Workshop & Depot (OO)
-
Yellow Key Clamp Railing Mega Pack - OO Gauge
Key Clamp Railing Mega Pack - OO Gauge Pack Contains:3 Packs - Straight Key Clamp Railings Over 180cm In Length!2 Packs - 8 End Pieces With Curved Barriers1 Pack - 15 Key Clamp Safety Railing Short Sections
£18.95
-
Workshop Lockers - OO Gauge (Pack of 4)
Workshop Lockers are found in most workshops. Each of the 4 locker units has 12 lockers.OO Gauge.Workshop Locker UnitsPack of 4Great Addition For Any Workshop, Depot or Office1 With a Door Open and a Door Missing2 With a Part Open Door1 With Closed DoorsOO GaugeSupplied Unpainted, Paint And Weather To Your Preference
£4.95
-
Locomotive Stands - OO Gauge (Pack of 4)
Locomotive StandsTypical of those used to support a locomotive during manufacture, overhaul or whilst undergoing bogie maintenance / exchange.Pack of 4 stands (2 types, 2 of each type)OO GaugeLocomotive Stands - 2 Types (Pack of 4)Often Seen Around Depot's & Workshops Or Even Outside Them.These are used to support a locomotive during manufacture, overhaul or whilst undergoing bogie maintenance / exchangeOO GaugePack includes:- Four (4) Locomotive Stands of 2 Different Types (1 Pair of Each)Supplied unpainted, a light coat of primer is recommended before painting as desired to suit your layout.
£7.95
-
Class 47 / Brush Type 4 Detailed Power Unit - OO Gauge
Superbly detailed model of a Class 47 power unit. OO GaugeClass 47 / Brush Type 4 Detailed Power Unit (one)OO GaugePack includes:- one Class 47 power unitClass 47 locomotives are fitted with a Sulzer 12LDA28-C power unit originally rated at 2,700bhp, but later de-rated to 2,580bhp.This detailed model of a Class 47 power unit is intended to be used in depot/workshop or scrapyard scenes on your layout.This model is supplied unpainted, on the print sprue, and will need to be carefully removed by using fine Sprue Cutters. Once removed from the sprue a light coat of primer is recommended before painting as desired to suit your layout.Optional extra for OO Gauge:- Lifting Beam & Wire Lifting Cables, please check our Workshop & Depot Category
£11.95
-
Water Standpipes - OO Gauge (Pack of 4)
Pack of 4 Water Standpipes, includes Rubber HosesOO GaugePack of 4 Water Standpipes, includes Rubber HosesOO GaugeUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended
£4.29
-
Cable Drums on Stands - OO Gauge (Pack of 3)
Pack of 3 Cable Drums on Stands for your Workshop or DepotOO GaugePack of 3 Cable Drums on StandsOO GaugePack includes:-1 -Large Cable Drum wound with Cable mounted on a Stand1 -Large Empty Cable Drum mounted on a Stand1 -Small Cable Drum wound with Cable mounted on a Trestle StandUnpainted, ready to paint to suit your depot or workshop scene
£5.49
-
Step Ladders - OO Gauge (Pack of 3)
Pack of 3 sets of step ladders for your workshop / depot or platform scene.Step ladders Supplied unpainted.
