1500v DC Catenary - N Gauge (Set E12)

Detailed N-Gauge Overhead Line Equipment - Registration Arms and Catenary Wire Supports for 1500vDC I-Beam Type Structures Typical of a type fitted to the Woodhead and Great Eastern Main Line routes.SET E12-23 - product code 2WH0901223PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWThis set is specifically designed to be used with our 1500vDC OHLE I-Beam structure kit E12-21 (not included).This set E12-23 includes the following parts:- - Two (2) Registration Arms  - Two (2) Catenary Wire Supports The Registration Arms and Catenary Wire Supports slide on the to your 1500vDC I-Beam Structure span during assembly, they may need to be secured with a very small spot of glue. All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less

Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - 1500vDC I-Beam type Structure Kit with 90mm Span for up to 2 Tracks, typical of a type fitted to the Woodhead and Great Eastern Main Line routes, incl. Magnetic Bases. PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E12-21 - product code 2WH0901221This set E12-21 includes parts to construct one (1) 1500vDC I-Beam type structure for up to 2 Tracks (2 Masts, 2 Bases and 1 Span section).  The two Bases included in the kit come with magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the 1500vDC OHLE are available to Purchase Separately as follows:- SET E12-23 - 1500vDC Registration Arms and Catenary Wire Supports for I-Beam Type Structures (SET E12-23) - product code 2WH0901223 All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E12-21) dimensions:- Maximum height above baseboard (including base) - 59mm Overall length of structure (across the tracks) - 104mm Max width of structure/base - 8mm Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less

Detailed N-Gauge Overhead Line Equipment - Pack of 2 Span Extensions (25mm) for 1500vDC I-Beam Type Structures Typical of a type fitted to the Woodhead and Great Eastern Main Line routes.SET E12-22 - product code 2WH0901222PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWThis set is specifically designed to be used with our 1500vDC OHLE I-Beam structure kit E12-21 (not included).This set E12-22 includes the following parts:- - Two (2) Span Extensions (25mm each)  All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less

Detailed N-Gauge Overhead Line Equipment - Registration Arms and Catenary Wire Supports for 1500vDC A-Frame Type Structures Typical of a type fitted to the Woodhead and Great Eastern Main Line routes.SET E12-16 - product code 2WH0901216PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWThis set is specifically designed to be used with our 1500vDC OHLE structure kits E12-10 and E12-11 (not included).This set E12-16 includes the following parts:- - Two (2) Registration Arms  - Two (2) Catenary Wire Supports The Registration Arms are fitted to the underside of the span and the Catenary Wire Supports on the top of the span of your assembled 1500vDC Lattice Structure and may need to be attached with a very small spot of glue. All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less

Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - 1500vDC A-Frame type Structure Kit with 130mm Span for up to 4 Tracks, typical of a type fitted to the Woodhead and Great Eastern Main Line routes, incl. Magnetic Bases. PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E12-11 - product code 2WH0901211This set E12-10 includes parts to construct one (1) 1500vDC A-Frame type structure for up to 4 Tracks (2 Masts, 4 Bases and 1 Span section).  The four Bases included in the kit come with magnets to fit into two of the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the 1500vDC OHLE are available to Purchase Separately as follows:- SET E12-16 - 1500vDC Registration Arms and Catenary Wire Supports for A-Frame Type Structures (SET E12-16) - product code 2WH0901216 All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E12-11) dimensions:- Maximum height above baseboard (including base) - 56mm Overall length of structure (across the tracks) - 145mm Max width of structure/base - 22mm Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less

Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - 1500vDC A-Frame type Structure Kit with 75mm Span for up to 2 Tracks, typical of a type fitted to the Woodhead and Great Eastern Main Line routes, incl. Magnetic Bases. PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E12-10 - product code 2WH0901210This set E12-10 includes parts to construct one (1) 1500vDC A-Frame type structure for up to 2 Tracks (2 Masts, 4 Bases and 1 Span section).  The four Bases included in the kit come with magnets to fit into two of the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the 1500vDC OHLE are available to Purchase Separately as follows:- SET E12-16 - 1500vDC Registration Arms and Catenary Wire Supports for A-Frame Type Structures (SET E12-16) - product code 2WH0901216 All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E12-10) dimensions:- Maximum height above baseboard (including base) - 56mm Overall length of structure (across the tracks) - 91mm Max width of structure/base - 22mm Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less

Detailed N-Gauge Overhead Line Equipment - Registration Arms and Catenary Wire Supports for 1500vDC Lattice Type Structures Typical of a type fitted to the Woodhead and Great Eastern Main Line routes.SET E12-6 - product code 2WH0901206PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWThis set is specifically designed to be used with our 1500vDC OHLE structure kits E12-1, E12-2 and E12-3 (not included).This set E12-6 includes the following parts:- - Two (2) Registration Arms  - Two (2) Catenary Wire Supports The parts are fitted to the underside of the span of your assembled 1500vDC Lattice Structure and may need to be attached with a very small spot of glue. All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less

Detailed N-Gauge Overhead Line Equipment - Pack of 2 Span Extensions (60mm) for 1500vDC Lattice Type Structures Typical of a type fitted to the Woodhead and Great Eastern Main Line routes.SET E12-7 - product code 2WH0901207PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWThis set is specifically designed to be used with our 1500vDC OHLE structure kits E12-1, E12-2 and E12-3 (not included).This set E12-7 includes the following parts:- - Two (2) Span Extensions (60mm each)  All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less

