Description
Detailed Brake, Steam Heating Pipes and ETH Cables for both ends of one Class 55 Deltic locomotive.
Add some extra detail to your locomotives or replace missing accessory buffer beam details (please read the full Product Description).
OO Gauge (supplied unpainted)
This set of brake, steam heat pipes and ETH cables is enough for both ends of one Class 55 Deltic Locomotive, the UNPAINTED pack includes:-
2 - Vacuum Hoses with hose dummy bracket (VAC)
2 - Air Brake Pipes (BP)
4 - Main Reservoir Air Pipes (MRP)
4 - MRP Mounting Pieces (to fit under buffer beam)
2 - Steam Heat Pipes (S/H)
2 - ETH (Electric Train Heating) Jumper Cables
2 - ETH (Electric Train Heating) Receptacles
2 - Coupling Protection Frames (to fit under buffer beam)
2 - Dummy Screw Couplings / Coupling Hooks
Notes:-
- There may have been variations between members of the Class 55 fleet in pipe configurations, fitting and placement; therefore it is recommended to refer to photographs of the real thing when fitting these parts.
- All pipes have a 0.7mm peg that can be fitted into a drilled hole in the buffer beam, alternatively the peg can be cut-off and the pipe attached with a small amount of adhesive.
- These parts are delicate and may not be suitable for use with couplings fitted, especially on tighter radius curves.
- The pipes are supplied unpainted, please refer to pictures for typical colours.
- Top-Tip - use a light coat of white primer first, and paint the pipes before removing them from the sprue.
(SET Number 40 for Class 55 Deltic)