow soon.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
5.9Double Disc Type Ground Signals.OO Gauge.Pack of 6 with Disc Face Sticker Sheet.Ground Signals Double Disc Type (Pack of 6 Disc Type Ground Signals) With Sticker SheetOO GaugeIncludes Sticker Sheet As PicturedComes Unpainted, Simply Paint In Black and the Rear Weight Disc in White
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Open Frame Type Ground Signals.OO Gauge.Pack of 6 with Disc Face Sticker Sheet.Ground Signals Open Frame Type (Pack of 6 Disc Type Ground Signals) With Sticker SheetOO GaugeIncludes Sticker Sheet As PicturedComes Unpainted, Simply Paint In Black and the Rear Weight Disc in White
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
DMU Coolant Trolley. OO Gauge. Pack of 2DMU Coolant TrolleyOO GaugePack of 2
Detail Your 1960s Onward Station with a DMU Coolant TrolleyThis model is supplied unpainted for you to paint to your own specifications. It's recommended to apply a light coat of primer paint first.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
''The Sludge Gulper'' a Drain Cleaner Vacuum Tank Trailer.O Gauge.Used for clearing out drains.''The Sludge Gulper''O GaugeDrain Cleaner Vacuum Tank Trailer Used for clearing out residue that had built up in the drains and separation tanks after cleaning loco's on shed at Tinsley TMD (and other diesel sheds around the country).It was also deployed around the yard on the back of a small wagon to clear the drains of debris and general dirt/grime that would accumulate over time. This item is unpainted, paint to your requirements use light coat of primer first.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
''The Sludge Gulper'' a Drain Cleaner Vacuum Tank Trailer.OO Gauge.Used for clearing out drains.''The Sludge Gulper''OO GaugeDrain Cleaner Vacuum Tank Trailer Used for clearing out residue that had built up in the drains and separation tanks after cleaning loco's on shed at Tinsley TMD (and other diesel sheds around the country).It was also deployed around the yard on the back of a small wagon to clear the drains of debris and general dirt/grime that would accumulate over time. L : 53 mmW: 17 mmH : 32 mmThis item is unpainted, paint to your requirements use light coat of primer first.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of 20 Drawhooks (non-working) as used on BR Rolling Stock.Add some extra detail to your locomotives, coaches and wagons.OO Gauge (supplied unpainted)BR style Drawhooks pack includes:-
20 - Drawhooks (without couplings).Notes:-
These are non-working drawhooks intended for display purposes, they are not suitable for coupling vehicles together.
The drawhook shanks are 1mm square.
The drawhooks are supplied unpainted.
Top-Tip - use a light coat of primer first, and paint the drawhooks before removing them from the sprue.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 59mm Arm, including Magnetic BaseSET E10-1 - product code 2WH0901001PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 59mm Arm, including Magnetic Base9PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E10-1 - product code 2WH0901001This set E10-1 includes parts to construct one (1) basic SERIES 2 - Two Track Cantilever Mast structure. One Pile Driven style Base is included in the kit, with magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the SERIES 2 - Two Track Cantilever type OHLE are available to Purchase Separately as follows:-
SET E10-3 Left Hand Registration Arm (Series 2)
SET E10-4 Right Hand Registration Arm (Series 2)
SET E10-5 Left Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Sommerfeldt type OHL wires) note [wires are not included]
SET E10-6 Right Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Sommerfeldt type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E10-1) dimensions:-
Maximum height above baseboard (including base) - 69mm
Overall length of structure (across the tracks) - 59mm
Max width of structure/base - 8mm
Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 43mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 67mm Arm, including Magnetic BaseSET E10-2 - product code 2WH0901002PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 67mm Arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E10-2 - product code 2WH0901002This set E10-2 includes parts to construct one (1) basic SERIES 2 - Two Track Cantilever Mast structure. One Pile Driven style Base is included in the kit, with magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the SERIES 2 - Two Track Cantilever type OHLE are available to Purchase Separately as follows:-
SET E10-3 Left Hand Registration Arm (Series 2)
SET E10-4 Right Hand Registration Arm (Series 2)
SET E10-5 Left Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Sommerfeldt type OHL wires) note [wires are not included]
SET E10-6 Right Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Sommerfeldt type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E10-2) dimensions:-
Maximum height above baseboard (including base) - 69mm
Overall length of structure (across the tracks) - 67mm
Max width of structure/base - 8mm
Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 43mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment 2 x Registration Arms LEFT HAND for SERIES 2 - Two Track Cantilever type OHLESET E10-3 - product code 2WH0901003REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment 2 x Registration Arms LEFT HAND for SERIES 2 - Two Track Cantilever type OHLEPLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E10-3 - product code 2WH0901003
This set E10-3 includes TWO (2) Left Handed Registration Arms that are intended for fitting to the SERIES 2 - Two Track Cantilever kits (SETs E10-1 and E10-2).PLEASE NOTE that these registration arms are NOT intended to support the fitting of contact wires.