£4.29
-
Workshop Stillages - OO Gauge (Pack of 5)
Workshop Stillages Pack of 52 Full Sided Stillages2 Full Sided Mesh Stillages1 Mesh Open Sided Mesh Stillage Supplied Unpainted, Paint To Suit
£5.49
-
Diesel Servicing Point Kit - OO Gauge (without hardstanding)
Detailed Kit for a Single Track Diesel Servicing Point - OO Gauge. This is an unpainted Kit containing over 60 parts; Baseplate is approx. 30.5cm in length.This is a Detailed Kit for a Single Track Diesel Servicing Point in OO Gauge. The Kit contains over 60 parts including an MDF baseplate measuring approx. 30.5cm in length that has laser-cut grids and locating holes for the servicing point parts. The baseplate of the servicing point is designed to sit on top of your baseboard alongside your track. All parts are supplied unpainted and will need to be painted and assembled, full instructions are provided with each kit. The overall height of the Servicing Point Canopy is approx. 6.4cm. Rails, Glue and Paints are NOT included. Why not add some lighting to your Servicing Point with our Batten Lighting Kit - 4WH0500201
£33.95
-
Small Locomotive/Carriage Inspection Platforms - OO Gauge (Pack of 2)
Small Inspection Platforms for your depot. OO Gauge. Pack of 2 platforms (1 LH, 1 RH)Small Locomotive Inspection PlatformsPack of 2 platforms- 1 Left Hand Steps- 1 Right Hand StepsOO GaugeUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended
£5.95
-
GRP Depot Inspection Platform - OO Gauge
GRP Metal Girder Inspection Access Platform For Locomotives / CarriagesOO GaugeOptions - (please select from the menu above)- Steps on the Left Hand Side (LH)- Steps on the Right Hand Side (RH)- Twin Pack one LH and one RHFor Use internal & External To Depot's.Each GRP Platform is 14.6cm In Length, 2.01cm Wide, 3.07cm HighSupplied Unpainted, Use Primer Before Paint Application
£12.95 - £23.95
-
Pallets With Workshop Equipment - OO Gauge (Pack of 6)
Pallets loaded with Detailed Workshop EquipmentOO GaugePack of 6Pallets loaded with typical Workshop EquipmentPack of 6 OO GaugeIncludes:-1 - Pallet with 4 coolant containers1 - Pallet with a step ladder, toolbox and grinder1 - Pallet with a tool tray and spanners 1 - Pallet with 2 rubbish sacks, toolbox, saw, bolt cutters and screwdriver1 - Pallet with a metal bin and 4 buckets1 - Pallet with two paint tins, saw, pliers, bolt cutters, and assorted small pots & boxesSupplied Unpainted
£6.79
-
Vacuum Brake Test Trolley - OO Gauge (Pack of 2)
Depot/Workshop Vacuum Brake Test TrolleyOO GaugePack of 2Air Brake Test Trolley - OO Gauge - Pack of 2A Vacuum Test Rig is used after maintenance of the vacuum braking system on wagons and coaches to confirm the operation is in accordance with design and set-up criteria. The Vacuum Test Rig is powered by a workshop 415vAC, 3-phase power supply, and is fitted with a control valve to allow control the brakes as if the wagon or coach were coupled to a locomotive. The Vacuum Test Rig is positioned close to the end of the wagon or coach and connected using a standard vacuum brake pipe; a vacuum gauge is fitted on the front of the Test Rig show the level of vacuum in the train pipe. It is important for wagons and coaches to all brake evenly and consistently, therefore Vacuum Test Rig is used to enable measurements of leakage rates and the brake force build up and release times to be recorded. During each brake application and release operation the time it takes for the brake cylinder to apply on the wagon or coach is measured using a stopwatch. When not in-use the Vacuum Test Rig is parked away neatly in the corner of the workshop. Pack Contains- 2 Vacuum Brake Test TrolleysComes UnpaintedPaint To Desired ColoursPrimer Recommended
£4.29
-
Danny and his Dumper Truck - OO Gauge
Dumper Truck and his Driver, 'Danny'. OO Gauge.Diesel Dumper Truck & DriverOO GaugePack includes-1 - Dumper Truck1 - DriverGreat Addition for any 1960s Onward LayoutSupplied Unpainted
£6.49
-
Depot and Workshop Rail Stop Boards - OO Gauge (Pack of 6)
Depot and workshop Stop Boards with sticker sheet. OO Gauge. Pack of 6 Depot and workshop Stop Boards These stop-boards can be used on the line approaching the depot or workshop doors as part of a depot protection system. OO GaugePack of 6 Unpainted, ready for painting to suit your depot installation.Enamel paints are recommended.Includes Self Adhesive Sticker sheetNote the Stop Board stickers need to be individually cut out before applying
£5.49
-
Class 37 Engine Parts, including Engine Block, Generator and 10 Pallets with parts - OO Gauge
Superbly detailed engine parts from a Class 37 locomotive. Pack includes a dismantled engine block, generator unit and various parts such as cylinder heads, pistons and turbochargers on 10 wooden pallets.OO GaugeSuperbly detailed engine parts from a Class 37. Pack includes a dismantled engine block, generator unit and various parts such as cylinder heads, pistons and turbochargers on 10 wooden pallets.OO GaugePack includes:- 1 - Engine block sat on wooden blocks in a dismantled state with cylinder heads and pistons removed,1 - Generator Unit sat on wooden blocks,10 Pallets with the following dismantled engine parts on them:-- Turbochargers, auxiliary generator, cylinder heads, pistons, cylinder liners, connecting rod parts, heat exchanger and oil pipework. Depicting parts from a dismantled Class 37 locomotives EE 12CSVT power unit.These detailed parts are intended to be used in depot/workshop or scrapyard scenes on your layout.Supplied unpainted, a light coat of primer is recommended before painting as desired to suit your layout.
