In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment 2 x Registration Arms LEFT HAND for SERIES 1 Twin Track Cantilever type OHLEOO Gauge
SET E2-9 - product code 4WH0900209REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment 2 x Registration Arms LEFT HAND for SERIES 1 Twin Track Cantilever type OHLEPLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-9 - product code 4WH0900209
This set E2-9 includes TWO (2) Left Handed Registration Arms that are intended for fitting to the SERIES 1 Twin Track Cantilever kits (SETs E2-1 to E2-5).PLEASE NOTE that these registration arms are NOT intended to support the fitting of contact wires.
Other types of registration arms for the SERIES 1 Twin Track Cantilever OHLE are available as follows:-
SET E2-10 Right Hand Registration Arm (Series 1)
SET E2-11 Combined Left & Right Hand Registration Arms (Series 1)
SET E2-12 Left Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E2-13 Right Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E2-14 Combined Left & Right Hand Registration Arms (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment 2 x Registration Arms RIGHT HAND for SERIES 1 Twin Track Cantilever type OHLEOO Gauge
SET E2-10 - product code 4WH0900210REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment 2 x Registration Arms RIGHT HAND for SERIES 1 Twin Track Cantilever type OHLEPLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-10 - product code 4WH0900210
This set E2-10 includes TWO (2) Right Handed Registration Arms that are intended for fitting to the SERIES 1 Twin Track Cantilever kits (SETs E2-1 to E2-5).PLEASE NOTE that these registration arms are NOT intended to support the fitting of contact wires.
Other types of registration arms for the SERIES 1 Twin Track Cantilever OHLE are available as follows:-
SET E2-9 Left Hand Registration Arm (Series 1)
SET E2-11 Combined Left & Right Hand Registration Arms (Series 1)
SET E2-12 Left Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E2-13 Right Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E2-14 Combined Left & Right Hand Registration Arms (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Richard Sat On The Throne. Detailed Figure with Toilet Roll And HolderOO GaugeOO GaugeRichard Sat On The Throne
We have done a painted example in picture (Right)
Detailed Figure With Toilet Roll And Holder
This model is supplied unpainted for you to paint to your own specifications. It's recommended to apply a light coat of primer paint first.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Ride On Garden Railway - Peak Set. OO Scale. Loco, Passenger Cars and Track.Ride On Garden Railway - Peak SetOO ScaleWhy Not Add A Detailed Garden Railway Set To Your Layout, In A Back Garden, Side Of Railway Line Or Even In The Park On Your Layout?Representing a 7 1/4 Inch Gauge Railway.Peak Includes:- Class 45 Peak Locomotive- Small Engine Driver Trailer- 4 x Large Passenger Carrying Wagons**Please Note This Is A Decoration Item Not A Motorized SetSupplied UnpaintedAn Additional Track Pack is also Available
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Roof Exhaust Vents for Diesel Depots, BR type design 1960s onwards. OO Gauge. Pack of 4.Roof Exhaust Vents for Diesel Depots, a BR type design that would not look out of place on a depot from the 1960s onwardsOO GaugePack of 4Note the Roof Access Walkways in the picture are Not IncludedThe roof vents are 20mm Wide, 22mm Long and 8mm HighUnpainted, ready for painting to suit your depot installation. Enamel paints are recommended.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
We have been using this tubing in addition with many of our West Hill Wagon Works Kits, And Often Get Asked If We Can Supply Separately