Other types of registration arms for the SERIES 2 - Two Track Cantilever OHLE are available as follows:-
SET E10-4 Right Hand Registration Arm (Series 2)
SET E10-5 Left Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E10-6 Right Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment 2 x Registration Arms RIGHT HAND for SERIES 2 - Two Track Cantilever type OHLESET E10-4 - product code 2WH0901004REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment 2 x Registration Arms RIGHT HAND for SERIES 2 - Two Track Cantilever type OHLEPLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E10-4 - product code 2WH0901004
This set E10-4 includes TWO (2) Left Handed Registration Arms that are intended for fitting to the SERIES 2 - Two Track Cantilever kits (SETs E10-1 and E10-2).PLEASE NOTE that these registration arms are NOT intended to support the fitting of contact wires.
Other types of registration arms for the SERIES 2 - Two Track Cantilever OHLE are available as follows:-
SET E10-3 Left Hand Registration Arm (Series 2)
SET E10-5 Left Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E10-6 Right Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - Mk1 Type A Structure Kit with 75mm Span for up to 2 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.SET E11-1 - product code 2WH0901101PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment Portal Structure Kit - Mk1 Type A Structure Kit with 75mm Span for up to 2 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E11-1 - product code 2WH0901101This set E11-1 includes parts to construct one (1) Mk1 Type A structure for up to 2 Tracks (2 Masts, 2 Bases and 1 Span section).
The two Pile Driven style Bases included in the kit come with magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the Mk1 Style OHLE are available to Purchase Separately as follows:-
SET E11-5 - Mk1 Registration Arms and Catenary Wire Supports for Type A & B Structures (SET E11-5) - product code 2WH0901105
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E11-1) dimensions:-
Maximum height above baseboard (including base) - 65mm
Overall length of structure (across the tracks) - 91mm
Max width of structure/base - 8mm
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - Mk1 Type B Structure Kit with Lattice Masts and a 75mm Span for up to 2 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.SET E11-11 - product code 2WH0901111PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment Portal Structure Kit - Mk1 Type B Structure Kit with Lattice Masts and a 75mm Span for up to 2 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E11-11 - product code 2WH0901111This set E11-11 includes parts to construct one (1) Mk1 Type A structure for up to 2 Tracks (2 Lattice Masts, 2 Bases and 1 Span section).
The two Pile Driven style Bases included in the kit come with magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the Mk1 Style OHLE are available to Purchase Separately as follows:-
SET E11-5 - Mk1 Registration Arms and Catenary Wire Supports for Type A & B Structures (SET E11-5) - product code 2WH0901105
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E11-11) dimensions:-
Maximum height above baseboard (including base) - 65mm
Overall length of structure (across the tracks) - 91mm
Max width of structure/base - 8mm
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - Mk1 Type B Structure Kit with Lattice Masts and a 135mm Span for up to 4 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.SET E11-12 - product code 2WH0901112PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment Portal Structure Kit - Mk1 Type B Structure Kit with Lattice Masts and a 135mm Span for up to 4 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E11-12 - product code 2WH0901112This set E11-12 includes parts to construct one (1) Mk1 Type B structure for up to 4 Tracks (2 Lattice Masts, 2 Bases and 1 Span section).