£15.95
-
Workshop Tool Chest - OO Gauge
Workshop Tool Chest. OO Gauge. Open Drawers & DoorWorkshop Tool Chest - One OO GaugeDoes NOT include the Figure.Supplied unpainted; it is recommended use a light coat of primer before painting red. You may wish to pick out the front edge of the Tool Chest drawers and door handles in black as shown in the picture
£3.49
-
Diesel Servicing Point Kit - OO Gauge with hardstanding for Code 100/75 or Bullhead Rail
Detailed Kit for a Single Track Diesel Servicing Point - OO Gauge. This kit has a hardstanding for either Code 100, Code 75 or Bullhead rails (please select from the menu above). This is an unpainted Kit containing over 90 parts; Baseplate is approx. 30.5cm x 8.4cm. his kit has a hardstanding for either Code 100, Code 75 or Bullhead rails (please select from the menu above). The Kit contains over 90 parts including an MDF baseplate measuring approx. 30.5cm x 8.4cm. that has laser-cut grids and locating holes for the servicing point parts and the rail chairs (provided). The baseplate of the servicing point is designed to sit on top of your baseboard and is the same thickness as the sleepers of your Code 100, Code 75 or Bullhead Rail track. All parts are supplied unpainted and will need to be painted and assembled, full instructions are provided with each kit. The overall height of the Servicing Point Canopy is approx. 6.4cm. Rails, Glue and Paints are NOT included. Why not add some lighting to your Servicing Point with our Batten Lighting Kit - 4WH0500201
£37.95
-
Class 37 Detailed Static Bogie - OO Gauge (Cast Frame Type)
This is a detailed static model of a Class 37 Locomotive Bogie.OO GaugeA detailed static Class 37 Bogie (one)Class 37 locomotives are fitted with 3 axle bogies of 13ft 6in wheelbase, with two stage suspension, three EE538 traction motors and integral air braking equipment.This detailed static model of a Class 37 locomotive bogie represents the cast frame type and is intended to be used in depot/workshop or scrapyard scenes on your layout.OO GaugePack includes:- one Class 37 bogie, supplied unpainted. A light coat of primer is recommended before painting as desired to suit your layout.
£9.95
-
Johnny & His Generators (OO Gauge)
Johnny Filling Up His Generator with Fuel, includes 2 Additional Generators. OO GaugeJohnny & His Generators OO GaugeGreat For Any Garage/Workshop SceneIncludes Johnny Filling Up His Generator With Fuel and 2 Additional GeneratorsThis model is supplied unpainted for you to paint to your own specifications. It's recommended to apply a light coat of primer paint first.
£4.95
-
Industrial/Depot Roof Vents - OO Gauge (Pack of 4)
Industrial Roof Vents for Depots or Industrial Buildings. OO Gauge. Pack of 4 (2 large, 2 small)Industrial Roof Vents For OO Gauge Depots or Industrial BuildingsThe pack includes 4 (four) vents, two large and two small typeDetailed Bolt Head FittingsUnpainted, ready for painting to suit your depot or industrial building installation.Enamel paints are recommended.
£5.29
-
Household/Workshop Metal Waste Bins - OO Gauge (Pack of 6)
Household/Workshop Metal Waste Bins. OO Gauge. Pack of 6 binsHousehold/Workshop Metal Waste BinsOO GaugePack of 6- 4 closed- 1 with lid ajar- 1 with lid off with waste bags inside, lid is beside the bin with a waste bagSupplied unpainted, Recommended Spray Silver or weather, use primer first
£3.95
-
Workshop Battery Charger Trolley - OO Gauge
Pack includes 1 Battery Charger and 2 Workshop Wall SocketsOO GaugeWorkshop Battery Charger TrolleyPack includes one (1) battery charger and two (2) wall socketsOO GaugeBattery chargers are found in most railway depots and workshops, this type is mounted on a 4-wheel trolley to allow ease of movement around the depot, and is typical of those used to charge locomotive batteries. Most battery chargers have selectable voltage outputs to cater for different types of locomotive, for example, most early British Rail main line diesels have 110Volt systems, whereas Class 08 shunters are 90Volt and some modern locomotives work with 74Volts.The model is represented as if it is stored in the workshop awaiting its next duty; with the input and output cables coiled on each end of the trolley.This product is supplied unpainted, it is recommended to apply a light coat of primer before painting to suit your depot or workshop scene.
