In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Many lamps used on railway platforms, in adjacent streets and in car parks also have speakers or security cameras. This pack includes 12 finely detailed 4mm scale camera/speaker units to fit to our Legacy modern lamps (or any lamp with a 2mm diameter post).
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
The pack includes 1 Lifting Spreader Beam and 4 Flexible High Tension Lifting CablesOO GaugeLifting Beam & Wire Lifting Cables, Great Addition For Any Workshop, Used For Balancing While Lifting Heavy Object Like Power Unit's / Bogies EtcOften Seen Laid Around Depots & Workshops EtcOO GaugeThe pack includes one (1) Lifting Spreader Beam & four (4) Flexible High Tension Lifting Cables Made From RubberSupplied unpainted, a light coat of primer is recommended before painting as desired to suit your layout.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
This is a LIMITED EDITION, one of only 100 models to be produced, each with an individually numbered presentation plaque and certificate.Superbly detailed model of a Class 55 Deltic power unit for your desk, includes mounting plinth. Produced to order, please see full description below.1/32 Scale (Gauge 1) - UnpaintedDesk Accessory - one Class 55 Deltic power unit in 1/32 Scale, with mounting plinth.This is a LIMITED EDITION item - only 100 models will be made, each is supplied with an individually numbered presentation plaque and certificate.Overall size (including mounting plinth) 8.7cm x 14.6cm x 9.4cm high.These highly detailed models are Made to Order and Normally Dispatched Within 7-10 days.This model is supplied unpainted, on the print sprue, and will need to be carefully removed by using fine Sprue Cutters. Once removed from the sprue you can display the model as it is on the supplied mounting plinth; or if preferred a light coat of primer may be applied before painting as desired using acrylic or enamel paints.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Lineside Electrical Cabinets. N Gauge. Pack of 10.Lineside Electrical CabinetsN GaugeDetailed Locks & VentilationPack of 10 Consisting of:-- 2 Triple Cabinet- 4 Dual Cabinets- 4 Single CabinetsUnpainted, ready for painting to suit your lineside installation.Enamel paints are recommended.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Lineside Electrical Cabinets. O Gauge. Pack of 3, one single, one double and one triple cabinet.Lineside Electrical CabinetsO GaugeDetailed Locks & VentilationPack of 3 cabinets Consisting of:-- 1 Triple Cabinet- 1 Dual Cabinet- 1 Single CabinetUnpainted, ready for painting to suit your lineside installation.A light coat of primer is recommended before painting with acrylic or enamel paint.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Lineside Electrical Termination Boxes. OO Gauge. Pack of 20Pack of 20 Lineside Electrical Termination BoxesOO Gauge
Electrical Termination Boxes that can be seen throughout the UK rail network
The pack includes:-- 5 (five) x - Small Box with External Detail Wiring- 10 (ten) x - Small Boxes- 5 (five) x - Large Box with External Detail WiringSee picturesUnpainted, ready for painting to suit your lineside installation.Enamel paints are recommended.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Add a bit of detail to your lineside with Gradient sign posts.Supplied in a packs of 8 sign posts with a variety of gradients.N GaugeGradient sign postsSupplied in a packs of 8 sign posts with a variety of gradients N GaugeThe numbering on each post is slightly raised to allow it to be picked-out in black on each sign post.Gradients on the railway are rarely constant over any considerable length, and may change several times within the space of a mile.Gradient signs were first used around 1850 with a sign placed at each location where the gradient of the line changes. Most gradient sign posts located on the lineside have two arms facing the track, one on either side of a post. The arms slant up or down to indicate the direction of the gradient, and have the gradient marked on them.The gradient is expressed as a ratio, e.g. "1 in 200" (or "1:200")that means that the track rises (or drops) one unit for every 200 units travelled horizontally.1 in 200 is therefore a steeper gradient than 1 in 500.Some designs of gradient sign post do not show the first part of the ratio so 1 in 200 is shown merely as “200”.In general gradient sign posts are painted white with black lettering, however from the 1970s onwards some are painted yellow.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Add a bit of detail to your lineside with Gradient sign posts.Supplied in a packs of 8 sign posts with a variety of gradients.O GaugeGradient sign postsSupplied in a packs of 8 sign posts with a variety of gradients O GaugeThe numbering on each post is slightly raised to allow it to be picked-out in black on each sign post.Gradients on the railway are rarely constant over any considerable length, and may change several times within the space of a mile.Gradient signs were first used around 1850 with a sign placed at each location where the gradient of the line changes. Most gradient sign posts located on the lineside have two arms facing the track, one on either side of a post. The arms slant up or down to indicate the direction of the gradient, and have the gradient marked on them.The gradient is expressed as a ratio, e.g. "1 in 200" (or "1:200")that means that the track rises (or drops) one unit for every 200 units travelled horizontally.1 in 200 is therefore a steeper gradient than 1 in 500.Some designs of gradient sign post do not show the first part of the ratio so 1 in 200 is shown merely as “200”.In general gradient sign posts are painted white with black lettering, however from the 1970s onwards some are painted yellow.