Description
Pipes and multiple working jumper cables for both ends of one Class 56 locomotive.
Add some extra detail to your locomotives or replace missing accessory buffer beam details (please read the full Product Description).
OO Gauge (supplied unpainted)
This set of brake pipes is enough for both ends of one Class 56 Locomotive, the UNPAINTED pack includes:-
2 - Air Brake Pipes (BP) - Red
4 - Main Reservoir Air Pipes (MRP) - Yellow
4 - Regulating Control Air Pipes (CA) - White
2 - Multiple Working Jumper Cables (M/W) - Orange
2 - Multiple Working Jumper Receptacles (M/W) - Orange
Notes:-
- There may be variations between members of the Class 56 fleet in pipe configurations, fitting and placement; therefore it is recommended to refer to photographs of the real thing when fitting these parts.
- All pipes & cables have a 0.7mm peg that can be fitted into a drilled hole in the buffer beam / cab front, alternatively the pegs can be cut-off and the parts attached with a small amount of adhesive.
- These parts are delicate and may not be suitable for use with couplings fitted, especially on tighter radius curves.
- The pipes are supplied unpainted, please refer to pictures for typical colours.
- Top-Tip - use a light coat of white primer first, and paint the pipes before removing them from the sprue.
- The dummy screw coupling shown in the pictures is not included, these are available separately here.
(SET Number 8 for Class 56)