1.6mm Diameter, Matt Dark Grey In Colour, Ideal Representation For Pipework, Cabling & More…Rubber Silicone Tubing Length (Ultra Soft) - Approx. 50cm - Length Of Silicone Runner Tubing1.6mm Diameter, Ideal Representation For Pipework, Cabling & More…
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Add a bit more detail with these salt grit bins, often seen on station platforms. HO Scale (1:87)Adverse weather can affect station platforms throughout the world; salt / grit is often used to keep surfaces safe and has to be stored ready for easy use.Salt / Grit bins such as these are often found on station platforms, car parks, walkways etc.HO Scale (1:87)
Pack of 4 bins,- 2 marked with SALT- 2 marked with GRIT
Please note these items are supplied unpainted, a light coat of primer is recommended first before painting to suit your layout.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Add a bit more detail with these salt grit bins, often seen on station platforms. N GaugeAdverse weather can affect station platforms throughout the world; salt / grit is often used to keep surfaces safe and has to be stored ready for easy use.Salt / Grit bins such as these are often found on station platforms, car parks, walkways etc.N Gauge
Pack of 4 bins,- 2 marked with SALT- 2 marked with GRIT
Please note these items are supplied unpainted, a light coat of primer is recommended first before painting to suit your layout.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Add a bit more detail with these salt grit bins, often seen on station platforms. O GaugeAdverse weather can affect station platforms throughout the world; salt / grit is often used to keep surfaces safe and has to be stored ready for easy use.Salt / Grit bins such as these are often found on station platforms, car parks, walkways etc.O Gauge
Pack of 4 bins,- 2 marked with SALT- 2 marked with GRIT
Please note these items are supplied unpainted, a light coat of primer is recommended first before painting to suit your layout.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Add a bit more detail with these salt grit bins, often seen on station platforms. OO GaugeAdverse weather can affect station platforms throughout the world; salt / grit is often used to keep surfaces safe and has to be stored ready for easy use.Salt / Grit bins such as these are often found on station platforms, car parks, walkways etc.OO Gauge
Pack of 4 bins,- 2 marked with SALT- 2 marked with GRIT
Please note these items are supplied unpainted, a light coat of primer is recommended first before painting to suit your layout.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Add a bit more detail with these salt grit bins, often seen on station platforms. TT:120 ScaleAdverse weather can affect station platforms throughout the world; salt / grit is often used to keep surfaces safe and has to be stored ready for easy use.Salt / Grit bins such as these are often found on station platforms, car parks, walkways etc.TT:120 Scale
Pack of 4 bins,- 2 marked with SALT- 2 marked with GRIT
Please note these items are supplied unpainted, a light coat of primer is recommended first before painting to suit your layout.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Scrap Peak Locomotive Accessories. Including Cab Doors, Bulkhead Door, Nose Door and Seats. OO Gauge. Pack of Class 45 scrap accessories includes-- 2 x Scrap Cab Doors- Rear Bulkhead Access Door- Nose Access Door- Seats 2 Unfolded & 1 FoldedOO GaugeThis model is supplied unpainted for you to paint to your own specifications. It's recommended to apply a light coat of primer paint first.The Scrap Peak Cab is not included and are available separately
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
One Detailed Scrap Class 25 Cab (with Gangway End Doors).O Gauge.(includes a separate Cab Rear Bulkhead)Detail Your Depot or Diorama with this Amazing Detailed Scrap Class 25 Cab.O GaugeA cab rear Bulkhead is included & can be fitted separately.The Optional Scrap Accessories (please select from the menu above) include:1 Scrap Cab Roof1 Scrap Cab Side1 Scrap Cab Lower Front1 Drivers Seat1 Second Man Seat2 Cab-side Doors2 Bulkhead Doors