£4.95
-
Hydrovane Air Compressor Trailer - OO Gauge
Hydrovane Type Air Compressor TrailerOO GaugeSupplied with a length of rubber hose.Hydrovane Type Air CompressorOne portable diesel powered air compressor trailer.They were used at a massive variety of railway and industrial sites including Depots, Yards, Workshops, Building sites etc. OO GaugeThe model is a one piece resin item with a length of rubber hose supplied that can be fitted as desired.This model is supplied unpainted for you to paint to your own specifications. It's recommended to apply a light coat of primer paint first.
£5.95
-
Detailed Pallets with Cement Bags - OO Gauge (Pack of 6)
Detailed Pallets with Cement BagsOO GaugePack of 6Detailed Pallets With Cement BagsPack of 6OO GaugeSupplied unpainted, we recommend a light coat of primer before painting to suit your depot or workshop scene.At railway depots and workshops there is often building work going on, therefore the need for a supply of cement. Bags of cement are often delivered to the depot stacked onto a pallet.
£6.29
-
Air Brake Test Trolley - OO Gauge (Pack of 2)
Depot/Workshop Air Brake Test TrolleyOO GaugePack of 2, including pipingAir Brake Test TrolleyOO GaugePack of 2Brake Trolley's are used after maintenance of the braking system on wagons and coaches to confirm the operation is in accordance with design and set-up criteria.The Brake Trolley is supplied with air from a workshop compressor, and is fitted with a Driver Brake Valve to allow control the brakes as if the wagon or coach were coupled to a locomotive.The Brake Trolley is connected to the wagon or coach using extra-long brake pipes, one for the brake pipe [BP] the red one, and the other for the main reservoir pipe [MRP], normally yellow and on 'two piped' vehicles only. Pressure gauges fitted on the front of the Trolley show MRP and BP pressure.It is important for wagons and coaches to all brake evenly and consistently, therefore Brake Trolley's are used to enable measurements of leakage rates and the brake force build up and release times to be recorded. During each brake application and release operation the rise and fall time of the brake cylinder pressure on the wagon or coach is timed using a stopwatch.When not in-use the extra-long brake pipes would be stored wrapped around the upper handles of the Brake Trolley before it's parked away neatly (haha) in the corner of the workshop.Pack Contains- 2 Brake Test Trolleys- Length of Rubber Air LineComes UnpaintedPaint To Desired ColoursPrimer Recommended
£5.29
-
Wheel Chocks - OO Gauge (Pack of 4)
Wheel Chocks. OO Gauge. Pack of 4Pack of 4 Wheel ChocksA great detail addition for any depot or sidingsOO GaugeUnpainted, ready to paint to suit your depot, workshop or sidings sceneEnamel paints are recommended.
£2.49
-
Lifting Beam and Wire Lifting Cables - OO Gauge
The pack includes 1 Lifting Spreader Beam and 4 Flexible High Tension Lifting CablesOO GaugeLifting Beam & Wire Lifting Cables, Great Addition For Any Workshop, Used For Balancing While Lifting Heavy Object Like Power Unit's / Bogies EtcOften Seen Laid Around Depots & Workshops EtcOO GaugeThe pack includes one (1) Lifting Spreader Beam & four (4) Flexible High Tension Lifting Cables Made From RubberSupplied unpainted, a light coat of primer is recommended before painting as desired to suit your layout.
£4.95
-
Workshop Lathe and Bench Saw - OO Gauge
Workshop Lathe and Bench SawPack Includes:-1 Lathe and 1 Bench SawOO Gauge Workshop Lathe and Bench Saw (pack contains one of each)OO GaugeUnpainted ready to paint to suit your depot or workshop sceneEnamel paints are recommended.
