Bargain Bundle Packs

Concrete Cable Trough Trunking is an integral component of modern railway infrastructure, contributing to the efficiency, safety, and reliability of train operations by providing a robust and organized solution for cable management and distribution.Concrete Cable Trough Trunking Mega Pack - OO Gauge This Mega Pack Covers Over 5.5 Meters Of Cable Trunking! Pack Contains: 10 - Lineside Electrical Cabinets 3 - Concrete Cable Trough Trunking Straight Pack (Pack Of 16, 172.8cm Total Length Each Pack) 1 - Concrete Cable Trough Trunking Raised Pack (Pack of 2) 1 - Concrete Cable Open Trough Pack (Pack of 13) 1 - Concrete Cable Junctions Pack (Pack Of 8) 1 - Concrete Cable Trough Angle Pack (Pack Of 16) About Concrete Cable Trough Trunking: Railway concrete trough trunking is utilized extensively throughout the network for various purposes: Cable Management: One primary use is for organizing and protecting cables that run alongside or underneath railway tracks. The trough trunking provides a secure pathway for cables, preventing damage from environmental factors and ensuring efficient cable management. Electrical Distribution: It serves as a conduit for electrical wires, allowing for the safe and reliable distribution of power to various railway components such as signals, lighting systems, communication devices, and other infrastructure along the tracks. Safety Enhancement: Concrete trough trunking enhances safety by minimizing the risk of cable exposure, which could otherwise pose hazards to railway personnel, passengers, and maintenance workers. By securely enclosing the cables, it reduces the likelihood of accidental contact or tripping. Durability and Longevity: Concrete trough trunking is known for its durability and ability to withstand heavy loads, extreme weather conditions, and wear and tear over time. This ensures the longevity of the railway infrastructure, minimizing the need for frequent repairs or replacements. Maintenance Access: While providing robust protection for cables, the trunking also allows for relatively easy access during maintenance and repair operations. Removable lids or access points facilitate inspection, troubleshooting, and necessary adjustments without disrupting railway operations extensively. Integration with Signalling Systems: Railway concrete trough trunking plays a crucial role in supporting signalling systems along the tracks. It accommodates cables necessary for transmitting signals that control train movements, ensuring smooth and safe operations throughout the network. Supplied In Grey Paint If Desired To Choice Of Concrete Colour

Read more less

BARGAIN Bundle Pack E4C Detailed Overhead Line Equipment Platform Mast Structures Kit - Parts to construct Four x SERIES 2 - Two Track Platform Cantilever type 130mm Arm Masts, including Magnetic Bases, Magnetic Registration Arms and Return Conductor Wire Mounts. OO Gauge SET E4-22 - product code 4WH0900422 PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW This Bundle Set E4-22 includes:- 4 x E4-3 - Series 2 Two Track Platform 130mm Cantilever Structure Kits 2 x E4-6 - Left Hand Magnetic Registration Arms Sets 2 x E4-7 - Right Hand Magnetic Registration Arms Sets 1 x E4-10 - Conductor Wire Mounts (Pack of 5) All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included. OHLE Structure kit (SET E4-22) each Mast assembled dimensions:- Maximum height above your platform (including base) - 101mm Overall length of structure (across the tracks) - 131mm Max width of structure/base - 14mm Nominal height of contact wire with Mast fitted onto an 18mm high platform (if wire fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

BARGAIN Bundle Pack E4A Detailed Overhead Line Equipment Mast Structures Kit - Parts to construct Four x SERIES 2 - Two Track Cantilever type 100mm Arm Masts, including Magnetic Bases, Magnetic Registration Arms, Wire Tensioners and Return Conductor Wire Mounts. OO Gauge SET E4-20 - product code 4WH0900420 PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW This Bundle Set E4-20 includes:- 4 x E4-1 - Series 2 Two Track Cantilever Structure Kits 2 x E4-6 - Left Hand Magnetic Registration Arms Sets 2 x E4-7 - Right Hand Magnetic Registration Arms Sets 1 x E4-8 - Post Mounted Tensioners (Pack of 2) 1 x E4-10 - Conductor Wire Mounts (Pack of 5) All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included. OHLE Structure kit (SET E4-20) each Mast assembled dimensions:- Maximum height above baseboard (including base) - 115mm Overall length of structure (across the tracks) - 103mm Max width of structure/base - 14mm Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