This model is supplied unpainted, on the print sprue, and will need to be carefully removed by using fine Sprue Cutters. Once removed from the sprue a light coat of primer is recommended before painting as desired to suit your layout.Tail Lamps and Not-to-be-Moved boards are available separately.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
One Detailed Scrap Class 25 Cab (3 Big Windows - without Gangway End Doors).O Gauge.(includes a separate Cab Rear Bulkhead)Detail Your Depot or Diorama with this Amazing Detailed Scrap Class 25 Cab.O GaugeA cab rear Bulkhead is included & can be fitted separately.The Optional Scrap Accessories (please select from the menu above) include:1 Scrap Cab Roof1 Scrap Cab Side1 Scrap Cab Lower Front1 Drivers Seat1 Second Man Seat2 Cab-side Doors2 Bulkhead Doors
This model is supplied unpainted, on the print sprue, and will need to be carefully removed by using fine Sprue Cutters. Once removed from the sprue a light coat of primer is recommended before painting as desired to suit your layout.Tail Lamps and Not-to-be-Moved boards are available separately.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
One Detailed Scrap Class 25 Cab (with Gangway End Doors).OO Gauge.(includes a separate Cab Rear Bulkhead)Detail Your Depot or Diorama with this Amazing Detailed Scrap Class 25 Cab.OO GaugeA cab rear Bulkhead is included & can be fitted separately.The Optional Scrap Accessories (please select from the menu above) include:1 Scrap Cab Roof1 Scrap Cab Side1 Scrap Cab Lower Front1 Drivers Seat1 Second Man Seat2 Cab-side Doors2 Bulkhead Doors
This model is supplied unpainted, on the print sprue, and will need to be carefully removed by using fine Sprue Cutters. Once removed from the sprue a light coat of primer is recommended before painting as desired to suit your layout.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
One Detailed Scrap Class 25 Cab (3 Big Windows - without Gangway End Doors).OO Gauge.(includes a separate Cab Rear Bulkhead)Detail Your Depot or Diorama with this Amazing Detailed Scrap Class 25 Cab.OO GaugeA cab rear Bulkhead is included & can be fitted separately.The Optional Scrap Accessories (please select from the menu above) include:1 Scrap Cab Roof1 Scrap Cab Side1 Scrap Cab Lower Front1 Drivers Seat1 Second Man Seat2 Cab-side Doors2 Bulkhead Doors
This model is supplied unpainted, on the print sprue, and will need to be carefully removed by using fine Sprue Cutters. Once removed from the sprue a light coat of primer is recommended before painting as desired to suit your layout.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Scrap Metal Waste SkipsOO GaugePack of 6 skips, 2 small, 2 medium, 2 large.Scrap Metal Waste SkipsPack of 6Great Addition For Any Industrial Scene, Workshop, Scrapyard, Depot or car park2 Small Pallet Boxes2 Medium Metal Waste Skips2 Large Metal Waste SkipsOO GaugeSupplied Unpainted, Paint and Weather to Your Preference
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of 20 Screw Couplings with moulded Drawhooks (non-working) as used on BR Rolling Stock.Add some extra detail to your locomotives, coaches and wagons (please read the full product description).OO Gauge (supplied unpainted)BR style Screw Couplings and Drawhooks pack includes:-
20 - Non-working Screw Couplings with moulded drawhooks.Notes:-
These are non-working couplings intended for display purposes, they are not suitable for coupling vehicles together.
The drawhook shanks are 1mm square.
These parts are delicate and may not be suitable for use with standard model couplings fitted.
The dummy couplings are supplied unpainted.