Detailed N-Gauge Overhead Line Equipment - Pack of 2 Cantilever Spans (40mm) for 1500vDC Lattice Type Structures Typical of a type fitted to the Woodhead and Great Eastern Main Line routes.SET E12-8 - product code 2WH0901208PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWThis set is specifically designed to be used with the masts of our 1500vDC OHLE structure kits E12-1, E12-2, E12-3, E12-4 and E12-5 (not included).This set E12-8 includes the following parts:- - Two (2) Cantilever Spans (40mm each)  All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less

Detailed N-Gauge Overhead Line Equipment - Pack of 2 Additional Spans (78mm) for 1500vDC Lattice Type Structures Typical of a type fitted to the Woodhead and Great Eastern Main Line routes.SET E12-9 - product code 2WH0901209PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWThis set is specifically designed to be used with our 1500vDC OHLE structure kits E12-1, E12-2, E12-3, E12-4 and E12-5 (not included).This set E12-9 includes the following parts:- - Two (2) Additional Spans (78mm each)  All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less

Detailed N-Gauge Overhead Line Equipment Platform Mast Structure Kit - 1500vDC Lattice type Double Sided Mast for Platforms, typical of a type fitted to the Woodhead and Great Eastern Main Line routes, incl. Magnetic Base, PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E12-4 - product code 2WH0901204This set E12-4 includes parts to construct one (1) 1500vDC Lattice type Double Sided Platform mast  (1 Mast, 1 Base).  The Base included in the kit come with magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.This Double Sided Platform Mast is designed specifically to be used between multiple E12-3 structure kits to create an OHLE structure across multiple platforms.PLEASE NOTE - the registration arms are NOT included and should be purchased separately. All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer. Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E12-4) dimensions:- Maximum height above your platform (including base) - 52mm Overall length of structure (across the tracks) - 36mm Max width of structure/base - 8mm Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less

Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - 1500vDC Lattice type Platform Structure Kit with 100mm Span for up to 2 Tracks, typical of a type fitted to the Woodhead and Great Eastern Main Line routes, incl. Magnetic Bases. PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E12-3 - product code 2WH0901203This set E12-3 includes parts to construct one (1) 1500vDC Lattice type Platform structure for up to 2 Tracks (2 Masts, 2 Bases and 1 Span section).  The two Bases included in the kit come with magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the 1500vDC OHLE are available to Purchase Separately as follows:- SET E12-6 - 1500vDC Registration Arms and Catenary Wire Supports for Lattice Type Structures (SET E12-6) - product code 2WH0901206 All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E12-3) dimensions:- Maximum height above your platform (including base) - 52mm Overall length of structure (across the tracks) - 114mm Max width of structure/base - 8mm Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less

Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - 1500vDC Lattice type Double Sided Mast, typical of a type fitted to the Woodhead and Great Eastern Main Line routes, incl. Magnetic Base, PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E12-5 - product code 2WH0901205This set E12-5 includes parts to construct one (1) 1500vDC Lattice type Double Sided mast  (1 Mast, 1 Base).  The Base included in the kit come with magnets to fit into the base and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.This Double Sided Mast is designed specifically to be used between multiple E12-1 or E12-2 structure kits to create an OHLE structure across multiple tracks.PLEASE NOTE - the registration arms are NOT included and should be purchased separately. All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer. Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E12-5) dimensions:- Maximum height above baseboard (including base) - 62mm Overall length of structure (across the tracks) - 36mm Max width of structure/base - 8mm Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less

Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - 1500vDC Lattice type Structure Kit with 130mm Span for up to 4 Tracks, typical of a type fitted to the Woodhead and Great Eastern Main Line routes, incl. Magnetic Bases. PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E12-2 - product code 2WH0901202This set E12-2 includes parts to construct one (1) 1500vDC Lattice type structure for up to 4 Tracks (2 Masts, 2 Bases and 1 Span section).  The two Bases included in the kit come with magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the 1500vDC OHLE are available to Purchase Separately as follows:- SET E12-6 - 1500vDC Registration Arms and Catenary Wire Supports for Lattice Type Structures (SET E12-6) - product code 2WH0901206 All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E12-2) dimensions:- Maximum height above baseboard (including base) - 62mm Overall length of structure (across the tracks) - 146mm Max width of structure/base - 8mm Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less

Detailed N-Gauge Overhead Line Equipment Mast Structure Kit - 1500vDC Lattice type Structure Kit with 75mm Span for up to 2 Tracks, typical of a type fitted to the Woodhead and Great Eastern Main Line routes, incl. Magnetic Bases. PLEASE READ THE FULL PRODUCT DESCRIPTION BELOWN Gauge SET E12-1 - product code 2WH0901201This set E12-1 includes parts to construct one (1) 1500vDC Lattice type structure for up to 2 Tracks (2 Masts, 2 Bases and 1 Span section).  The two Bases included in the kit come with magnets to fit into the bases and OHLE structure. The use of magnets allows the OHLE structures to be easily removed and re-fitted on your layout.PLEASE NOTE - the registration arms are NOT included and should be purchased separately.N-Gauge Registration Arm options for the 1500vDC OHLE are available to Purchase Separately as follows:- SET E12-6 - 1500vDC Registration Arms and Catenary Wire Supports for Lattice Type Structures (SET E12-6) - product code 2WH0901206 All parts are supplied unpainted; before painting it is recommended to apply a light coat of primer.Regarding the spacing of OHLE masts, the real railway mast spacing can be vary between about 20metres and 70metres which equates to 130 to 470mm in N Gauge. In general mast spacing is likely to be closer together at junctions and on sharper curves.OHLE Structure kit (SET E12-1) dimensions:- Maximum height above baseboard (including base) - 62mm Overall length of structure (across the tracks) - 91mm Max width of structure/base - 8mm Please see the downloadable "OHLE Equipment Product Guide" in the Attachments TAB above.  

Read more less