£4.95
-
Wheelie Bins - OO Gauge (Pack of 6)
Wheelie Bins were first introduced in the UK in the early 1980s to provide a more efficient and hygienic method of waste collection, as well as to encourage recycling and reduce litter on the streets. The concept quickly caught on, and today wheelie bins are a common sight in most UK villages, towns and cities, used for both household and commercial waste collection.OO Gauge. Pack of 6 binsWheelie BinsOO GaugePack of 6, Supplied unpainted; recommended to Spray Black and weather, use primer first
£3.95
-
Wagon Wheelsets (Journal Bearing Type) - OO Gauge (Pack of 4, incl. 2 Pallets with axleboxes)
Goods wagons with journal white metal type axle bearings have been around since railways began; with widespread use on the British Rail network until the 1990s. Examples of these wheelsets can still be seen in and around most preserved railway workshops.OO Gauge Pack of 4 wheelsets, 2 pallets with axlebox parts and a wooden cradle.This detailed pack includes-- 4 Wheelsets representing those removed from goods wagons with journal bearing axleboxes,- 2 Pallets with journal bearing type axlebox parts,- 1 Wooden type Cradle for Road/Rail Transportation of 4 wheelsets.OO GaugeSupplied Unpainted; apply a coat of Primer before painting and weathering to suit your layout.NOTE- These Wheelsets are for static display/dioramas only, they are not suitable for fitting to vehicles to run on your layout.
£5.95
-
Workshop Benches - OO Gauge (Pack of 4)
Wooden Workshop BenchesOO Gauge Pack of 4 BenchesPack of 4 Wooden Style Workshop Benches (Unpainted)OO Gauge
£3.79
-
15 Ton Vehicle Lifting Jack Set for Wagons and Carriages - OO Gauge
15 Ton Vehicle Lifting Jack Set for Wagons and Carriages. OO Gauge. Set of 4 Jacks plus Control Trolley, Wiring and Electrical Boxes.15 Ton Vehicle Lifting Jack Set for Wagons and CarriagesJacks with Control Trolley, Wiring and Electrical Boxes)OO GaugeNote: these are static jacks, the jack lifting pads can be fitted at various height positions.Representing Electric Vehicle Lifting Jacks as typically used in British Rail carriage and wagon maintenance depots throughout the country.Era: 1960s OnwardsPack Includes:- 4 x 15 Ton Lifting Jacks with lifting pads that can be positioned in the slots as desired at any of the 4 height positions- Length Of Rubber Cabling- 1 x Control Trolley- 2 x Wall Connection SocketsThis model is supplied unpainted for you to paint to your own specifications. It's recommended to apply a light coat of primer paint first.
£9.49
-
Scrap Metal Waste Skips - OO Gauge (Pack of 6)
Scrap Metal Waste SkipsOO GaugePack of 6 skips, 2 small, 2 medium, 2 large.Scrap Metal Waste SkipsPack of 6Great Addition For Any Industrial Scene, Workshop, Scrapyard, Depot or car park2 Small Pallet Boxes2 Medium Metal Waste Skips2 Large Metal Waste SkipsOO GaugeSupplied Unpainted, Paint and Weather to Your Preference
£4.95
-
1920s Cast Iron Pot Belly Burning Stove - OO Gauge (Pack of 2)
Great Addition For Any Industrial Scene, Workshop or even install into a brake van?1920s Cast Iron Pot Belly Burning Stove (Pack of 2) - OO GaugeSupplied Unpainted, Paint And Weather To Your Preference
£3.95
-
1960s Diesel Fuelling Point Pumps - OO Gauge (Pack of 4)
1960s style Diesel Fuelling Point Pumps (Pack of 4)OO Gauge1960s style Diesel Fuelling Point PumpsPack of 4 PumpsOO GaugeSupplied unpainted
£4.95
-
Workshop/Office Filing Cabinet - OO Gauge
One Filing Cabinet with 8 DrawersOO GaugeOne Filing Cabinet with 8 Drawers, 3 of them slightly openGreat addition for any Workshop or Depot OfficeOO GaugeUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended
£1.95
-
Workshop Electric Tugs - OO Gauge (Pack of 2)
Detailed Electric Tugs as used around Depots and WorkshopsOO GaugePack of 2Workshop Tug Electric TugsOO GaugeDetailed Workshop Electric Tugs, Used Around Depots and WorkshopsPack of 2:Includes: 1 with a Short and 1 with a Long Rear Load Area.This model is supplied unpainted for you to paint to your own specifications. It's recommended to apply a light coat of primer paint first.The oil barrel, vacuum cylinder and waste bin shown in the pictures are not included, however packs of these are available separately.
£6.95
-
Workshop Tool Trays - OO Gauge (Pack of 12)
Workshop Tool TraysOO GaugePack contains 4 of each of 3 styles, a total of 12 tool traysWorkshop Tool Trays - 3 styles includedOO GaugePack contains 4 of each style, a total of 12 tool traysUnpainted ready to paint to suit your depot or workshop sceneEnamel paints are recommended.
