Lineside (OO)
-
Palisade Fencing - Gates Pack of 4 (2 large - 2 small) - OO Gauge
Palisade Fencing - Gates Sections x 4 pieces (2 each of large gates and small gates)OO GaugePalisade Fencing - Gates Sections x 4 pieces as follows:-- 2 x Large double gates (each 7.5cm long)- 2 x small single gates (each 1.9cm long)The Palisade Fencing is approx. 2.8cm high above the baseboard, and has 1mm diameter locating pegs at the bottom for inserting into baseboard holes.OO GaugeSupplied unpainted
£3.95
-
Palisade Fencing - Incline Section Pack of 8 (incl. 22deg and 45deg) - OO Gauge
Palisade Fencing - Angled Sections x 8 pieces (4 each of 22degree and 45degree angled pieces)OO GaugePalisade Fencing - Angled 2-Panel Sections x 8 pieces as follows:-- 2 x 22 degree angled pieces (approx. 6.3cm long)- 2 x 22 degree angled pieces with 15mm straight fence piece (approx. 7.4cm long)- 2 x 45 degree angled pieces (approx. 5.4cm long)- 2 x 45 degree angled pieces with 15mm straight fence piece (approx.6.6cm long)The Palisade Fencing is approx. 2.8cm high above the baseboard, and has 1mm diameter locating pegs at the bottom for inserting into baseboard holes.OO GaugeSupplied unpainted
£6.95
-
APC (Auto Power Control) Magnet Boxes - OO Gauge (Pack of 8) - SET E5-7
Add some detail to your OHLE fitted trackwork with these APC (Auto Power Control) magnet boxes.OO GaugePack of 8 (unpainted) - SET E5-7.This pack includes 8 APC Magnet Boxes (unpainted) - SET E5-7 Overhead Electrified lines are split into electrically separate sections (often up to 30 miles long) separated by Neutral Sections. APC (Auto Power Control) magnets are used to ensure the power draw from a train is switched off when passing through the Neutral Section to prevent overhead line damage. APC magnets are normally mounted to the sleeper ends on both sides of the running line 30 metres before and 10 metres after a Neutral Section as follows- Each overhead wire neutral section can be up to 45metres (approx. 2 x Mk3 Coach lengths) long and is split up into the following sections,• firstly there is a 30 metre run-in, this is from the first set of APC magnets to the insulated part of the Neutral Section, • secondly there is a Dead Section (up to 5 metres long), which includes ceramic insulators then a dead section then more ceramic insulators, • lastly there is a 10 metre run off, this is from the end of the insulated section to the second set of APC magnets.An optional extra to go with your APC magnets is our Neutral Section trackside signs which can be found here (Product 4WH0603701).SET E5-7 - Supplied unpainted; a light coat of primer is recommended before painting / weathering to suit your lineside. They are often yellow to make them easily distinguishable for track workers.Note that this product represents the APC magnet boxes, they are not actually magnetic!
£3.95
-
Long Welded Rail (LWR) Expansion Joint - OO Gauge for Code 75 rail (Pack of 2) SET E5-9a
Add some detail to your trackwork with these long welded rail expansion joints. Pack of 2.Suitable for Peco Streamline Code 75 rail.On the real railway these expansion joints are used between sections of continuously welded rail.These OO Gauge models are designed to suit Peco Streamline Code 75 rail.Pack of 2 expansion jointsSupplied unpainted; a light coat of primer is recommended before painting / weathering to suit your lineside. These parts are designed to fit to the Code 75 rail following removal of four Peco moulded sleepers; ensure there are no burrs on the rail ends, slide the rails into the expansion joints, then replace the sleepers on the other side to create a continuous rail across the track feature.