Top-Tip - use a light coat of primer first, and paint the couplings before removing them from the sprue.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Screw Fit NEM Socket Mounts. Useful for kitbuilt & scratchbuilt stock. OO Gauge. Pack of 10Screw Fit NEM Socket Mounts - OO Gauge (supplied in a Pack of 10)These OO Gauge NEM sockets MOUNTS are intended to provide options for fitting NEM sockets when building rolling stock kits or scratch-building. They are suitable for fitting to the flat underside of a wagon underframe.The pack includes 10 NEM socket MOUNTS -- NEM socket MOUNTS with a 2mm countersunk screw mounting hole behind the socket mount.- The overall depth of each NEM Socket Mount from the top of the mounting is 6mm- The overall width of each NEM Socket Mount is 12mmSupplied with 10 x 2.75mm spacers which may help if fitting to kit built rolling stockThese mounts can be used with our NEM Sockets
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Screw Fit NEM Sockets - Long (15mm). Useful for kitbuilt & scratchbuilt stock. OO Gauge. Pack of 10Screw Fit NEM Sockets - Long (Pack of 10)These OO Gauge NEM sockets are intended to provide options for fitting standard couplings when building or modifying rolling stock, kits or scratch-building. They are suitable for fitting to the flat underside of a wagon underframe. The pack includes 10 NEM sockets - - NEM sockets with 2mm countersunk screw mounting hole that is 15mm behind the socket face.- The overall depth of each NEM Socket from the top of the mounting is 6mmSupplied with 10 x 2.75mm spacers which may help if fitting to kit built rolling stock.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Screw Fit NEM Sockets - Short (10mm). Useful for kitbuilt & scratchbuilt stock. OO Gauge. Pack of 10Screw Fit NEM Sockets - Short (Pack of 10)These OO Gauge NEM sockets are intended to provide options for fitting standard couplings when building or modifying rolling stock, kits or scratch-building. They are suitable for fitting to the flat underside of a wagon underframe. The pack includes 10 NEM sockets - - NEM sockets with 2mm countersunk screw mounting hole that is 10mm behind the socket face.- The overall depth of each NEM Socket from the top of the mounting is 6mmSupplied with 10 x 2.75mm spacers which may help if fitting to kit built rolling stock.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Self Adhesive Safety Markings - OO Gauge
Pack Includes 6 x (6mm x 190mm) and 4 x (4mm x 190mm) StripsSelf Adhesive Simply Remove No Cutting Needed And Apply As Required
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detail your lineside with this kit of Semaphore Signal Posts and Cables. Total Length 1 metre. OO Gauge.Semaphore Signal Posts & Cable (1 Metre, 3' 3"1/2)) KitThese will require painting to your desired colour.This kit will provide 16 Posts for to model signal cabling for semaphore signals.As per pictures these are mounted on flat bases which can be removed if required.A spacing tool is included and fine wire which will be required to be glued onto posts.This is a model NON-Working Kit and is for cosmetic display purposes only on your layout.OO Gauge
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Mast Structure Kit - SERIES 1 Twin Track Cantilever type with 115mm Arm, including Magnetic BaseOO GaugeSET E2-2 - product code 4WH0900202PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 Twin Track Cantilever type with 115mm Arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-2 - product code 4WH0900202This set E2-2 includes parts to construct One (1) basic SERIES 1 Twin Track Cantilever Mast structure. One Pile Driven style Base is included in the kit, with two magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.
Registration Arm options for the SERIES 1 Twin Track Cantilever type OHLE are available to Purchase Separately as follows:-
SET E2-9 Left Hand Registration Arm (Series 1)
SET E2-10 Right Hand Registration Arm (Series 1)
SET E2-11 Combined Left & Right Hand Registration Arms (Series 1)
SET E2-12 Left Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E2-13 Right Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E2-14 Combined Left & Right Hand Registration Arms (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]
OHLE Structure kit (SET E2-2) dimensions:-
Maximum height above baseboard (including base) - 121mm
Overall length of structure (across the tracks) - 115mm
Max width of structure - 11.6mm
Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Mast Structure Kit - SERIES 1 Twin Track Cantilever type with 95mm Arm, including Magnetic BaseOO GaugeSET E2-1 - product code 4WH0900201PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 Twin Track Cantilever type with 95mm Arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-1 - product code 4WH0900201This set E2-1 includes parts to construct One (1) basic SERIES 1 Twin Track Cantilever Mast structure. One Pile Driven style Base is included in the kit, with two magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.Registration Arm options for the SERIES 1 Twin Track Cantilever type OHLE are available to Purchase Separately as follows:-
SET E2-9 Left Hand Registration Arm (Series 1)
SET E2-10 Right Hand Registration Arm (Series 1)
SET E2-11 Combined Left & Right Hand Registration Arms (Series 1)
SET E2-12 Left Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E2-13 Right Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E2-14 Combined Left & Right Hand Registration Arms (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.
Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]OHLE Structure kit (SET E2-1) dimensions:-
Maximum height above baseboard (including base) - 121mm
Overall length of structure (across the tracks) - 96mm
Max width of structure - 11.6mm
Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Mast Structure Kit - SERIES 1 Twin Track Cantilever type for Platform mounting with 115mm Arm, including Magnetic BaseOO GaugeSET E2-5 - product code 4WH0900205PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 1 Twin Track Cantilever type for Platform mounting with 115mm Arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-5 - product code 4WH0900205This set E2-5 includes parts to construct One (1) basic SERIES 1 Twin Track Cantilever Mast structure that is intended for mounting at Platform level. One Concrete style Base is included in the kit, with magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.Registration Arm options for the SERIES 1 Twin Track Cantilever type OHLE are available to Purchase Separately as follows:-
SET E2-9 Left Hand Registration Arm (Series 1)
SET E2-10 Right Hand Registration Arm (Series 1)
SET E2-11 Combined Left & Right Hand Registration Arms (Series 1)
SET E2-12 Left Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E2-13 Right Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E2-14 Combined Left & Right Hand Registration Arms (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]
OHLE Structure kit (SET E2-5) dimensions:-
Maximum height above platform (including base) - 104mm
Overall length of structure (across the tracks) - 115mm
Max width of structure - 11.6mm
Nominal height of contact wire with Mast fitted onto an 18mm high platform (if wire fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 100mm Arm, including Magnetic BaseOO GaugeSET E4-1 - product code 4WH0900401PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 100mm Arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-1 - product code 4WH0900401This set E4-1 includes parts to construct one (1) basic SERIES 2 - Two Track Cantilever Mast structure. One Pile Driven style Base is included in the kit, with magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.Registration Arm options for the SERIES 2 - Two Track Cantilever type OHLE are available to Purchase Separately as follows:-
SET E4-4 Left Hand Registration Arm (Series 2)
SET E4-5 Right Hand Registration Arm (Series 2)
SET E4-6 Left Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E4-7 Right Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]
OHLE Structure kit (SET E4-1) dimensions:-
Maximum height above baseboard (including base) - 115mm
Overall length of structure (across the tracks) - 103mm
Max width of structure/base - 14mm
Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 130mm Arm for mounting on Platforms, including Magnetic BaseOO GaugeSET E4-3 - product code 4WH0900403PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 130mm Arm for mounting onto Platforms, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-3 - product code 4WH0900403This set E4-3 includes parts to construct one (1) basic SERIES 2 - Two Track Cantilever Mast structure. One Concrete style Base is included in the kit, with magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.Registration Arm options for the SERIES 2 - Two Track Cantilever type OHLE are available to Purchase Separately as follows:-
SET E4-4 Left Hand Registration Arm (Series 2)
SET E4-5 Right Hand Registration Arm (Series 2)
SET E4-6 Left Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E4-7 Right Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]
OHLE Structure kit (SET E4-3) dimensions:-
Maximum height above platform (including base) - 101mm
Overall length of structure (across the tracks) - 131mm
Max width of structure/base - 14mm
Nominal height of contact wire with Mast fitted onto an 18mm high platform (if wire fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 130mm Arm, including Magnetic BaseOO GaugeSET E4-2 - product code 4WH0900402PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment Mast Structure Kit - SERIES 2 - Two Track Cantilever type with 130mm Arm, including Magnetic BasePLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-2 - product code 4WH0900402This set E4-2 includes parts to construct one (1) basic SERIES 2 - Two Track Cantilever Mast structure. One Pile Driven style Base is included in the kit, with magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.Registration Arm options for the SERIES 2 - Two Track Cantilever type OHLE are available to Purchase Separately as follows:-