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Add a bit of detail to your lineside with Gradient sign posts.Supplied in a packs of 8 sign posts with a variety of gradients.OO GaugeGradient sign postsSupplied in a packs of 8 sign posts with a variety of gradients OO GaugeThe numbering on each post is slightly raised to allow it to be picked-out in black on each sign post.Gradients on the railway are rarely constant over any considerable length, and may change several times within the space of a mile.Gradient signs were first used around 1850 with a sign placed at each location where the gradient of the line changes. Most gradient sign posts located on the lineside have two arms facing the track, one on either side of a post. The arms slant up or down to indicate the direction of the gradient, and have the gradient marked on them.The gradient is expressed as a ratio, e.g. "1 in 200" (or "1:200")that means that the track rises (or drops) one unit for every 200 units travelled horizontally.1 in 200 is therefore a steeper gradient than 1 in 500.Some designs of gradient sign post do not show the first part of the ratio so 1 in 200 is shown merely as “200”.In general gradient sign posts are painted white with black lettering, however from the 1970s onwards some are painted yellow.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Add a bit of detail to your lineside with Gradient sign posts.Supplied in a packs of 8 sign posts with a variety of gradients.TT:120 ScaleGradient sign postsSupplied in a packs of 8 sign posts with a variety of gradients TT:120 ScaleThe numbering on each post is slightly raised to allow it to be picked-out in black on each sign post.Gradients on the railway are rarely constant over any considerable length, and may change several times within the space of a mile.Gradient signs were first used around 1850 with a sign placed at each location where the gradient of the line changes. Most gradient sign posts located on the lineside have two arms facing the track, one on either side of a post. The arms slant up or down to indicate the direction of the gradient, and have the gradient marked on them.The gradient is expressed as a ratio, e.g. "1 in 200" (or "1:200")that means that the track rises (or drops) one unit for every 200 units travelled horizontally.1 in 200 is therefore a steeper gradient than 1 in 500.Some designs of gradient sign post do not show the first part of the ratio so 1 in 200 is shown merely as “200”.In general gradient sign posts are painted white with black lettering, however from the 1970s onwards some are painted yellow.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of 4 Cabinets with Gas Bottles for Point Heaters. O GaugeLineside Cabinets with Gas Bottles for Point HeatersPack of 4-2 with two gas bottles1 with one gas bottle1 without gas bottles & open doorO Gauge Unpainted
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of 4 Cabinets with Gas Bottles for Point Heaters. OO GaugeLineside Cabinets with Gas Bottles for Point HeatersPack of 4-2 with two gas bottles1 with one gas bottle1 without gas bottles & open doorOO Gauge Unpainted
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Lineside Shoulder Clearance Safety Barriers Kit. OO Gauge. Pack of 3OO Gauge Lineside Shoulder Clearance Safety Barriers (Pack of 3)Plastic Kit - Pre Coloured Silver With Blue HandrailsIncludes Pack of 3 (120mm Long Each, 360mm Total)Attach To Your Sleepers With Glue The First Post Then Each Post After 5 Sleepers Apart Code 100/75 Rail Then Glue Blue Handrails Onto HooksPlease see the instructions pictureThis product will require cutting from the SprueTrim the Base Tab to Suit your Ballast Shoulder height
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Whistle / W and SW Signs.O Gauge.6 speed signs - 2 x "Whistle", 2 x "SW" and 2 x "W".Whistle / W and SW Signs.O Gauge.6 signs - 2 x "Whistle", 2 x "SW" and 2 x "W".These can be easily mounted into a drilled 1.5mm hole in your baseboard
Supplied in yellow, can painted to suit your layout.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of 2 Lineside Loading GaugesN GaugeRailway Loading Gauges are used to ensure that the clearance between the top of a railway vehicle including its load, and any overhead structures, such as bridges, tunnels, or power lines, is sufficient to prevent collisions or damage to the vehicle, its load or the infrastructure.Loading Gauges are commonly used in railway yards, maintenance and loading facilities. Pack of 2 - N GaugeEach Loading Gauge is a 2 part kit, simply de-sprue and slot the post into the base.