£5.95
-
Concrete Cable Trough Trunking Angle Pack - OO Gauge (Pack Of 16)
Concrete Cable Trough Trunking is an integral component of modern railway infrastructure, contributing to the efficiency, safety, and reliability of train operations by providing a robust and organized solution for cable management and distribution.Concrete Cable Trough Trunking Angle Pack - OO Gauge (Pack Of 16)Pack Includes 16 Interlocking LengthsPack Contains:4 - 45° Straight Angle Sections (2 x Left, 2 x Right)4 - 45° Large Radius Curved Angle Sections (2 x Left, 2 x Right)4 - 90° Large Radius Curved Angle Sections (2 x Left, 2 x Right)4 - 90° Small Radius Curved Angle Sections (2 x Left, 2 x Right) See Our Other Concrete Cable Trough Trunking Packs Available:Cable Trough Trunking Angle Pack - Part No: 063301a (This Pack)Cable Trough Trunking Junction Pack - Part No:063301bCable Trough Trunking Open Trough Pack - Part No: 063301cCable Trough Trunking Raised Pack - Part No: 063301dCable Trough Trunking Straight Pack - Part No: 063301eCable Trough Trunking Mega Pack - Part No: 063301gAbout Concrete Cable Trough Trunking: Railway concrete trough trunking is utilized extensively throughout the network for various purposes: Cable Management: One primary use is for organizing and protecting cables that run alongside or underneath railway tracks. The trough trunking provides a secure pathway for cables, preventing damage from environmental factors and ensuring efficient cable management. Electrical Distribution: It serves as a conduit for electrical wires, allowing for the safe and reliable distribution of power to various railway components such as signals, lighting systems, communication devices, and other infrastructure along the tracks. Safety Enhancement: Concrete trough trunking enhances safety by minimizing the risk of cable exposure, which could otherwise pose hazards to railway personnel, passengers, and maintenance workers. By securely enclosing the cables, it reduces the likelihood of accidental contact or tripping. Durability and Longevity: Concrete trough trunking is known for its durability and ability to withstand heavy loads, extreme weather conditions, and wear and tear over time. This ensures the longevity of the railway infrastructure, minimizing the need for frequent repairs or replacements. Maintenance Access: While providing robust protection for cables, the trunking also allows for relatively easy access during maintenance and repair operations. Removable lids or access points facilitate inspection, troubleshooting, and necessary adjustments without disrupting railway operations extensively. Integration with Signalling Systems: Railway concrete trough trunking plays a crucial role in supporting signalling systems along the tracks. It accommodates cables necessary for transmitting signals that control train movements, ensuring smooth and safe operations throughout the network. Supplied In Grey Paint If Desired To Choice Of Concrete Colour
£5.95
-
Slateford Carriage Siding Maintenance Platform Kit (248cm) Mega Pack - OO Gauge
Slateford Carriage Siding Maintenance Platform Kit (62cm) Mega Pack - OO GaugeCreate Your Own Carriage Sidings With These Maintenance & Cleaning Platform Kit, This Is Modelled From Slateford Carriage Sidings Near EdinburghPack Includes:1 x Slateford Carriage Siding Maintenance Platform Kit (62cm) Including Steps - OO GaugeContaining:1 x Self Adhesive Wrap Around Pre-Cut Sticker Sheet For Platform Tops (2 Stickers)2 x Platform Tops 310mm Long x 28mm Wide14 x White Concrete Platform Supports2 x Platform Steps3 x Slateford Carriage Siding Maintenance Platform Kit (62cm) - Extension Pack - OO GaugeContaining:3 x Self Adhesive Wrap Around Pre-Cut Sticker Sheet For Platform Tops (6 Stickers)6 x Platform Tops 310mm Long x 28mm Wide42 x White Concrete Platform SupportsThis Mega Pack Give You A Total Length Of: 248cm!Customise to your preference with length and additional length packs (62cm) without steps also available in our store.
£44.95
-
Slateford Carriage Siding Maintenance Platform Kit (62cm) - Extension Pack - OO Gauge
Slateford Carriage Siding Maintenance Platform Kit (62cm) - Extension PackExtend Our Modern Slateford Carriage Sidings With These Maintenance & Cleaning Platform Kit, This Is Modelled From Slateford Carriage Sidings Near EdinburghPack Includes:1 x Self Adhesive Wrap Around Pre-Cut Sticker Sheet For Platform Tops (2 Stickers) 2 x Platform Tops 310mm Long x 28mm Wide 14 x White Concrete Platform Supports (unpainted)
£9.95
-
Slateford Carriage Siding Maintenance Platform Kit (62cm) Including Steps - OO Gauge
Slateford Carriage Siding Platform Kit (62cm) & 2 Sets Of StepsCreate Your Own Carriage Sidings With These Maintenance & Cleaning Platform Kit, This Is Modelled From Slateford Carriage Sidings Near EdinburghPack Includes:1 x Self Adhesive Wrap Around Pre-Cut Sticker Sheet For Platform Tops (2 Stickers) 2 x Platform Tops 310mm Long x 28mm Wide 14 x White Concrete Platform Supports (unpainted) 2 x Pre Painted Platform StepsCustomise to your preference with length and additional length packs (62cm) without steps also available in our store.