BARGAIN Bundle Pack E4B Detailed Overhead Line Equipment Mast Structures Kit - Parts to construct Four x SERIES 2 - Two Track Cantilever type 130mm Arm Masts, including Magnetic Bases, Magnetic Registration Arms, Wire Tensioners and Return Conductor Wire Mounts. OO Gauge SET E4-21 - product code 4WH0900421 PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW This Bundle Set E4-21 includes:- 4 x E4-2 - Series 2 Two Track 130mm Cantilever Structure Kits 2 x E4-6 - Left Hand Magnetic Registration Arms Sets 2 x E4-7 - Right Hand Magnetic Registration Arms Sets 1 x E4-8 - Post Mounted Tensioners (Pack of 2) 1 x E4-10 - Conductor Wire Mounts (Pack of 5) All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included. OHLE Structure kit (SET E4-21) each Mast assembled dimensions:- Maximum height above baseboard (including base) - 115mm Overall length of structure (across the tracks) - 131mm Max width of structure/base - 14mm Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

BARGAIN Bundle Pack C1  Detailed Overhead Line Equipment Structure Kits – Parts to construct Four Mk1 25kV Type C Single-Track Tall Mast Cantilever Structures with Magnetic Registration Arms and Return Conductor Supports; Typical of a type fitted to the West Coast Main Line route, incl. Magnetic Bases.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW OO Gauge SET E16-90 - product code 4WH0901690 This Bundle Set E16-90 includes:- 4 x E16-28 - Type C Cantilever Structure Kits 2 x E16-26 - Magnetic Registration Arms Sets 1 x E16-17 - Return Conductor Supports Set All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included. Each OHLE Structure (SET E16-90) assembled dimensions:-• Structure height above your Baseboard (including bases) - 119mm• Structure length (across the tracks) - 69mm• Structure width - 14mm• Nominal height of contact wire (if fitted to Magnetic Registration Arms) - approx. 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

BARGAIN Bundle Pack B2  Detailed Overhead Line Equipment Structure Kits – Parts to construct Four Mk1 25kV Type B 2-Track Structures with Magnetic Registration Arms and Return Conductor Supports; Typical of a type fitted to the West Coast Main Line route, incl. Magnetic Bases.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW OO Gauge SET E16-86 - product code 4WH0901686 This Bundle Set E16-86 includes:- 4 x E16-11 - Type B 130mm Structure Kits 4 x E16-6 - Magnetic Registration Arms Sets 1 x E16-7 - Return Conductor Supports Set All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included. Each OHLE Structure (SET E16-86) assembled dimensions:-• Structure height above your Baseboard (including bases) - 111mm• Structure length (across the tracks) - 155mm• Structure width - 14mm• Nominal height of contact wire (if fitted to Magnetic Registration Arms) - approx. 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

BARGAIN Bundle Pack B1  Detailed Overhead Line Equipment Structure Kits – Parts to construct Two Mk1 25kV Type B Multi-Track Structures with Magnetic Registration Arms and Return Conductor Supports; Typical of a type fitted to the West Coast Main Line route, incl. Magnetic Bases.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW OO Gauge SET E16-85 - product code 4WH0901685 This Bundle Set E16-85 includes:- 2 x E16-12 - Type B 230mm Structure Kits 1 x E16-19 - 55mm Cantilever Spans Set 2 x E16-20 - Type B Double Sided Masts 4 x E16-6 - Magnetic Registration Arms Sets 1 x E16-7 - Return Conductor Supports Set All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included. Each OHLE Structure (SET E16-85) assembled dimensions:-• Structure height above your Baseboard (including bases) - 111mm• Structure length (across the tracks) - 315mm• Structure width - 14mm• Nominal height of contact wire (if fitted to Magnetic Registration Arms) - approx. 78mm above baseboard [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