The two Pile Driven style Bases included in the kit come with magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the Mk1 Style OHLE are available to Purchase Separately as follows:-
SET E11-5 - Mk1 Registration Arms and Catenary Wire Supports for Type A & B Structures (SET E11-5) - product code 2WH0901105
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E11-12) dimensions:-
Maximum height above baseboard (including base) - 65mm
Overall length of structure (across the tracks) - 149mm
Max width of structure/base - 8mm
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - Mk1 Type A Structure Kit with 135mm Span for up to 4 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.SET E11-2 - product code 2WH0901102PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment Portal Structure Kit - Mk1 Type A Structure Kit with 135mm Span for up to 4 Tracks, including Magnetic Bases
Typical of the style fitted on the West Coast Main Line.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E11-2 - product code 2WH0901102This set E11-2 includes parts to construct one (1) Mk1 Type A structure for up to 4 Tracks (2 Masts, 2 Bases and 1 Span section).
The two Pile Driven style Bases included in the kit come with magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the Mk1 Style OHLE are available to Purchase Separately as follows:-
SET E11-5 - Mk1 Registration Arms and Catenary Wire Supports for Type A & B Structures (SET E11-5) - product code 2WH0901105
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E11-2) dimensions:-
Maximum height above baseboard (including base) - 65mm
Overall length of structure (across the tracks) - 149mm
Max width of structure/base - 8mm
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment - Registration Arms and Catenary Wire Supports for Mk1 Type A or Type B Structures
Typical of the style fitted on the West Coast Main Line.SET E11-5 - product code 2WH0901105PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment - Registration Arms and Catenary Wire Supports for Mk1 Type A or Type B Structures
Typical of the style fitted on the West Coast Main Line.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E11-5 - product code 2WH0901105
This set is specifically designed to be used with our Mk1 OHLE structure kits E11-1, E11-2, E11-11 and E11-12 (not included).This set E11-5 includes the following parts:-
- Two (2) Registration Arms
- Two (2) Catenary Wire Supports
The parts are fitted to the side of the span of your assembled Mk1 OHLE Structure and may need to be attached with a very small spot of glue.
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed N-Gauge Overhead Line Equipment - Set of 6 Return Conductor Wire Supports for Mk1 Type A or Type B Structures
Typical of the style fitted on the West Coast Main Line.SET E11-6 - product code 2WH0901106PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed N-Gauge Overhead Line Equipment - Return Conductor Wire Supports (set of 6) for Mk1 Type A or Type B Structures
Typical of the style fitted on the West Coast Main Line.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E11-6 - product code 2WH0901106
This set is specifically designed to be used with our Mk1 OHLE structure kits E11-1, E11-2, E11-11 and E11-12 (not included).This set E11-6 includes the following parts:-
- Two (2) Single Span Side Mount Return Conductor Supports
- Two (2) Double Span Side Mount Return Conductor Supports
- Two (2) Mast End Mount Return Conductor Supports
The parts are fitted to the side of the span or end of the mast of your assembled Mk1 OHLE Structure and may need to be attached with a very small spot of glue.
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type A Structure 2-Track structure,Typical of a type fitted to the West Coast Main Line route, incl. Magnetic Bases.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E16-1 - product code 4WH0901601Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type A Structure 2-Track structure, incl. Magnetic Bases, typical of a type fitted to the West Coast Main Line route.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-1 - product code 4WH0901601
This set E16-1 includes parts to construct One (1) detailed Type A Structure with Slope Top Masts that has a span to cater for up to 2 (two) tracks.
Two Mast Bases are included in the kit, with four magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.
PLEASE NOTE - the registration arms are NOT included and should be purchased separately.
Registration Arm and Catenary Wire Supports for the Type A Structure available to Purchase Separately are as follows:-
• SET E16-6 - Two Single Registration Arms and two Catenary Wire Supports (magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] - Product code 4WH0901606
All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.
Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.
The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]
OHLE Structure kit (SET E16-1) dimensions:-
• Overall height above baseboard (including bases) - 111mm
• Overall length of structure (across the tracks) - 155mm
• Nominal Span distance between inner edge of Bases - 130mm
• Overall width of structure - 14mm
• Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type B Lattice Mast Structure 2-Track structure,Typical of a type fitted to the West Coast Main Line route, including Magnetic Bases.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E16-11 - product code 4WH0901611Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type B Lattice Mast Structure 2-Track structure, including Magnetic Bases, typical of a type fitted to the West Coast Main Line route.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-11 - product code 4WH0901611
This set E16-11 includes parts to construct One (1) detailed Type B Structure with Lattice Masts that has a span to cater for up to 2 (two) tracks.