£17.95
-
Coasting, Neutral Section and Raise/Lower Pantograph Signs - (Pack Of 10) - OO Gauge
Neutral Section, Coasting and Raise/Lower Pantograph Signs - (Pack Of 10) - OO GaugeSelf Adhesive Pre Cut Stickers Contain:2 x Warning Of Traction Change Over2 x Warning Of Neutral Section4 x Lower Pantograph4 x Raise Pantograph2 x Do No Raise Pantograph2 x Advance Lower Pantograph Warning2 x Start Of Neutral Section2 x End Of Neutral Section White Plastic Boards & Posts Included in Pack That Simply Clip Together, Affix To Your Baseboard Using a 2mm Drill Hole RecommendedNo Painting Required.Signs Include Pre-cut Self Adhesive StickersNeutral Section, Coasting and Raise/Lower Pantograph Signs - (Pack Of 10) - OO Gauge Self Adhesive Pre Cut Stickers Contain:2 x Warning Of Traction Change Over2 x Warning Of Neutral Section4 x Lower Pantograph4 x Raise Pantograph2 x Do No Raise Pantograph2 x Advance Lower Pantograph Warning2 x Start Of Neutral Section2 x End Of Neutral Section White Plastic Boards & Posts Included in Pack That Simply Clip Together, Affix To Your Baseboard Using a 2mm Drill Hole RecommendedNo Painting Required. Signs Include Pre-cut Self Adhesive Stickers What Are Raise And Lowering Pantographs Signs Used For? Railway pantograph raise lower signs are signs that are used to indicate to train operators when they should raise or lower the pantograph on their electric locomotive or train. The pantograph is an apparatus that collects electric power from overhead lines and transfers it to the train's electric motor. These signs are typically used in areas where overhead lines are present, such as electrified railway tracks, and where there are sections of the track where the overhead lines are not energized. The signs indicate to the train operator when to raise or lower the pantograph so that it does not come into contact with the overhead lines that are not energized. The signs can be in the form of a pictogram or text, and are usually placed at a sufficient distance before the section of track where the pantograph needs to be raised or lowered. Train operators must be vigilant in observing and obeying these signs to avoid damage to the pantograph and overhead lines, and to ensure the safety of the train and its passengers. What Are Railway Coasting Signs? Railway coasting signs are signs that are placed along railway tracks to inform train operators that they should coast, or reduce their speed and coast, without using the locomotive's power. These signs are typically used when approaching areas where it is important to reduce noise, such as near residential areas or wildlife habitats, or where it is necessary to conserve fuel or reduce wear on the locomotive. It is important for train operators to obey coasting signs as failing to do so can result in excessive noise, damage to the locomotive, and potential safety hazards.
£5.29
-
Loading Gauge - OO Gauge (Pack Of 2)
Pack of 2 Lineside Loading GaugesOO GaugeRailway Loading Gauges are used to ensure that the clearance between the top of a railway vehicle including its load, and any overhead structures, such as bridges, tunnels, or power lines, is sufficient to prevent collisions or damage to the vehicle, its load or the infrastructure.Loading Gauges are commonly used in railway yards, maintenance and loading facilities. Pack of 2 - OO GaugeEach Loading Gauge is a 2 part kit, simply de-sprue and slot the post into the base.
£3.95
-
Lamp Huts - OO Gauge (2 Types in a Pack of 4)
Lineside Lamps Huts, corrugated metal type and wooden smaller type. OO GaugePack of 4, including 2 of each type of hut.Lineside Lamp Huts, seen all over the railway network; often in yards, depots or carriage sidings where there was a need to prepare and re-fill oil type lamps ready to be used on departing trains.Pack of 4 huts-- 2 larger metal type- 2 smaller wooden styleSupplied unpainted, a coat of primer is recommended before painting to suit your layout.