SET E4-4 Left Hand Registration Arm (Series 2)
SET E4-5 Right Hand Registration Arm (Series 2)
SET E4-6 Left Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E4-7 Right Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 260 to 920mm in OO Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.The Peco wires are available in the following lengths 200mm, 260mm, 340mm, 380mm and 500mm, so if you are fitting wires then it makes sense to space your masts to suit the Peco wire lengths. [wires are not included in this kit]
OHLE Structure kit (SET E4-2) dimensions:-
Maximum height above baseboard (including base) - 115mm
Overall length of structure (across the tracks) - 131mm
Max width of structure/base - 14mm
Nominal height of contact wire (if fitted to Magnetic Registration Arms) - 78mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Alarm Units for your Buildings. O Gauge. Pack of 5Alarm Units for your BuildingsPack of 5 (variety of styles included)O GaugeUnpainted, ready to paint to suit your street, depot or workshop sceneEnamel paints are recommended
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Alarm Units for your Buildings. OO Gauge. Pack of 5Alarm Units for your BuildingsPack of 5 (variety of styles included)OO GaugeUnpainted, ready to paint to suit your street, depot or workshop sceneEnamel paints are recommended
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of 6 N Gauge Single Sided StreetlampsReady To Install Straight Onto Your LayoutThese Are Non-Lit Versions
Height 44mmWidth 1.4mmBase Peg For Installation 1mm Width x 3mm Long
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Slateford Carriage Siding Maintenance Platform Kit (62cm) Mega Pack - OO GaugeCreate Your Own Carriage Sidings With These Maintenance & Cleaning Platform Kit, This Is Modelled From Slateford Carriage Sidings Near EdinburghPack Includes:1 x Slateford Carriage Siding Maintenance Platform Kit (62cm) Including Steps - OO GaugeContaining:1 x Self Adhesive Wrap Around Pre-Cut Sticker Sheet For Platform Tops (2 Stickers)2 x Platform Tops 310mm Long x 28mm Wide14 x White Concrete Platform Supports2 x Platform Steps3 x Slateford Carriage Siding Maintenance Platform Kit (62cm) - Extension Pack - OO GaugeContaining:3 x Self Adhesive Wrap Around Pre-Cut Sticker Sheet For Platform Tops (6 Stickers)6 x Platform Tops 310mm Long x 28mm Wide42 x White Concrete Platform SupportsThis Mega Pack Give You A Total Length Of: 248cm!Customise to your preference with length and additional length packs (62cm) without steps also available in our store.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Slateford Carriage Siding Maintenance Platform Kit (62cm) - Extension PackExtend Our Modern Slateford Carriage Sidings With These Maintenance & Cleaning Platform Kit, This Is Modelled From Slateford Carriage Sidings Near EdinburghPack Includes:1 x Self Adhesive Wrap Around Pre-Cut Sticker Sheet For Platform Tops (2 Stickers)
2 x Platform Tops 310mm Long x 28mm Wide
14 x White Concrete Platform Supports (unpainted)
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Slateford Carriage Siding Platform Kit (62cm) & 2 Sets Of StepsCreate Your Own Carriage Sidings With These Maintenance & Cleaning Platform Kit, This Is Modelled From Slateford Carriage Sidings Near EdinburghPack Includes:1 x Self Adhesive Wrap Around Pre-Cut Sticker Sheet For Platform Tops (2 Stickers)
2 x Platform Tops 310mm Long x 28mm Wide
14 x White Concrete Platform Supports (unpainted)
2 x Pre Painted Platform StepsCustomise to your preference with length and additional length packs (62cm) without steps also available in our store.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Slateford Carriage Siding Platform Kit (66cm) & 2 Sets Of StepsCreate Your Own Carriage Sidings With These Maintenance & Cleaning Platform Kit, This Is Modelled From Slateford Carriage Sidings Near EdinburghPack Includes:6 x Grey Platform Tops 110mm Long x 12mm Wide With White Concrete Supports