BARGAIN Bundle Pack A2  Detailed Overhead Line Equipment Structure Kits – Parts to construct Four Mk1 25kV Type A 3-Track Structures with Magnetic Registration Arms and Return Conductor Supports; Typical of a type fitted to the West Coast Main Line route, incl. Magnetic Bases.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E16-81 - product code 4WH0901681 This Bundle Set E16-81 includes:- 4 x E16-1 - Type A 130mm Structure Kits 2 x E16-10 - 50mm Extension Span Sets 6 x E16-6 - Magnetic Registration Arms Sets 1 x E16-7 - Return Conductor Supports Sets All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included. Each OHLE Structure (SET E16-81) assembled dimensions:-• Structure height above your Baseboard (including bases) - 111mm• Structure length (across the tracks) - 207mm• Structure width - 14mm• Nominal height of contact wire (if fitted to Magnetic Registration Arms) - approx. 78mm above baseboard [wires not included]. Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

BARGAIN Bundle Pack A1  Detailed Overhead Line Equipment Structure Kits – Parts to construct Two Mk1 25kV Type A Double Span Platform Structures with Magnetic Registration Arms and Return Conductor Supports; Typical of a type fitted to the West Coast Main Line route, incl. Magnetic Bases.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E16-80 - product code 4WH0901680 This Bundle Set E16-80 includes:- 2 x E16-1 - Type A 130mm Structure Kits 2 x E16-3 - Type A 190mm Platform Structure Kits 1 x E16-10 - 50mm Extension Span Set 2 x E16-14 - Double Sided Platform Masts 4 x E16-6 - Magnetic Registration Arms Sets 1 x E16-7 - Return Conductor Supports Sets All parts are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included. Each OHLE Structure (SET E16-80) assembled dimensions:-• Structure height above your Platform (including bases) - 94mm• Structure length (across the tracks) - 400mm• Structure width - 14mm• Nominal height of contact wire (if fitted to Magnetic Registration Arms) - approx. 78mm above baseboard assuming an 18mm Platform Height [wires not included] Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.

Read more less

Detailed N-Gauge Overhead Line Equipment Mast Structure Kit BUNDLE BUNDLE includes Mk1 Type B Platform Structure Kits to make up Two Double 100mm Spans for up to 2 x 2 Tracks, including Magnetic Bases Typical of the style fitted on the West Coast Main Line.SET E11-31 - product code 2WH0901131PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW and REFER TO THE PICTURES This set E11-31 includes:- 2 x E11-13 - Mk1 Type B OHLE  Platform Structure kits 2 x E11-15 - Mk1 Type B OHLE Platform Double Sided Masts 1 x E11-9 - Mk1 Type B OHLE Additional Spans (x2) The Mast Bases included in the kit come with magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the Mk1 Style OHLE are available to Purchase Separately as follows:- SET E11-5 - Mk1 Registration Arms and Catenary Wire Supports for Type A & B Structures (SET E11-5) - product code 2WH0901105 All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.OHLE Structure kit (SET E11-31) assembled dimensions:- Maximum height above your platform (including base) - 55mm Overall length of structure (across the tracks) - 224mm Max width of each structure/base - 8mm Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less

Detailed N-Gauge Overhead Line Equipment Mast Structure Kit BUNDLE BUNDLE includes Mk1 Type A Platform Structure Kits to make up Two Double 100mm Spans for up to 2 x 2 Tracks, including Magnetic Bases Typical of the style fitted on the West Coast Main Line.SET E11-30 - product code 2WH0901130PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW and REFER TO THE PICTURES This set E11-30 includes:- 2 x E11-3 - Mk1 Type A OHLE  Platform Structure kits 2 x E11-4 - Mk1 Type A OHLE Platform Double Sided Masts 1 x E11-8 - Mk1 Type A OHLE Additional Spans (x2) The Mast Bases included in the kit come with magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the Mk1 Style OHLE are available to Purchase Separately as follows:- SET E11-5 - Mk1 Registration Arms and Catenary Wire Supports for Type A & B Structures (SET E11-5) - product code 2WH0901105 All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.OHLE Structure kit (SET E11-30) assembled dimensions:- Maximum height above your platform (including base) - 55mm Overall length of structure (across the tracks) - 224mm Max width of each structure/base - 8mm Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less