Supplied unpainted
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of 2 Lineside Loading GaugesOO GaugeRailway Loading Gauges are used to ensure that the clearance between the top of a railway vehicle including its load, and any overhead structures, such as bridges, tunnels, or power lines, is sufficient to prevent collisions or damage to the vehicle, its load or the infrastructure.Loading Gauges are commonly used in railway yards, maintenance and loading facilities. Pack of 2 - OO GaugeEach Loading Gauge is a 2 part kit, simply de-sprue and slot the post into the base.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of 2 Lineside Loading GaugesTT:120 ScaleRailway Loading Gauges are used to ensure that the clearance between the top of a railway vehicle including its load, and any overhead structures, such as bridges, tunnels, or power lines, is sufficient to prevent collisions or damage to the vehicle, its load or the infrastructure.Loading Gauges are commonly used in railway yards, maintenance and loading facilities. Pack of 2 - TT:120 ScaleEach Loading Gauge is a 2 part kit, simply de-sprue and slot the post into the base.
Supplied unpainted.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Loco / Tender Drawbars for Hornby 9F (OO Gauge 2022 Release only)
Pack includes 3 drawbars of different lengths that can be used to replace the original to provide an alternative locomotive to tender spacing.
PLEASE READ the Description below and take a look at the pictures.Loco / Tender Drawbars for Hornby 9F (2022 Release only)OO GaugePack includes 3 drawbars of different lengths that can be used to replace the original to provide an alternative locomotive to tender spacing.PLEASE READ the *** NOTES *** BELOW and take a LOOK at the PICTURESThe original drawbar has only 2 settings, long and very short. The long setting in our opinion is visually a little too long and could be closed up if your track curves are less severe than 2nd Radius; whilst the very short setting does look good this is really only suited for display and will not negotiate anything sharper than very large radii curves.We have therefore produced a pack of 3 alternatives to provide some 'in-between' options for a better visual appearance whilst maintaining the ability to operate; the pack includes:-- Short – 13.8mm mounting hole centres,- Intermediate – 14.8mm mounting hole centres,- Standard – 15.3mm mounting hole centres.For comparison the original drawbar has approx.12.8mm mounting hole centres in the very short position and approx.16.6mm mounting hole centres in the long position.As to which drawbar will be suited to your 9F on your layout, this may involve some trial which is why we supply the pack of 3 alternatives.What we can say from trials with these drawbars fitted to our 9F, operating on our layout, is:-- the Short 13.8mm drawbar has worked well on 4th Radius curves- the Intermediate 14.8mm drawbar has worked well on 3rd Radius curves*** NOTE 1 *** you are likely to have to carry out a trial yourself, to ensure that the loco / tender spacing is set suitably for your own layout trackwork.*** NOTE 2 *** these drawbars are made from plastic and are therefore not going to be as strong or able to take abuse in the same way that the metal original would.*** NOTE 3 *** these drawbars are suitable for normal running on layouts, however care must be taken not to put undue strain on the drawbar when handling the model.*** NOTE 4 *** the drawbars have been successfully strength tested with our 9F hauling a 75 wagon train on a layout with gradients.*** NOTE 5 *** The drawbars should be fitted/removed as per the Hornby instructions.*** NOTE 6 *** These drawbars fit the 2022 Release Hornby 9F OO Gauge locomotives.*** NOTE 7 *** These drawbars may be suitable for fitting to some other Hornby locomotives.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Locomotive Depot Load Bank Kit - see DescriptionN GaugeLocomotive Depot Load Bank KitN Gauge
What is a Load Bank?A load bank is a piece of electrical test equipment used to simulate an electrical load, to test an electric power source without connecting it to its normal operating load.A locomotive would be positioned on one of the diesel test roads alongside the test monitoring building.Output power cables from the engines generator would be disconnected and joined to external cables that were part of a load bank.A load bank consists of resistances. This is so that the heat generated by the electrical energy can be dispersed.The output from the generator is checked at various loads which is done by increasing the resistance in the load bank.Current and voltage are measured on meters located inside the Test House. The horsepower of the engine could also be set.You can now model a load bank setup with this kit, a great addition to any TMD on your layout.Included In The Locomotive Depot Load Bank Kit:1 x MDF Concrete Base With Pre-cut Holes For Safety Fencing & Barrier (unpainted)1 x set of Safety Fencing and Barrier in Yellow4 x Electrical Cabinets (unpainted)1 x Detailed Load Bank Container (unpainted)Footprints For This Kit Are As Follows:5.9cm Deep x 20.5cm LongAdditional Recommended Items- - 1 x Locomotive Inspection Platform- 1 x Depot Buffer Stop