2 x Sets of Platform Steps (unpainted)
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of 4 Small Cable Drums on Stands for your Workshop or DepotOO GaugePack of 4 Small Cable Drums on StandsOO GaugePack includes:-4 - Small Cable Drums wound with varying amounts of Cable mounted on a Trestle StandsUnpainted, ready to paint to suit your depot or workshop scene
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Concrete Lineside Huts, smaller type. TT:120 ScalePack of 3, including 3 different styles of hut.Smaller Type Concrete Lineside Huts, seen all over the railway network; often in yards, depots or carriage sidings.TT:120 ScalePack of 3 huts-- 1 with door on the right (15mm x 23mm x 17mm high)- 1 with door in the centre (14mm x 17mm x 16mm high)- 1 with door on the right (17mm x 20mm x 17mm high)Supplied unpainted, a coat of primer is recommended before painting to suit your layout.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Small Inspection Platforms for your depot. OO Gauge. Pack of 2 platforms (1 LH, 1 RH)Small Locomotive Inspection PlatformsPack of 2 platforms- 1 Left Hand Steps- 1 Right Hand StepsOO GaugeUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Solder Mate, Helps Hold Wires When Soldering Together Leaving Free Hand For Soldering Iron & Other For Solder
Catch Cup At Bottom To Catch Any Excess SolderSolder Mate, Helps Hold Wires When Soldering Together Leaving Free Hand For Soldering Iron & Other For Solder
Catch Cup At Bottom To Catch Any Excess Solder
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment Structures Kit – Southern Region 750v DC Style Single Track Cantilever type Masts, Incl. Magnetic Bases and Registration Arms.Pack of 3 Masts KitTypical of a type fitted to various Southern Region depots and yards.PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E13-1 - product code 4WH0901301Detailed Overhead Line Equipment Structure Kit – 3 x Southern Region 750v DC Style Single Track Cantilever type Masts, typical of a type fitted to various Southern Region depots and yards including Hither Green, Hoo Junction and Ashford (Chart Leacon).
PLEASE READ THE FULL PRODUCT DESCRIPTION BELOW
OO Gauge SET E13-1 - product code 4WH0901301
This set E13-1 includes parts to construct Three (3) Single Track Cantilever Masts.
Mast Bases are included in the kit, with magnets to fit into the bases and OHLE structures. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.Registration Arm magnets are included should you wish to attach a contact wire [wires are not included in this kit]
Each Mast Kit has a number of parts that are supplied unpainted on sprues. Preparation and assembly with glue is required. Before painting it is recommended to apply a light coat of primer. Instructions are available on-line or paper copy by special request only at the time of ordering. Glue and paint is not included.A length of 0.5mm wire rod is included to form the top brace of each mast, for fitting between the mast and the registration arm during assembly.
OHLE Structures kit (SET E13-1) dimensions:-
• Overall height or each mast above baseboard (including base) - 109mm
• Overall length of each mast structure (across the tracks) - 62mm
• Overall width of each mast structure - 14mm
• Nominal height of contact wire (if fitted to Magnetic Registration Arm) - 79mm above baseboard [wires not included]
Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
OO gauge Square Wooden Knee Rail FencingSeen Commonly Around Depots, Car Parks, Retain Parks, Play Parks Roadsides & More!Easy Assembly With Desired Adhesive, Superglue/Card GlueIncludes Assembly Jig See Pictures
Pack Compromises Of 14 Lengths Over 2.5m In Length Per Pack7.5mm high x 184mm LengthsOO Gauge
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Stainless Steel Reflective style bollards are commonly used for traffic management and pedestrian safety in public spaces. streets, car parks or station forecourts. OO Gauge. Pack of 10 BollardsStainless Steel Reflective style Bollards for your Street, Car Park or Station Forecourt Scenes.OO GaugePack of 10, Supplied in Silver With Yellow Reflective Bands, No Painting Required.