£2.95
-
Detailed Pallets with Brake Blocks - OO Gauge (Pack of 6)
Detailed Pallets with Brake BlocksOO GaugePack of 6Detailed Pallets With Brake BlocksPack of 6OO GaugeMost railway depots and workshops need a supply of new brake blocks for fitting to rolling stock during their regular maintenance exams. The new brake blocks are often delivered to the depot stacked onto a pallet.Supplied unpainted, we recommend a light coat of primer before painting to suit your depot or workshop scene.
£6.29
-
Empty Cable Drums - OO Gauge (Pack of 10)
Pack of 10 Empty Cable Drums for your Workshop or DepotOO GaugePack of 10 Empty Cable DrumsOO GaugeUnpainted, ready to paint to suit your depot or workshop scene
£6.49
-
Electric Wall Socket Connection Boxes - OO Gauge (Pack of 8)
Electric Wall Socket Connection BoxesOO GaugePack of 8Electric Wall Socket Connection Boxes, typical of those used in many workshops, depots and industrial buildings.OO GaugePack of 8 Electrical cables can be added by using our Rubber Silicone Tubing, product 0WH0401401With conduit below each box which can be trimmed to desired height.Overall height of conduit and connection box is 16mmSupplied unpainted.
£3.49
-
CDA Wagon Wheelsets Wagon Load to fit Bachmann OCA Wagon - OO Gauge
Wagon load of Wheelsets to fit an open type OCA wagon. Set includes Nine (9) wheelsets plus a cradle to hold the wheelsets in the wagon.Wheelsets load to fit one open OCA type wagon. This set includes nine (9) static CDA Wagon wheelsets plus a cradle to hold the wheelsets in a Bachmann OCA wagon. The set may also fit other open wagons of similar types such as the EFE Rail SEA wagons. All parts are supplied unpainted, it is suggested to use a light coat of primer first before painting to suit your layout. NOTE- These Wheelsets are for creating wagon loads, static display/dioramas only, they are not suitable for fitting to vehicles to run on your layout.
£7.95
-
Industrial Ladders - OO Gauge (Pack of 6)
300Industrial Ladders, choice of Black or Brown. OO Gauge. Pack of 6 LaddersPack of 6 Pre Coloured Workshop LaddersMade From Durable Plastic MaterialDimensions15.2 cm Length Each4.9mm Wide1mm Thickvailable In Black Or Brown, please select from the menu above
£3.49
-
Scrap Accessories for Class 45 Peaks - OO Gauge
Scrap Peak Locomotive Accessories. Including Cab Doors, Bulkhead Door, Nose Door and Seats. OO Gauge. Pack of Class 45 scrap accessories includes-- 2 x Scrap Cab Doors- Rear Bulkhead Access Door- Nose Access Door- Seats 2 Unfolded & 1 FoldedOO GaugeThis model is supplied unpainted for you to paint to your own specifications. It's recommended to apply a light coat of primer paint first.The Scrap Peak Cab is not included and are available separately
£3.49
-
Rail Mounted Stops - OO Gauge (4 Pairs)
Rail Mounted Stops. OO Gauge for Code 100 Rail only. (4 pairs)Rail Mounted StopsOO Gauge for Code 100 Rail only(4 pairs)Seen throughout many Depots in England, Scotland & Wales.Supplied unpainted, for Code 100 rail (Standard Rail Peco, Bachmann, Hornby)
£3.95
-
Depot Roadway Safety Barriers - OO Gauge (Pack of 6)
Depot Roadway Safety Barriers - (Pack of 6 x 75mm lengths)This is a Pre Coloured Plastic KitOO GaugeTypical of roadway safety barriers seen at diesel depotsDepot Roadway Safety Barriers - (Pack of 6) - OO GaugeTypical of roadway safety barriers seen from the early 1990s at depots such as Knottingley TMD in West Yorkshire.This is a Pre Coloured Plastic Kit, with a simple assembly process.Supplied as 6 x 75mm lengths included in the pack totalling 450mm (45cm)Pack Includes:-- 6 x Yellow Front Barrier- 36 x Black posts- 6 x Grey Concrete Standing Bases (Optional To Install)Assemble using a plastic glue or superglue recommended; please ensure you follow any glue manufacturers instructions.
£4.29
-
Paint Tins - OO Gauge (Pack of 10)
Paint TinsOO GaugePack of 10Paint Tins OO GaugePack of 10 (ten) paint tinsUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommendedPack contains 10 x unpainted Paint Tins ( Figure is NOT included )
£2.49
You have seen 96 out of 148 products