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Locomotive Depot Load Bank Kit - see DescriptionOO GaugeLocomotive Depot Load Bank KitOO Gauge
What is a Load Bank?A load bank is a piece of electrical test equipment used to simulate an electrical load, to test an electric power source without connecting it to its normal operating load.A locomotive would be positioned on one of the diesel test roads alongside the test monitoring building.Output power cables (included in kit) from the engines generator would be disconnected and joined to external cables that were part of a load bank.A load bank consists of resistances. This is so that the heat generated by the electrical energy can be dispersed.The output from the generator is checked at various loads which is done by increasing the resistance in the load bank.Current and voltage are measured on meters located inside the Test House. The horsepower of the engine could also be set.You can now model a full load bank setup with this kit, a great addition to any TMD on your layout.Included In The Locomotive Depot Load Bank Kit:1 x 3 Part MDF Concrete Base With Pre-cut Holes For Safety Fencing & Barrier (unpainted)2 x Electrical Cabinets (unpainted)1 x Detailed Load Bank Container (unpainted)1 x Reel Of PipingFootprints For This Kit Are As Follows:11cm Deep x 38cm LongAdditional Recommended Items- - 2 x Small Locomotive Access Steps- 1 x Short Depot Buffer Stop
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
3Locomotive Inspection Platforms. O Gauge. Pack of 2 platforms (1 LH, 1 RH).Locomotive Inspection PlatformsPack of 2 platforms- 1 Left Hand- 1 Right Hand
O GaugeUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Locomotive Inspection Platforms. OO Gauge. Pack of 2 platforms (1 LH, 1 RH).Locomotive Inspection PlatformsPack of 2 platforms- 1 Left Hand- 1 Right Hand
OO GaugeUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Locomotive Side Rods & Stand, including 8 Side RoadsOO GaugeLocomotive Side Rods & StandOO GaugeStand Including 8 Side Roads (4 Front Mounted, 4 Rear Mounted)Provided UnpaintedReal Picture Taken At Scunthorpe Steel Works Attached
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Locomotive StandsTypical of those used to support a locomotive during manufacture, overhaul or whilst undergoing bogie maintenance / exchange.Pack of 4 stands (2 types, 2 of each type)OO GaugeLocomotive Stands - 2 Types (Pack of 4)Often Seen Around Depot's & Workshops Or Even Outside Them.These are used to support a locomotive during manufacture, overhaul or whilst undergoing bogie maintenance / exchangeOO GaugePack includes:- Four (4) Locomotive Stands of 2 Different Types (1 Pair of Each)Supplied unpainted, a light coat of primer is recommended before painting as desired to suit your layout.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Locomotive & Coach Inspection Platforms. N Gauge. Pack of 4 platforms (2 Large, 2 Small).Locomotive & Coach Inspection PlatformsN GaugePack of 4 platforms-- 2 Left Hand - 1 Small (e.g. for Coaches) & 1 Large (e.g. for Locomotives) - 2 Right Hand - 1 Small (e.g. for Coaches) & 1 Large (e.g. for Locomotives) Great Detail For Any N Gauge LayoutUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Locomotive & Coach Inspection Platforms. TT:120 Scale. Pack of 4 platforms (2 Large, 2 Small).Locomotive & Coach Inspection PlatformsTT:120 ScalePack of 4 platforms-- 2 Left Hand - 1 Small (e.g. for Coaches) & 1 Large (e.g. for Locomotives) - 2 Right Hand - 1 Small (e.g. for Coaches) & 1 Large (e.g. for Locomotives) Great Detail For Any N Gauge LayoutUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Add some detail to your trackwork with these long welded rail expansion joints. Pack of 2.Suitable for Peco Streamline Code 100 rail.On the real railway these expansion joints are used between sections of continuously welded rail.These OO Gauge models are designed to suit Peco Streamline Code 100 rail.Pack of 2 expansion jointsSupplied unpainted; a light coat of primer is recommended before painting / weathering to suit your lineside.