Two Mast Bases are included in the kit, with four magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.
PLEASE NOTE - the registration arms are NOT included and should be purchased separately.
Registration Arm and Catenary Wire Supports for the Type B Structure available to Purchase Separately are as follows:-
• SET E16-6 - Two Single Registration Arms and two Catenary Wire Supports (magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] - Product code 4WH0901606
All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.
Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.
The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]
OHLE Structure kit (SET E16-11) dimensions:-
• Overall height above baseboard (including bases) - 111mm
• Overall length of structure (across the tracks) - 155mm
• Nominal Span distance between inner edge of Bases - 130mm
• Overall width of structure - 14mm
• Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type B Lattice Mast Structure 4-Track structure,Typical of a type fitted to the West Coast Main Line route, including Magnetic Bases.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E16-12 - product code 4WH0901612Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type B Lattice Mast Structure 4-Track structure, including Magnetic Bases, typical of a type fitted to the West Coast Main Line route.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-12 - product code 4WH0901612
This set E16-12 includes parts to construct One (1) detailed Type B Structure with Lattice Masts that has a span to cater for up to 4 (four) tracks.
Two Mast Bases are included in the kit, with four magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.
PLEASE NOTE - the registration arms are NOT included and should be purchased separately.
Registration Arm and Catenary Wire Supports for the Type B Structure available to Purchase Separately are as follows:-
• SET E16-6 - Two Single Registration Arms and two Catenary Wire Supports (magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] - Product code 4WH0901606
All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.
Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.
The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]
OHLE Structure kit (SET E16-12) dimensions:-
• Overall height above baseboard (including bases) - 111mm
• Overall length of structure (across the tracks) - 256mm
• Nominal Span distance between inner edge of Bases - 230mm
• Overall width of structure - 14mm
• Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type B Cantilever Lattice Mast Structure for 2-Tracks,Typical of a type fitted to the West Coast Main Line route, including Magnetic Base.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E16-15 - product code 4WH0901615Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type B Cantilever Lattice Mast Structure for up to 2-Tracks, including Magnetic Base, typical of a type fitted to the West Coast Main Line route.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-15 - product code 4WH0901615
This set E16-15 includes parts to construct One (1) detailed Type B Cantilever Structure with a Lattice Mast that has a span to cater for up to 2 (two) tracks.
One Mast Base is included in the kit, with two magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.
PLEASE NOTE - the registration arms are NOT included and should be purchased separately.
Registration Arm and Catenary Wire Supports for the Type B Structure available to Purchase Separately are as follows:-
• SET E16-6 - Two Single Registration Arms and two Catenary Wire Supports (magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] - Product code 4WH0901606
All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.
Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.
The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]
OHLE Structure kit (SET E16-15) dimensions:-
• Overall height above baseboard (including bases) - 111mm
• Overall length of structure (across the tracks) - 115mm
• Overall width of structure - 14mm
• Nominal height of contact wire (if fitted to E16-6 Magnetic Registration Arms) - 78mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type A Structure 4-Track structure,Typical of a type fitted to the West Coast Main Line route, incl. Magnetic Bases.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E16-2 - product code 4WH0901602Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type A Structure 4-Track structure, incl. Magnetic Bases, typical of a type fitted to the West Coast Main Line route.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-2 - product code 4WH0901602
This set E16-2 includes parts to construct One (1) detailed Type A Structure with Slope Top Masts that has a span to cater for up to 4 (four) tracks.
Two Mast Bases are included in the kit, with four magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.
PLEASE NOTE - the registration arms are NOT included and should be purchased separately.
Registration Arm and Catenary Wire Supports for the Type A Structure available to Purchase Separately are as follows:-
• SET E16-6 - Two Single Registration Arms and two Catenary Wire Supports (magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] - Product code 4WH0901606
All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.
Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.