£5.95
-
Telegraph Poles - Large Type - OO Gauge ( Pack of 8)
Telegraph Poles. Large Type (3 Styles).OO Gauge. Pack of 8Telegraph PolesOO GaugeLarger Type - Pack of 8-- 3 poles with 12 rows of insulators (140mm)- 3 poles with 7 rows on insulators (128mm)- 2 poles with 6 row of insulators (120mm)Supplied un-painted
£5.29
-
Telegraph Poles - Small Type - OO Gauge ( Pack of 10)
Telegraph Poles. Small Type (3 styles). OO Gauge. Pack of 10Telegraph PolesOO GaugeSmaller Type - Pack of 10-- 5 poles with 4 rows of insulators (110mm)- 3 poles with 2 rows on insulators (110mm)- 2 poles with 1 row of insulators (95mm)Supplied un-painted
£5.29
-
Mechanical Point Lock/Tie Covers - OO Gauge (Pack of 10)
Mechanical Point Lock/Tie Covers - for Code 100 Track. OO Gauge. Pack of 10.Mechanical Point Lock/Tie Covers OO Gauge Pack of 10 - for Code 100 TrackSeen Across The Country From 1800's - Present Day On Mainline's/Depots/ StationsProtective Point Tie Covers, Supplied Pre-Coloured In BrownMade From Durable Plastic MaterialTo Fit Peco Code 100 TrackPack of 10: 5 Long / 5 Short
£3.95
-
Mile posts - BR / Network Rail style - OO Gauge (Pack of 24)
Add a bit of detail to your lineside. with Mile marker posts - British Rail / Network Rail style. OO Gauge. Pack of 24.Mile posts - British Rail / Network Rail style - Pack of 24Two-sets of mile posts (2 x 12 mile posts), each set covers a '3-mile' section of linesideOO GaugeEach set contains- 3 x Full mile posts - consecutively numbered- 3 x quarter mile posts- 3 x half mile posts- 3 x three-quarter mile postsYou may like to pick-out the numbering on each mile post in black**** TOP - TIP, use a Ball-Point GEL pen to pick out the raised numbers on Mileposts and Gradient sign posts ****Mile marker posts were introduced to in the UK from 1845 in the form of posts at quarter-mile intervals along the line-side. These are primarily as reference points that can be used to specify a position on the infrastructure, for example when reporting an incident or in connection with engineering work.Each railway company developed their own style of mileposts, and today many of these different designs still exist on the trackside, although where Railtrack or Network Rail have replaced missing or damaged marker posts in recent years a standard simplified design has been used.For over a century most mile posts were mostly painted white with black numbers, however from 1963 mile posts were generally painted yellow. In this set the mile post numbers represent the following:-46, 46¼, 46½, 46¾, 47, 47¼, 47½, 47¾, 48, 48¼, 48½, 48¾. 5, 5¼, 5½, 5¾, 6, 6¼, 6½, 6¾, 7, 7¼, 7½, 7¾. Please note these items are supplied unpainted, a light coat of primer is recommended first before painting to suit your layout.
£6.29
-
Mile posts - Great Western Railway (GWR) style- OO Gauge (Pack of 24)
Add a bit of detail to your lineside. with Mile marker posts - Great Western Railway (GWR) style. OO Gauge. Pack of 24.Mile posts - Great Western Railway (GWR) style - Pack of 24Two-sets of mile posts (2 x 12 mile posts), each set covers a '3-mile' section of linesideEach set contains- 3 x Full mile posts - consecutively numbered- 3 x quarter mile posts- 3 x half mile posts- 3 x three-quarter mile postsYou may like to pick-out the numbering on each mile post in black**** TOP - TIP, use a Ball-Point GEL pen to pick out the raised numbers on Mileposts and Gradient sign posts ****Mile marker posts were introduced to in the UK from 1845 in the form of posts at quarter-mile intervals along the line-side. These are primarily as reference points that can be used to specify a position on the infrastructure, for example when reporting an incident or in connection with engineering work.Each railway company developed their own style of mileposts, and today many of these different designs still exist on the trackside, although where Railtrack or Network Rail have replaced missing or damaged marker posts in recent years a standard simplified design has been used.For over a century most mile posts were mostly painted white with black numbers, however from 1963 mile posts were generally painted yellow. In this set the mile post numbers represent the following:-23, 23¼, 23½, 23¾, 24, 24¼, 24½, 24¾, 25, 25¼, 25½, 25¾. 7, 7¼, 7½, 7¾, 8, 8¼, 8½, 8¾, 9, 9¼, 9½, 9¾. Please note these items are supplied unpainted, a light coat of primer is recommended first before painting to suit your layout.
£6.29
-
Mile posts - London Midland and Scottish Railway (LMS) style - OO Gauge (Pack of 24)
Add a bit of detail to your lineside. with Mile marker posts - London Midland and Scottish Railway (LMS) style. OO Gauge. Pack of 24.Mile posts - London Midland and Scottish Railway (LMS) style - Pack of 24Two-sets of mile posts (2 x 12 mile posts), each set covers a '3-mile' section of linesideEach set contains- 3 x Full mile posts - consecutively numbered- 3 x quarter mile posts- 3 x half mile posts- 3 x three-quarter mile postsYou may like to pick-out the numbering on each mile post in black**** TOP - TIP, use a Ball-Point GEL pen to pick out the raised numbers on Mileposts and Gradient sign posts ****Mile marker posts were introduced to in the UK from 1845 in the form of posts at quarter-mile intervals along the line-side. These are primarily as reference points that can be used to specify a position on the infrastructure, for example when reporting an incident or in connection with engineering work.Each railway company developed their own style of mileposts, and today many of these different designs still exist on the trackside, although where Railtrack or Network Rail have replaced missing or damaged marker posts in recent years a standard simplified design has been used.For over a century most mile posts were mostly painted white with black numbers, however from 1963 mile posts were generally painted yellow. In this set the mile post numbers are as follows:-0, 0¼, 0½, 0¾, 1, 1¼, 1½, 1¾, 2, 2¼, 2½, 2¾. 55, 55¼, 55½, 55¾, 56, 56¼, 56½, 56¾, 57, 57¼, 57½, 57¾. Please note these items are supplied unpainted, a light coat of primer is recommended first before painting to suit your layout.