These parts are designed to fit to the Code 100 rail following removal of four Peco moulded sleepers; ensure there are no burrs on the rail ends, slide the rails into the expansion joints, then replace the sleepers on the other side to create a continuous rail across the track feature.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Add some detail to your trackwork with these long welded rail expansion joints. Pack of 2.Suitable for Peco Streamline Code 75 rail.On the real railway these expansion joints are used between sections of continuously welded rail.These OO Gauge models are designed to suit Peco Streamline Code 75 rail.Pack of 2 expansion jointsSupplied unpainted; a light coat of primer is recommended before painting / weathering to suit your lineside.
These parts are designed to fit to the Code 75 rail following removal of four Peco moulded sleepers; ensure there are no burrs on the rail ends, slide the rails into the expansion joints, then replace the sleepers on the other side to create a continuous rail across the track feature.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack Includes 2 Pairs Of Magnetic Corner Clamps, Available In Orange Or Black
Simply pull apart, place inside and outside your 90 degree corner and snap into place.
The snap and glue set squares hold the two pieces of plastic/card/wood in place and allow you to glue them at the right angle without further worry.
After curing of the adhesive do remove easily the Snap & Glue angle magnets for that perfect 90 degree angle.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Magnetic Pile Driven style base kit for Overhead Line Equipment Structures - SERIES 1 Twin Track Cantilever typeOO GaugeSET E2-6 - product code 4WH0900206Kit included 1 BASE, 2 SPACERS and 2 MAGNETS - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWMagnetic Pile Driven style base kit for Overhead Line Equipment Structures - SERIES 1 Twin Track Cantilever typeBASE with MAGNETS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-6 - product code 4WH0900206This set E2-6 includes 1 Pile Driven style Base, 2 Spacers and 2 Magnets. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - these bases are suitable for mounting the Overhead Line Equipment Structures of the SERIES 1 Twin Track Cantilever type (SETs E2-1 to E2-5).
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Magnetic Pile Driven style base kit for Overhead Line Equipment Structures - SERIES 2 - Two Track Cantilever typeOO GaugeSET E4-9 - product code 4WH0900409Kit included 1 BASE, 2 SPACERS with 2 MAGNETS - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWMagnetic Pile Driven style base kit for Overhead Line Equipment Structures - SERIES 2 - Two Track Cantilever typeBASE with MAGNETS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-9 - product code 4WH0900409This set E4-9 includes 1 Pile Driven style Base, 2 spacers with 2 magnets. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - these bases are suitable for mounting the Overhead Line Equipment Structures of the SERIES 2 - Two Track Cantilever type (SETs E4-1 to E4-3).
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment 2 x MAGNETIC Registration Arms kit LEFT HAND for fitting to the SERIES 2 - Two Track Cantilever OHLEOO Gauge
SET E4-6 - product code 4WH0900406Pack of 2 MAGNETIC Registration Arms that can support the fitting of contact wires (not included)REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment - 2 MAGNETIC Registration Arms LEFT HAND for fitting to the SERIES 2 - Two Track Cantilever OHLEREGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-6 - product code 4WH0900406
This set E4-6 includes TWO (2) MAGNETIC Type Left Handed Registration Arms that are intended for fitting to the SERIES 2 - Two Track Cantilever kits (SETs E4-1 to E4-3)PLEASE NOTE that this registration arm kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included.