The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]
OHLE Structure kit (SET E16-2) dimensions:-
• Overall height above baseboard (including bases) - 111mm
• Overall length of structure (across the tracks) - 260mm
• Nominal Span distance between inner edge of Bases - 230mm
• Overall width of structure - 14mm
• Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type C Platform Structure with Tall Masts, 2-Track structure,Typical of a type fitted to the West Coast Main Line route, including Magnetic Bases.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E16-23 - product code 4WH0901623Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type C Platform Structure with Tall Masts, 2-Track structure, incl. Magnetic Bases, typical of a type fitted to the West Coast Main Line route.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E16-23 - product code 4WH0901623This set E16-23 includes parts to construct One (1) detailed Type C Platform Structure with Tall Masts that has a span to cater for up to 2 (two) tracks. Two Mast Bases are included in the kit, with four magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.Registration Arm and Catenary Wire Supports for the Type C Structure available to Purchase Separately are as follows:-• SET E16-26 - Two Single Registration Arms and two Catenary Wire Supports (magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] - Product code 4WH0901626All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]OHLE Structure kit (SET E16-23) assembled dimensions:-• Overall height above your platform (including bases) - 101mm• Overall length of structure (across the tracks) - 221mm• Nominal Span distance between inner edge of Bases - 190mm• Overall width of structure - 14mm• Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included], this is assuming a nominal 18mm Platform height.Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type C Platform Double Sided Tall Mast, for use with E16-23 platform structure kits,Typical of a type fitted to the West Coast Main Line route, including Magnetic Base.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E16-24 - product code 4WH0901624Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type C Platform Double Sided Tall Mast, including a Magnetic Base, typical of a type fitted to the West Coast Main Line route.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-24 - product code 4WH0901624
This set E16-24 includes parts to construct One (1) detailed Type C Platform Double Sided Tall Mast that is designed to fit between two E16-23 Platform Structure kits (not included), to allow spanning of multiple platforms.
One Mast Base is included in the kit, with two magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.
All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.
OHLE Structure kit (SET E16-24) assembled dimensions:-
• Overall height above your platform (including bases) - 101mm
• Overall length of mast (across the tracks) - 30mm
• Overall width of structure - 14mm
• Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included], this is assuming a nominal 18mm Platform height.
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Mk1 OHLE 2 x Combined Registration Arms / Catenary Wire Supports (magnetic type) for fitting to Mk1 Type C structure kits.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E16-26 - product code 4WH0901626Detailed Overhead Line Equipment Mk1 OHLE 2 x Combined Type C Registration Arms / Catenary Wire Supports (magnetic type) for fitting to our Mk1 Type C structure kits.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-26 - product code 4WH0901626
This set E16-26 includes parts designed specifically to fit to our Mk1 Type C OHLE kits E16-21, E16-22 and E16-23 (not included).
The Registration Arms / Catenary Wire Supports may be fitted either way round underneath the OHLE structure span.
The kit consists of:-
- Two (2) Combined Registration Arms & Catenary Wire Supports, under-span mount (magnetic type)
- Six (6) Magnets (4 + 2 spare) for fitting into the registration arms and catenary wire supports which will allow fitting of Peco type OHL wires. Note - the Peco wires are not included.
All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type D Low Mast Structure 2-Track structure,Typical of a type fitted to the West Coast Main Line route, including Magnetic Bases.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E16-31 - product code 4WH0901631Detailed Overhead Line Equipment Structure Kit – Mk1 25kV Type D Low Mast Structure 2-Track structure, including Magnetic Bases, typical of a type fitted to the West Coast Main Line route.
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E16-31 - product code 4WH0901631
This set E16-31 includes parts to construct One (1) detailed Type D Structure with Low Height Masts that has a span to cater for up to 2 (two) tracks.
The slightly lower height structure typical of the southern section of the West Coast Main Line allows the fitting of the catenary wire supports above the structure.
Two Mast Bases are included in the kit, with four magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.
PLEASE NOTE - the registration arms are NOT included and should be purchased separately.
Registration Arm and Catenary Wire Supports for the Type D Structure available to Purchase Separately are as follows:-
• SET E16-36 - Two Single Registration Arms and two Catenary Wire Supports (magnetic type to allow fitting of Peco type OHL wires) note [wires are not included] - Product code 4WH0901636
All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.
Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.
The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]
OHLE Structure kit (SET E16-31) dimensions:-
• Overall height above baseboard (including bases) - 100mm
• Overall length of structure (across the tracks) - 155mm
• Nominal Span distance between inner edge of Bases - 130mm
• Overall width of structure - 14mm
• Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