£6.29
-
White Wooden Lineside Fencing OO Gauge (Pack of 3 sections)
White Wooden Lineside Fencing. OO Gauge. Pack of 3. Total 288mm in length White Wooden Lineside Fencing OO GaugePack of 3 (three) sections of fencingEach section of fencing is 9.6cm in lengthTotal 288mmIn white, but you may wish to paint or weather to suit your lineside, depot or workshop sceneEnamel paints are recommended
£3.49
-
GRC Cable Trunking Ground Level Straight Sections - OO Gauge (Pack of 4)
GRC Cable Trunking Ground Level Straight sections. OO Gauge. Pack of 4.GRC Cable Trunking parts4 Ground Level Straight sections.OO GaugeThese cable trunking parts are designed to be used with our other GRC Cable Trunking raised straight, raise/lower and angle sections.Unpainted, ready to paint to suit your lineside scene.Enamel paints are recommended.
£3.95
-
GRC Cable Trunking Raised Straight Sections - OO Gauge (Pack of 4)
GRC Cable Trunking Raised Straight sections. OO Gauge. Pack of 4.GRC Cable Trunking parts4 Raised Straight sectionsOO GaugeThese cable trunking parts are designed to be used with our other GRC Cable Trunking ground level straight, raise/lower and angle sections.Unpainted, ready to paint to suit your lineside scene.Enamel paints are recommended.
£4.49
-
GRC Cable Trunking Raise/Lower Sections - OO Gauge (Pair LH/RH)
GRC Cable Trunking Raise/Lower sections. OO Gauge. 1 Pair (LH/RH).GRC Cable Trunking parts1 Pair of Raise/Lower sections of trunking, 1 LH and 1 RH.OO GaugeThese cable trunking parts are designed to be used with our other GRC Cable Trunking ground level straight, angle and raised sections.Unpainted, ready to paint to suit your lineside scene.Enamel paints are recommended.
£2.79
-
GRC Cable Trunking Angle Sections - OO Gauge (Pack of 4)
GRC Cable Trunking Angled sections. OO Gauge. Pack of 4.GRC Cable Trunking parts4 Angled sections of trunkingOO GaugeThese cable trunking parts are designed to be used with our other GRC Cable Trunking ground level straight, raise/lower and raised sections.Unpainted, ready to paint to suit your lineside scene.Enamel paints are recommended.
£2.79
-
Bridge Girder Centre Supports - OO Gauge (Pack of 2)
Bridge Girder SupportsOO GaugePack of 2Bridge Girder SupportsBridges for 2 tracks or more would of often had centre supports that were visible above the track bed, seen throughout England, Scotland and Wales on bridges passing over roads, footpaths and other railway lines; why not make your steel girder bridge more realistic.OO GaugePack of 2Dimensions:Length 100mmWidth 7.1mmHeight 10.2mm
£5.49
-
Lineside Gradient Sign Posts - OO Gauge (Pack of 8)
Add a bit of detail to your lineside with Gradient sign posts.Supplied in a packs of 8 sign posts with a variety of gradients.OO GaugeGradient sign postsSupplied in a packs of 8 sign posts with a variety of gradients OO GaugeThe numbering on each post is slightly raised to allow it to be picked-out in black on each sign post.Gradients on the railway are rarely constant over any considerable length, and may change several times within the space of a mile.Gradient signs were first used around 1850 with a sign placed at each location where the gradient of the line changes. Most gradient sign posts located on the lineside have two arms facing the track, one on either side of a post. The arms slant up or down to indicate the direction of the gradient, and have the gradient marked on them.The gradient is expressed as a ratio, e.g. "1 in 200" (or "1:200")that means that the track rises (or drops) one unit for every 200 units travelled horizontally.1 in 200 is therefore a steeper gradient than 1 in 500.Some designs of gradient sign post do not show the first part of the ratio so 1 in 200 is shown merely as “200”.In general gradient sign posts are painted white with black lettering, however from the 1970s onwards some are painted yellow.
£4.79
You have seen 72 out of 72 products