PLEASE NOTE each registration arm has 2 magnets which will need to be fitted into the registration arms
Other types of registration arms for the SERIES 2 - Two Track Cantilever kits are available as follows:-
SET E4-4 Left Hand Registration Arm (Series 2)
SET E4-5 Right Hand Registration Arm (Series 2)
SET E4-7 Right Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment 2 x MAGNETIC Registration Arms kit RIGHT HAND for fitting to the SERIES 2 - Two Track Cantilever OHLEOO Gauge
SET E4-7 - product code 4WH0900407Pack of 2 MAGNETIC Registration Arms that can support the fitting of contact wires (not included)REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment - 2 MAGNETIC Registration Arms RIGHT HAND for fitting to the SERIES 2 - Two Track Cantilever OHLEREGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E4-7 - product code 4WH0900407
This set E4-7 includes TWO (2) MAGNETIC Type Right Handed Registration Arms that are intended for fitting to the SERIES 2 - Two Track Cantilever kits (SETs E4-1 to E4-3)PLEASE NOTE that this registration arm kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included.PLEASE NOTE each registration arm has 2 magnets which will need to be fitted into the registration arms
Other types of registration arms for the SERIES 2 - Two Track Cantilever kits are available as follows:-
SET E4-4 Left Hand Registration Arm (Series 2)
SET E4-5 Right Hand Registration Arm (Series 2)
SET E4-6 Left Hand Registration Arm (SERIES 2 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment 2 x MAGNETIC Registration Arms kit LEFT HAND for fitting to the SERIES 1 Mono-Boom Anchor Portal kitOO Gauge
SET E1-5 - product code 4WH0900105Pack of 2 MAGNETIC Registration Arms that can support the fitting of contact wires (not included)REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment - 2 MAGNETIC Registration Arms LEFT HAND for fitting to the SERIES 1 Mono-Boom Anchor Portal kitREGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E1-5 - product code 4WH0900105
This set E1-5 includes TWO (2) MAGNETIC Type Left Handed Registration Arms that are intended for fitting to the SET E1-1 Mono-Boom Anchor Portal Structure kit.PLEASE NOTE that this registration arm kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included.
PLEASE NOTE the Magnets will need to be fitted into the registration arms
Other types of registration arms are available as follows:-
SET E1-3 Left Hand Registration Arm (basic)
SET E1-4 Right Hand Registration Arm (basic)
SET E1-6 Right Hand Registration Arm (magnetic type to allow fitting of Peco type OHL contact wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment 2 x MAGNETIC Registration Arms kit RIGHT HAND for fitting to the SERIES 1 Mono-Boom Anchor Portal kitOO Gauge
SET E1-6 - product code 4WH0900106Pack of 2 MAGNETIC Registration Arms that can support the fitting of contact wires (not included)REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment - 2 MAGNETIC Registration Arms RIGHT HAND for fitting to the SERIES 1 Mono-Boom Anchor Portal kitREGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E1-6 - product code 4WH0900106
This set E1-6 includes TWO (2) MAGNETIC Type Right Handed Registration Arms that are intended for fitting to the SET E1-1 Mono-Boom Anchor Portal Structure kit.PLEASE NOTE that this registration arm kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included.
PLEASE NOTE the Magnets will need to be fitted into the registration arms
Other types of registration arms are available as follows:-
SET E1-3 Left Hand Registration Arm (basic)
SET E1-4 Right Hand Registration Arm (basic)
SET E1-5 Left Hand Registration Arm (magnetic type to allow fitting of Peco type OHL contact wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment 2 x MAGNETIC Registration Arms kit LEFT HAND for fitting to the SERIES 1 Twin Track Cantilever OHLEOO Gauge
SET E2-12 - product code 4WH0900212Pack of 2 MAGNETIC Registration Arms that can support the fitting of contact wires (not included)REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment - 2 MAGNETIC Registration Arms LEFT HAND for fitting to the SERIES 1 Twin Track Cantilever OHLEREGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-12 - product code 4WH0900212
This set E2-12 includes TWO (2) MAGNETIC Type Left Handed Registration Arms that are intended for fitting to the SERIES 1 Twin Track Cantilever kits (SETs E2-1 to E2-5)PLEASE NOTE that this registration arm kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included.
PLEASE NOTE the Magnets will need to be fitted into the registration arms
Other types of registration arms are available as follows:-
SET E2-9 Left Hand Registration Arm (Series 1)
SET E2-10 Right Hand Registration Arm (Series 1)
SET E2-11 Combined Left & Right Hand Registration Arms (Series 1)
SET E2-13 Right Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E2-14 Combined Left & Right Hand Registration Arms (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Detailed Overhead Line Equipment 2 x MAGNETIC Registration Arms kit RIGHT HAND for fitting to the SERIES 1 Twin Track Cantilever OHLEOO Gauge
SET E2-13 - product code 4WH0900213Pack of 2 MAGNETIC Registration Arms that can support the fitting of contact wires (not included)REGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWDetailed Overhead Line Equipment - 2 MAGNETIC Registration Arms RIGHT HAND for fitting to the SERIES 1 Twin Track Cantilever OHLEREGISTRATION ARMS only - PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWOO Gauge SET E2-13 - product code 4WH0900213
This set E2-13 includes TWO (2) MAGNETIC Type Right Handed Registration Arms that are intended for fitting to the SERIES 1 Twin Track Cantilever kits (SETs E2-1 to E2-5)PLEASE NOTE that this registration arm kit includes Magnets to support the fitting of Peco type OHL contact wires, NOTE the contact wires are NOT included.
PLEASE NOTE the Magnets will need to be fitted into the registration arms
Other types of registration arms are available as follows:-
SET E2-9 Left Hand Registration Arm (Series 1)
SET E2-10 Right Hand Registration Arm (Series 1)
SET E2-11 Combined Left & Right Hand Registration Arms (Series 1)
SET E2-12 Left Hand Registration Arm (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
SET E2-14 Combined Left & Right Hand Registration Arms (SERIES 1 magnetic type to allow fitting of Peco type OHL wires) note [wires are not included]
All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Mail Bags. N Gauge. Pack of 14Pack of 14 Mail BagsN GaugeIdeal Addition For Our Tugs & Mail Trolleys, Often Used Throughout The British Postal NetworkThese are supplied UnpaintedTrolleys are NOT included, and are available separately.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Mail Bags. O Gauge. Pack of 5Pack of 5 Mail BagsO GaugeIdeal Addition For Our Tugs & Mail Trolleys, Often Used Throughout The British Postal NetworkThese are supplied UnpaintedTrolleys are NOT included, and are available separately.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Mail Bags. OO Gauge. Pack of 14Pack of 14 Mail BagsOO GaugeIdeal Addition For Our Tugs & Mail Trolleys, Often Used Throughout The British Postal NetworkThese are supplied UnpaintedTrolleys are NOT included, and are available separately.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Mail Bags. TT:120 Scale. Pack of 14Pack of 14 Mail BagsTT:120 ScaleIdeal Addition For Our Tugs & Mail Trolleys, Often Used Throughout The British Postal NetworkThese are supplied UnpaintedTrolleys are NOT included, and are available separately.
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Mechanical Point Lock Kits. OO Gauge. Pack of 10 (5 x Right Handed and 5 x Left Handed)Designed to fit PECO Medium Radius Code 100 PointsMechanical Point Lock Kit Pack for 10 Point (5 x Right Handed and 5 x Left Handed)OO GaugeThese kits are designed to fit PECO Medium Radius Code 100 Points SL-95/96, SL-E95/96Pack Includes for the installation on 10 points:-- 5 Left Hand Co-acting Braces- 5 Right Hand Co-acting Braces- 20 Point Clamp Locks- 10 Raised Point Control UnitsUnpainted, ready for painting to suit your installation.The picture provides an example of how they could be painted and installed
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Mechanical Point Lock/Tie Covers - for Code 100 Track. OO Gauge. Pack of 10.Mechanical Point Lock/Tie Covers OO Gauge Pack of 10 - for Code 100 TrackSeen Across The Country From 1800's - Present Day On Mainline's/Depots/ StationsProtective Point Tie Covers, Supplied Pre-Coloured In BrownMade From Durable Plastic MaterialTo Fit Peco Code 100 TrackPack of 10: 5 Long / 5 Short
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Mesh Type Trolleys for use in Workshops / Depots Pack of 4OO GaugeMesh Type Trolleys for use in Workshops / Depots A pack of 4 (four)OO GaugeUnpainted, ready to paint to suit your depot or workshop sceneEnamel paints are recommended
In Stock
Shipped By Royal Mail 48 Tracked Item Will be Dispatched Using Royal Mail 48 Hour Tracked Service From Dispatch Time
Pack of 10 Metal Waste BinsIdeal for Depots/Households and FactoriesO GaugePack of 10 Waste Bins - Ideal For Depots/Households and FactoriesO GaugeSupplied unpainted, Recommended Spray Silver or weather, use primer first
